My volume isn't recognized when reinstalling Mac OSX Tiger

I am reinstalling mac osx on my mac book black, because I got a folder with a question mark whenever I boot up my computer. When I'm installing the disks there's no volume to install mac osx. What do I need to do?

From the Tiger installer you need to open Disk Utility from the Utilities menu. On the left side, see whether your hard drive shows up. If it doesn't, your hard drive has likely failed and you'll need to purchase another one or take your macbook to a service provider to have it replaced.
If it shows up, you should try to repair it or reformat it, depending on whether you're worried about the data that's on it.

Similar Messages

Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater

HT3910 failed message when reinstalling Mac OS X Snow leopard

Failed and retry message when reinstalling Mac OS X Snow Leopard

From the install DVD, run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then reinstall the OS.

Reconnect Magic Mouse/keyboard after reinstalling Mac OSX

After about a week I finally managed to reinstall Mac OSX Snow Leopard...I took a RAM stick out at random and it worked...good thing there weren't any Genius bar appointments which suited me.
Anyway, now I need to connect a keyboard
I've already got my USB keyboard in it (The same size one as the wireless one...but this one's wired)
I've unplugged it, plugged it back in. I've dug out my wireless keyboard and nothing's happened (Yes, the green light blinks...)
I put my iMac to sleep, I turned it off, it still isn't working...
I could try and find a wired mouse/keyboard somewhere...but I can't believe my wired Apple keyboard isn't working with it ^_^
I'm surprised Apple think this wireless stuff is a good thing...I'm more surprised my wired keyboard won't connect...
It's an iMac 11,2 (I think - Whatever the late 2010 one was) and I'm running Snow Leopard.
Also - When's it safe to put the RAM back in? Or is it actually faulty and I need to get a replacement? How can I check?

Just to clarify, this is what I want/hope to do:
Backup my iMac using Time Machine (Complete)
Format the iMac to factory settings (Complete)
Reinstall Snow Leopard (Incomplete)
Restore some files and folders (Incomplete)
Maybe upgrade to Lion...if I'm in a good mood.
I'm mainly doing this because my hard drive stopped last week, and the hard drive fan sped up. I had to restart, went into safe mode and...I don't actually know what you're supposed to do in safe mode so I restart normally. The next day, I turned my iMac on and it had that bar below the logo as if it was booting in safe mode, the bar appeared to have stopped, so I turned the iMac off, and upon turning it back on, the bar was back, so I decided to leave it and it started fine. The next day, once again, the bar was there so I left it, but once it got to the desktop, Finder wouldn't load, I tried relaunching Finder a few times, then restarted the computer, if I remember correctly, it restarted and Finder wouldn't load again. I tried again, this time it wouldn't boot at all, I Googled it a bit and tried resetting the PRAM, SMC etc., then found that you can read what's happening when it's booting to safe mode, and many errors came up saying that some numbers were incorrect, after a few minutes, it said "Halting CPU" or something, and that's when it turned off. I then booted from the disc, and restored using the Time Machine backup. I wasn't pleased with the backup; some applications failed to load properly. I thought I might as well restore it and just copy a few files across, to save space and speed up the computer.
The many times I tried reinstalling Snow Leopard, it didn't work. I tried many things, and last night I decided to make a disc image or something to a USB stick. I don't think it was an image, because the tutorial I followed which worked didn't require that you create an image. After trying to install from the USB stick, it failed, I then removed a RAM stick, it finally worked! But my keyboard wouldn't connect...that's when I came to creatin this post, and I tried reinstalling again, it failed to reinstall, I tried removing the other RAM stick, still failed.
Last week wasn't the first time my hard drive suddenly stopped, it's happened a few times before, but the hard drive fan hasn't sped up upon the hard drive stopping, and it's also managed to start again and the computer to continue working a few seconds later. Maybe it is about time I take it to Apple...but my warranty's ran out so I'm not sure if they'll help me.

Problem reinstalling Mac OSX 10.5

I am having a problem with reinstalling Mac OSX 10.5 after putting in the disc to do it everything was fine it asks what language I want and then it tells me that it can not be installed on this computer. I am trying to install it on a MacBook bought last year it is an intel machine and I have always kept up on the system updates. I don't want to take it in to a store more because I am stationed in Japan and getting it to a store requires more work than it is worth. If there is any advice on what to do I would greatly appreciate it.

You need the original grey system discs for each Mac model you own, not just to be able to reinstall the OS but also to reinstall the model's bundled retail application software (like iLife, if included) & to run the very model-specific Apple Hardware Test it contains if that is ever required.
The retail Leopard discs do not include either of these capabilities, so unless you are desperate to get Leopard reinstalled on the MacBook, you should try hard to find the original MacBook system discs. Failing that, you can contact AppleCare & request a replacement disc set. Generally speaking, Apple will ship one to you for a nominal replacement cost if you can show that you own that model by providing its serial number or other proof of purchase information.
Regarding installing Vista or Windows XP, both the retail Leopard & system discs include Boot Camp, which includes a convenient utility to format the hard disk for dual booting. While complicated, this can be done without that utility but you still need the hardware drivers the disc contains to get the full use of the Mac's hardware when running Windows. I have no idea if say an iMac's system discs have the Windows hardware drivers that also support a MacBook or if this too is model-specific, so on that you are on your own.

I am trying to reinstall Mac OSX, but my computer does not read installation cd

Hello, I am trying to reinstall Mac OSX, but my computer does not read installation cd. After restart, I hold C but either eject cd or doesn't read and computer boots up normally. I even ordered a new pack of installation cd, but still the same problem. Is there anybody can help me fixing this issue, because my Macbook pro has lots of software problem and when I spoke to tech, they said it needs to reformat and reinstall the OSX to solve all my problems. Please help me to reinstall my OSX!

Possible solutions:
You need to hold the c key down before booting
You need to use the built in keyboard, you have other hardware connected
You need the machine specific 10.6.4+ disks for that machine, the retail 10.6.3 disks won't work
There is a firmware password on the machine preventing the at boot key command functions
Try the option key for Startup Manager to boot from the disk, right after the "bong"
Your Superdrive lense is dirty or not operating, other hardware issues
You have malware of some sort

How do I reinstall mac OSX 10.6.4?

how do I reinstall mac OSX 10.6.4?

Reinstall 10.6.4? exactly?
Only if you have 10.6.4 on machine specific disks that came with your computer (or you can call Apple for the disks)
However if you Software Update, Apple will bring your machine up to 10.6.8 automatically, with all the security and bug fixes. No choice to stop at 10.6.4 exactly.
10.6 is the Snow Leoaprd operating system, 10.6.3 or 10.6.4 or 10.6.8 is the updates to 10.6 that also occur when you run Software Update under the Apple menu.
So if your machine originally came with 10.5.x something and you upgraded via the 10.6.3 white retail disk, if you Software Update, you can't get to 10.6.4, it will just bring you to 10.6.8.
So if you want to reinstall 10.6.4 specifically, it would have to be the machine specific disks if your Mac orignally came with 10.6.4, else you will be force upgraded to 10.6.8 from any 10.6 version.
Now there are two ways to resinstall OS X, one way is to write say 10.6.8 over with 10.6.3 or 10.6.4 via the disks, and only 10.6 is overwritten, not your third party programs (most) and not your files. However you will need to Software Update, because your Apple related support files have been changed.
See #8 Reinstall Just OS X for that then Software Update to 10.6.8
Step by Step to fix your Mac
Another method is to wipe the entire drive or boot partition, then install 10.6 from the disk, then you don't have too Software update to 10.6.8 to get all the bug/security fixes if you don't want too.
I don't know what you want exactly, but I'll give you the links.
How to erase and install Snow Leopard 10.6
If your going to sell the machine this link will assist in gettiing all your data off
How do I securely delete data from the machine?
This is both methods explained, but I haven't seen it in awhile.
How to reinstall just OS X or erase/install OS X

I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

Nope. You can purchase a Snow Leopard DVD for $29.00 through an Apple retailer or ordering from AppleCare:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.

If you reinstall Mac OSX 10.5, does it erase all your files and settings??

If you reinstall Mac OSX 10.5, does it erase all your files and settings, if it does, how would you install iMovie by itself, because I accidenatlly deleted imovie

jd087 wrote:
If you reinstall Mac OSX 10.5, does it erase all your files and settings,
that depends what reinstall option you choose. an erase and install will erase everything. an archive and install will preserve user data and applications.
However neither one will reinstall imovie which is part of ilife which is separate from the OS itself. you can reinstall ilife only. there is no need to reinstall the whole OS. if you bought ilife separately then use the ilife DVD. if ilife came with your mac then insewrt install disk 1 that came with your computer, open it in finder and double-click on "install bundled software only".

MPEG2 codec not working in Final Cut Pro on Mac OSX Tiger

We have been using the File-export-Quicktime Conversion-MPEG2 codec for exporting of files from Final Cut Pro to DVD Studio Pro. On the new mac system that was just bought, the option does not show up.
Currently the system is running Quicktime Pro 7.1.2/ FCP 5 and DVD Studio Pro 4 and it is a new mac system running Mac OSX Tiger.
This problem has happened before on a mac running on an older system, but that was solved by reinstalling FCP and then DVD Studio pro and making sure that the QT Pro was of the latest version.
Right now, we have reinstalled everything the same way, tried installing DVD Studio Pro after, we have also done a full software update of the software over the net.
The codec is still not working, all the macs in the office are supposed to be upgraded to Mac osx tiger, but right now we can't do so, cos then we wouldn't be able to burn any DVDs.
Please help, thanks.

The installation of QT 7 is the culprit behind the missing MPEG-2 Export Component. But during upgrades, it doesn't always get rid of the file ... probably what happened on your older system when you upgraded to QT 7 or Tiger. Either the new system came with QT 7 preinstalled, therefore not including the Export Component, or if it was upgraded, the upgrade missed it.
-DH

MAC OSx Tiger loses connection info

I am running a newly installed Mac OSx Tiger OS on my G5 and have setup Oracle Calendar to connect to the server. The connection is maintained for as long as I have Oracle Calendar open. When I close it, Oracle Calendar reverts to a "new installation" state forgetting the settings just made. Is this a problem/bug with Oracle Calendar or with Tiger? Is there a work around? This is not a problem with other clients (e.g. Windows XP).

Hi
This is not happening on my G4 Powerbook with Tiger. I had Oracle Calendar installed before I upgraded -- not sure if that is relevant. I would look in your home directory in Library/Preferences and pull out any Oracle related preferences and start again. Other than that you could try using Disk Utility in /Applications/Utilities to repair permissions. Finallly if thats no good create a new User in System Preferences/Users and login in as that user and install -- if that works then you know there is some problem with your particular user setup.
Michael

I have a unwrapped copy of Mac OSX Tiger and i don't know what to do with it

Hey everyone,
So i don't have a Macpowerbook and i have a copy of mac osx tiger. It was originally my mom's dad's. How ever he has passed away and my mom's mom wants us to sell the osx tiger. What should i do?

If it is a grey colored disc then it is machine specific and only useful to somebody who has the machine model for which it was made. If it is black then it is a retail install disc.
2 years ago you could have sold a retail disc at a premium price. Now I am not so sure. Tiger is now 4th generation behind Lion, Snow Leopard and Leopard. Apple stopped supporting Tiger years ago and fewer and fewer other software packages are being issued that still run on Tiger. Firefox stopped supporting Tiger, Flash (used on just about every web site out there) is no longer being updated, etc. I think the writing is on the wall. One of my favorite web sites that uses Flash stopped working for me yesterday.
A machine specific disc is really handy for somebody who has that machine and completely useless to anybody who doesn't.
The best thing to do is go on e-bay and see what is actually being paid (not asked) for Tiger, remembering to make sure it matches the copy you have. If you do decide to sell it, make sure you tell the purchaser exactly which model disc it is. We've seen many people on here who bought a disc only to find it wouldn't install on their computer.

Installing Mac osX Tiger

Hi there my name is Taha and i am from Pakistan
I want to know if there is any possible chance of installing mac osx tiger into my pc i had recently bought the specification of the pc is Intel 2.66 core 2 duo with 2 gb ram 160 Gb hard disk and a 128 Mb graphics card
if not can you please give me the reason why it is not possible
Thank you

Hi Taha
Your question was asked and answered here.
Hypothetical question but why can't you install OSX on non Apple computers?

I'm using Mac OSX Tiger 10.4.11 and can't seem to find a version that is compatible

Please help me find the correct link to download a version that will work on my Mac OSX Tiger 10.4.11. The links from the forums take me to a page that doesn't exist. Help me, I'm desperate.

TenFourFox is for only for ppc mac, not intel mac, like slindquist's mac.
http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1006
see : http://caminobrowser.org/
if you like to think about it, the latest '''but unsupported''' firefox for your mac is 3.6.28
ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/3.6.28/mac/
thank you

My volume isn't recognized when reinstalling Mac OSX Tiger

Similar Messages

Maybe you are looking for