My volume slide on my itouch keeps sliding down to silent???

my volume slide on my itouch keeps sliding down to silent???

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. Done
- Restore from backup. See:                                                
iOS: How to back up                                                                                     
- Restore to factory settings/new iOS device.             
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
  Apple Retail Store - Genius Bar

Similar Messages

  • My volume slide on my itouch keeps sliding down to silent...any suggestions?

    While playing my iPod on my iTouch, the volume control button won't stay put and keeps sliding down to mute.

    Try resetting the iPad first. It will not cause any loss of data.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that does not work, reset all Settings. Settings>General>Reset>Reset all settings. This will cause no loss of data either, but you will have to enter all of the iPad settings in the settings app again.

  • Volume Slider in Sound Settings Keeps Changing!

    I usually keep the volume slider in settings/sound at max so I can hear the ringer when I have it on. I always did this with my original iphone and I had no problems with this. With the new phone every time I set the slider to max it will revert back to about 2/3 the way across. It does this every time I put the phone to sleep and then reawaken it, every time I take or make a call, essentially every time I do anything after exiting the settings feature. I have done the reset by holding the top button along with the Home button until the Apple logo appears and this doesn't help either. Has anyone else seen this or have a solution?
    John

    I just noticed this on my wife's iphone which was my original iphone that has been updated with the new software. I'm thinking it has something to do with the new software, that phone never did that with me prior to all this.
    John

  • Scroll bar keeps sliding while using internet

    While using the internet, on certain web-pages, the scroll bar keeps sliding down or up and page will turn dark in color. I have linux operating system. What is causing this and how can I fix the problem.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Can you post a link where you see this?

  • The volume slide keeps disappearing.

    The volume slide keeps disappearing and i click on the airplay button and it gives my the option of AppleTv and Dock Connector but it's not connected to a Dock. The sound works when i connect headphones/earphones and also works when i DO connect it to a dock, it hasn't seemed to effect the calls either but notification sounds and playing music/videos in apps or iPod don't always work. This only happenes 70/80% of the time...

    Hello BethanyFromIrl,
    We've an article which provides troublehooting steps that can help get your iPhone's speaker working consistently.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    Allen

  • Volume slider keeps dissapearing - iphone 5

    I Have an iPhone 5 and am having issues with the volume slider, as it keeps dissapearing.
    Restatying rting the phone by holding down the home and standby button temporarily fixes the issue but it doesn't take long for it it come back.
    Cant hear any sounds other than when the phone rings or an alarm is going off.
    the slider reappears though when headphones are Inserted.
    A couple of months ago I took my phone to the Apple Store for them to clean out both the headphone hole and the charging hole as they were full of dust, coukd this be related to my new issue?

    Hey dargan,
    Thanks for the question. Dust and debris can definitely lead to this issue. If there is any sort of debris in the headphone or lighting port, the phone might think that there’s an accessory connected. For more information, see this resource:
    If you don't see the iPhone Volume slider - Apple Support
    http://support.apple.com/en-us/HT203029
    Thanks,
    Matt M.

  • ITouch not recognising headphones(no volume slide bar)

    hi I have an ipod touch 32GB 1st Gen running OS 3.1.3
    and recently a new problem has arisen.
    when my headpones are plugged in, they play very quietly and I have no option of adjusting the volume, slide bar just isn't there.
    I have tried various headphones, and the ones I use with my ipod I tried on my laptop and they work fine.
    this has been happening for about 2 weeks now, and sometimes after resetting my ipod (holding lock and menu button at the same time) it makes it work but very raerly, and sometimes after disconnecting and re plugging in the headphones the slide bar appears, however nearly always asoon as I stop using the ipod and then go to use it again the problem returns.
    and now for past 2 days I've been unable to get the slide bar up at all.
    Anyone know ways to fix it.
    also if it's not possible to fix from home, would I be able to get it repaired by apple despite I do not have warranty for it (bought it second hand off ebay)
    thank you

    Sounds like you need a new logic board.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HELP!! Volume slider dimmed in track info--using Shure 8900W mic + iMic

    After much back and forth at the Apple Retail store, I was talked into buying a Shure 8900W microphone plus a Griffin iMic for recording vocals in GB3. I'm on a MacBook Pro running Tiger (10.4.7).
    I've done all the right stuff--in both system preferences and GB preferences the iMic is recognized and selected. I know GB recognizes and hears the mic because I see the feedback in the track, but the sound isn't coming out.
    I've noticed that the volume slider in track info is dimmed, and I can't seem to do anything to change that. Is that the problem? Can I do anything short of buying a whole new mic?
    Thanks in advance for your help.

    Is the monitor (in the Track Info) switched on or off? Have you checked what driver is being used for audio output (in the GB prefs)? If you can confirm that sound is being picked up/recorded by the mic (either by seeing the green/orange/red level monitor respond to input, or by seeing recorded regions with audio waveforms displayed), then it should be some relatively simple setting somewhere that's keeping you from hearing stuff.
    Sound is definitely being picked up/recorded by the mic. I do see the monitor responding to input, and the waveforms are registering sound when I use the mic. I just can't find the relatively simple setting that is keeping me from hearing stuff.
    Interestingly, after I posted this help message, I connected my mic and iMic to my PowerBook and was able to easily record and playback in GB. Does this issue have something to do with the Intel transition?
    Thanks for all your feedback.

  • Volume slider quit working

    Somehow my volume slider quit changing volume. Slide it all the way left and the volume goes to zero. Slide it even infinitesimally right from the zero position and the volume goes to some low volume. Sliding it all the way right does not increase or otherwise change the volume. Any idea how to restore functionality to the slider?

    The rocker on the side does indeed move the slider on the display. When the slider hits far left (zero) while depressing the lower portion of the rocker all audio terminates. Otherwise there is no effect. Likewise holding the upper portion of the rocker moves the slider right. There is no change in volume whatsoever.
    Is there some way to do a hard reset of the device software?

  • Certain apps causing the volume slider not to function properly.

    I recently purchased an iPod touch 3g. Everything was working great until I purchased this app. I got Earthworm Jim and the game runs great, no problems playing the game. Now when I quit the game and go to my music library and play a song or a video the volume slider won't work properly. When I try movingIt, it keeps moving back to it's previous position. To fix the issue I have to either plug the iPod to my comp or restart it. Now this only happens after I quit "Earthworm Jim" or "Cooking Dash". Two games that has in game music (a feature that let's you play ur own music while playing the game". Anyone experiencing this issue?

    I have the same experience with the sticking volume slider, after I played Asphalt 5. This game also has in game music, but the problem also exists, if I let the game play the generic music of the app.
    Seems to me, that this is a common app vs. OS software trouble and the only solution, that works on my iPhone, is to turn on the voice memo app and quit it. After that the slider works well in the iPod app.
    Apple, please develop an update to fix that issue soon!

  • Volume and Volume Slider Missing

    Recently, I dropped my 32GB iPod Touch 4th Generation into a bowl of water. I had an Otterbox Survivor Case on it, however, the rubber pieces were missing where the headphone jack and the charging jack are. After drying off my iPod and placing it in a bowl of rice, I soon came to the realization that my volume slider was missing. Panicking, I attempting pressing the sidebar buttons, sliding my fingers across where the slider should be, even turning off and restarting my device.

    If/when the iPod is totally dry:
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a hardware problem caused by the water.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price

  • Volume Slider Control

    I am experiencing this problem quite frequently. When I enter the iPod on my iPhone 3GS and try to either turn the volume up or down by sliding the volume control it turns the music up for a split second then springs back to where it originally was (as in position on the slider bar). I can turn the volume up using the buttons on the side of the phone but would like to know why the volume slider control isn't working and if there is a way to resolve this issue.

    Reset your iPhone by holding the sleep and home buttons simultaneously until you see the Apple logo (you must ignore the Slide to Power Off slider). That should take care of things.

  • My speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?

  • Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • How to fix my volume slider so i can see it on the screen

    I have a dv6-1355dx and i had to restore it to the factory settings and ever since then when i try my volume slider it works still i just dont see it on the screen anymore any one that knows what this could be would help me out alot

    Welcome to the HP Forum!
    bpc4587 wrote:
    I have a dv6-1355dx and i had to restore it to the factory settings and ever since then when i try my volume slider it works still i just dont see it on the screen anymore any one that knows what this could be would help me out alot
    What is the installed operating system and version (32-bit or 64-bit)?
    Do you mean the volume slider from the taskbar or the one from the audio software/
    The audio driver can be found on the driver and software download section of the web support portal for your notebook.  This is the page you seek. Use the dropdown to select the correct version of the installed operating system for your notebook. Right-click Computer and select properties to see which version is installed in your notebook.
    Kind regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for

  • J4W 9.2.6 and Jabber for Mobile 9.6 : Certificate Management

    Hello, I have deployed 2 Cisco IM & P servers 9.1.1. When client jabber log in, the server presents 3 certificates (IM&P Pub, IM&P Sub, CUCM) to be validated and saved in local trust store. What are the certificates that I have to sign against the Pr

  • New Patch (Web)Forms  with Sun's Java Plugin 1.4 certified - when?

    Hello, We are waiting for the new patch version for Forms6i or Forms9i with Sun's java Plugin on client platforms like Linux,... certified. But when will it be available? Peter

  • ITunes WONT recongnize a blank CD

    Okay so here is my problem... I decided to burn a CD with iTunes one day, and I have done it many times before. This is a brand new laptop so I know it not my drive because it gets moderate use, and it works fine with other programs. I put in a CD on

  • How do I get rid of background color in a table?

    I insert a table and it shows up with a blue background.  The properties panel shows no background selected.  I changed it to a white background but nothing happened.  I made a new class named tableformat, it took all the styles I applied to the clas

  • File extension not changing when Save as

    Hi! I have a strange problem. For example; I have a .psd file open and want to save it as a .jpg file. I choose Save as. The dialogue Save as opens and displays the file name. But when I choose jpg as File format the extension behind the File name do