My volume isnt working help, my volume isnt working help

my volume isnt working help, my volume isnt working help

Hey jusmile_,
Here is an article for you that will help you troubleshoot this issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Similar Messages

My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

Hi
frodojon wrote:
I either didn't do the correct mapping sequence before or I'm starting to wonder if it has something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel.
All this sounds like you are confused about the general nature of MIDI Continuous Controllers (MIDI CC). The MIDI specification allows for 128 different CC's: CC0 to CC127. Some are typically "preallocated" to 'standard functions: CC1= Modulation, CC7=Volume, CC10+Pan, CC11= 'Expression'. Some act as switches such as 'Sustain' CC64.
frodojon wrote:
Everything appears to be scaled from -63 to +64 if that's what you mean by scaling? What do you mean by MIDI CC7?
Mainstage works with MIDI CC's generally in a number of ways:
Some standard ones are automatically passed through to all MIDI/Instrument channels unless you specifically block them. Others are not passed through unless you specifically map them to something.
This mapping can be done basically two ways (with MS 2.2):
a) Make a Screen Control in Layout mode, and assign it to a particular incoming MIDI CC message. Then, you can map this Screeen Control to a variety of parameters such as the volume of a particular channel strip.
b) With MS 2.2, you can do the above Assign and Mapping directly, without the need for Screen Controls as an 'intermediary'.
frodojon wrote:
something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel. I
Yes.
It sounds to me like you have an issue where you have several hardware controls on your Keyboard set up to transmit the same MIDI CC. This is probably not a good idea, and it would be much better if you assigned them to transmit different CC messages (CC1 for Modulation and probably CC11 for the Expression (though you may want to set the pedal to some other number instead.
Once you are transmitting different CC messages, you will be able to Assign and Map much more flexibly:
for example, you could one to control the overall output volume at Concert Level in MS, whilst the other controls the volume of a specific channel within a Patch.
Your issue of layered patches is one of "Scaling": one Screen Control (assigned to an incoming MIDI CC message) needs to alter the ranges of different channel strips to different amounts. You can set this up by using multiple mappings for one Control, each set to work over a particular range (for example a goes from -20 to 0 whilst b goes from -30 to -20 etc.).
hth
CCT

My volume isn't working on music an other stuff on my iphone, like my lock sound isn't working neither is my typing clicks, my volume control has gone from my music too, help me, what is this???

My volume isn't working on music an other stuff on my iphone, like my lock sound isn't working neither is my typing clicks, my volume control has gone from my music too, help me, what is this???

Oh, I forgot to add that I've also tried repairing permissions.

Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset please help thanks!!!!

Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset please help thanks!!!!

Post this in the iPod Touch forum.
https://discussions.apple.com/community/ipod/ipod_touch
B-rock

Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

Hold Button, Help my Ipod isnt working...

basically, the hold button is off, my battery is charged but my ipod wont turn on.
so i plugged it into itunes, and the lcd display is on, and the message 'do not disconnect' appears. If i discontect my ipod nano its on (with full battery life) but i cant use it as it thinks its on hold (even though the hold button is off).
Ive tried sliding the hold button on and off, but nothing happens
i cant do anything with my ipod, i cant even seem to reset it.
What to do!?...
nano Windows XP ive had it less than a year.

I had the same problem.
Just put ipod onto a flat surface.
Then believe in that it can be reseted.
Then do reset it.
It will help I think.
It helped me.
P4 2800 i865pe

Right-click on Magic Mouse and Volume Controls on Wireless keyboard suddenly stopped working

I am running Mavericks 10.9.2 on an Late 2012 iMac.
One morning the right click on my Magic Mouse and the volume controls on the wireless keyboard stopped working.
These mouse and keyboard themselves seem fine; they work okay ehn used on a MacBook.
Everything else about the mouse and keyboard is fine.
This seems to be a problem what has been around for a whole, with a wide variety of solutions.
I have read
https://discussions.apple.com/message/16799039#16799039
https://discussions.apple.com/message/23474052#23474052
https://discussions.apple.com/message/19660884#19660884
and have tried
Clicking on and off the 'right click' checkbox in the Mouse System Preferences - No effect
Deleting /Library/Preferences/com.apple.Bluetooth.plist - No effect
Restarting in Safe Mode - When starting in safe mode, the computer crashes out and restarted
Resetting NVRAM / PRAM - Is it CTRL+CMD+P+R or CMD+OPT+P+R ? Neither work for me (I do try it using a wired keyboard, but never get the double chime)
Upgraded to 10.9.2 - no effect
Moved the /System/Library/Extensions/AppleHIDMouse.kext and AppleHIDKeyboard.kext and and back in (and re-authenticate) - No joy
Moved the /System/Library/Extensions/AppleHIDMouse.kext and AppleHIDKeyboard.kext from a working MacBook on same OS - Made the keyboard misbehave even more
Has anyone got any other cures for this?
Thanks in advance.

Here is what worked for me. My scrolling on the mighty mouse and a few buttons on my wireless keyboard weren't working properly. I reset the SMC, a link explaining the process is below. Hope it helps you too!
http://support.apple.com/kb/HT3964

My volume button to lower the volume on my iphone 4 is not working

My volume button to lower the volume on my iphone 4 is not working. I got a new phone case and I think it jammed my volume button. How do I fix this? The button to raise the volume is working.

Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

The volume on my Macbook Pro is not working ?

I've checked the settings in System Preferences and it seems everything should be working with my volume. NO GO! Help please

Is it not working across the board, or on very specific things (like You Tube videos)? The reason I ask is because there is a separate volume control on You Tube videos that must be turned up in order for you to have volume.
I couldn't figure out why none of the You Tube videos I was attempting to play didn't have any sound until I discovered this....It's in the bottom left-hand corner of the You Tube screen.
Just wanted to share!
Cheers,
GB

The Volume on my Mac pro is not working. I can't raise or lower the volume and sometimes it mutes by itself. additionally, the speaker button on the top right is garbed out.

The Volume on my Mac pro is not working. I can't raise or lower the volume and sometimes it mutes by itself. additionally, the speaker button on the top right is garbed out.

Hi there profreak,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
-Griff W.

I originally encrypted my hard disk. instead of just reformatting. I deleted hardisk entirely. Now I cant login. or do anything. I am in Afghanistan so internet is slow, I cant send it in the mail, and there surely isnt a apple store around here. HELP!!

I originally encrypted my hard disk. instead of just reformatting. I deleted hardisk entirely. Now I cant login. or do anything. I am in Afghanistan so internet is slow, so I cant reinstall lion software via internet. I cant send it in the mail, and there surely isnt a apple store around here. HELP!!

Didn't want to make you feel like an Idiot. Just pointing otu that most all externals come, these days, formatted NTFS as the world runs on Windows computers and at least the last 2 Win OS version will only install and likes to use NTFS formatted drives. So most drive manufacturers Pre-Format their drive in that format.
What do you mean "I'm Cloning Time Now"? I don't get the TIME reference?
You Clone the install of OS X from a working Mac to the External. The Cloning willl make that external Bootable (It will boot on like Mac computers).
Then when that is done disconnect that external and connect it to your Mac. Start your Mac and it should boot off that external. If it doesn't then Restart and hold down the Option key and select the external as the boot drive.
Once the your Mac starts from the external the cloning program should already by running as it was running whenn the clone was made. Select the external as the source and your internal as the destination. you may want to shut the cloning program down and first use Disk Utility to Re-Partition your drive as One Partition.
Hopefully that will get rid of the encryption you enabled and give you a clean freshly formatted drive to clone to.
Then start up the cloniing software and do as pointed out above.

The volume on my iPhone 4s doesn't work

Can someone help me with my volume? I can't get the Pandora volume to work & sometimes the ringer would work & sometimes not.

Try resetting your device. Hold down the Sleep and Home buttons until the screen turns off, then press the Sleep button again.

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable") and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
iPhone 4s iOS 5.1.1 (9B206)
Carrier AT&T 12.0
Modem Firmware 2.0.12

My volume isnt working help, my volume isnt working help

Similar Messages

Maybe you are looking for