My volume isn't working it keeps saying headphones if I try to turn it up or down although my headphones aren't plugged in and nothing it stuck in the hole e.g fluff help please x
My phone has no volume and says headphones if I try to turn the volume up or down. My headphones aren't plugged In and there is nothing caught in the hole e.g fluff. Please help x
If you use headphones, do you get sound? Try inserting & removing your headphones a couple times to see if sound from the speaker comes back.
If not, it could be a hardware issue with the headphone jack and you need to bring the phone in to be checked out.
~Lyssa
Similar Messages
-
my sound won't work on my ipod 5. I plugged the speakers in and it works fine. When the headphones aren't plugged in and I turn the volume up it says that they are plugged in. Please help !
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. (this was already sugested) There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
IPod getting stuck at the Language Select screen. HELP PLEASE!
I couldn't turn my iPod on after charging it, so I reset factory settings. After that the buttons/clickwheel didn't work, and the only way I could turn my iPod on was with the hold switch, and then I would be stuck at the language select screen. When my friend suggested I do a hard reset (even though I didn't think the buttons worked) I did so and realized that I could also turn it on with that method, but I'm still stuck at the language screen.
I don't know what a "hard reset" is.
Have you tried a restore?
See: How to restore the iPod to factory settings. -
trying to upgrade itunes from 10.4 to 10.6.3 while in itunes app and nothing happens when i click download. could anyone have a suggestion of a possible solution? Thx
trying to upgrade itunes from 10.4 to 10.6.3 while in itunes app and nothing happens when i click download.
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
I need assistance in locating a lost or stolen iPhone...
Read http://support.apple.com/kb/ht4061 to find serial number. I would report it stolen and change my passwords. If you have find my phone app on and the phone is on and connected the internet you might be able to track it
-
Just got a new computer and none of the music from my old computer's itunes transfered when I transfered the contents of the old hard drive. Now I'm trying to transfer music from my ipod and can't get all the files....help please?
The iphone is not a storage/backup device.
It has always been very basic to always maintain a backup copy of your computer for this very occasion.
Have you failed to do this?
If so, not good, then you can transfer itunes purchases: File>Devices>Transfer Purchases
You may be able to purchase a third partyn program to get the rest ( not supported by Apple) -
I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?
Here's a good troubleshooting article about imessage "waiting for activation".
http://support.apple.com/kb/TS4268 -
My volume isn't working on music an other stuff on my iphone, like my lock sound isn't working neither is my typing clicks, my volume control has gone from my music too, help me, what is this???
Oh, I forgot to add that I've also tried repairing permissions.
-
I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
I updated to IOS 6.1.2 and the volume isn't working?
Hi,
I recently updated my IPhone to IOS 6.1.2 and the volume isn't working. The volume bar is also missing. Can anyone help?I have the same problem and I don't know what to do. It comes and it goes out without any logic. APPLE wake up...
-
I am trying to open a MPEG video clip using Quicktime and it wont let me, keeps saying a codec is required. So I click on tell me more, have downloaded Quicktime 7 on numerous occasions thinking this was the problem, and it still wont let me open in. Really confused! Can anyone help???
Try VLC.
-
i got an ipod from a friend and i tryed to start it up and it is stuck on the connect to itunes screen, it wont even pop up on itunes it says i have to put in my password to continue but i cant because it is stuck please help me!!!!!!!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?
Hi JenJen73,
If you are having issues with AirPlay streaming from your iPad to your Apple TV, you may want to take a look at the troubleshooting steps in the following article:
Apple Support: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Cheers,
- Brenden -
My signal is not working it keeps saying I have full signal then searching!!!
My signal is not working it keeps saying I have full signal then searching!!
Hello my fellow iPhone 4s users...
i have been going around the web for solution to the lost signal. Upon further investigation and diagnosis with my iPhone and other iPhone with a combination of chnage of sim between phones, resetting the network, hard reset and restoring a few times, it still persist. My analysis is that the iOS 5 >Settings>General>Cellular Data is the culprit. It does not have an option of switching between Edge and 3G (unlike the previous iOS lower than 5.0 or 5.0.1) It always stays on 3G. Now comes the trickiest part of my analysis. For networks having mid to low signal in areas, the updated dual antenna of the iPhone 4s switches automatically between 3G and normal signal. However, since it has no option to go down to Edge, it "automatically revert back to the original signal status". Sometimes from a very strong signal to a low signal area, it shows full bar of signal. but when you try to send an sms or make a call, it fails.
Conclusion:
I believe Apple has been digging deep with their softwate developers and checking the hardware of the iPhone 4s. And if my analysis is correct, they may have to incorporate the option of EDGE and 3G again.
Temporary Solution:
For low reception/signal areas, actually NONE... we have to wait for the update by Apple.
So either use our iPhone 4s as an expensive iPod on poor reception/signal areas and transfer our sim cards temporarily to another phone or have your phone put to AIRPLANE MODE on-off again. -
I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!
Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.
Maybe you are looking for
-
Display data from multiple document Libraries in List View Webpart
Hi All, I want to display data from multiple document libraries into one list view webpart(custom i have created) I went through the following link http://blogs.msdn.com/b/ramg/archive/2009/04/22/implementing-a-simple-cross-site-collection-list-view-
-
Help! Changing attachment path in SQL database
Changing paths in the dbo.dlnk table isn't too difficult, but I came accross something that has me stumped. Rather than a straight forward path such as \\servername\documents\ there are many that have a URL in the path such as http://servername/expon
-
Installing Windows 7 on Ideapad U430 Touch
I just recently got a Lenovo Ideapad U430, and I already don't like Windows 8, which came with it. I went to install Win7 x64 Professional today. I did what I usually do whenever I reinstall Windows: I downloaded the ISO from the Microsoft website, I
-
Call mode types: Synchronous and Asynchronous in ABAP process for a chain
Hello, I have a doubt about the call mode type for a abap type process in a process chain. It has two options: 1.Synchronous 2.Asynchronous Would like to know the diferences between these two; advantages and disadvantages of using them. Thanks in adv
-
More detailed documentation of the data upload page set ?
Hallo, Is there more detailed documentation available of the Upload Wizard and Data Set definitions? In particular: Is there a way to skip the Data Mapping part by providing a locally pre-recorded definition of the selected columns and their format,