My volume stopped working

My iphone 4- volume stopped working. I cant hear my phone ring, cant hear text messages or my alarm, and cant play music either. If I see call coming in I can hear and talk.

Can you be a bit more specific?
Is it limited to your volume buttons, or is the GUI volume control also affected?
What OS version are you running? Was there anything that precipitated the problem?

Similar Messages

Ear buds remote and volume stop working on 4th gen ipad

ear buds remote and volume stop working on 4th gen ipad

Hi, seadarunner.
Thank you for visiting Apple Support Communities.
I would need more information on what you mean by your EarPods are not working to provide a better answer. However, here is an article that may help with this issue.
If you hear low or muffled sound from your Apple EarPods
http://support.apple.com/en-us/TS4395
Cheers,
Jason H.

Volume stopped working on my macbook pro

sound stopped working yesterday on my macbook pro, Does not work with head phones either. Is it the sound card?

Some things to try:
Go to System Preferences/Sound/output and check if if you can select built in. Make sure volume is up, and mute is not checked
Try taking a set of headphones and plugging them in and out several times (there is a micro switch that sometimes gets stuck)
Go to applications/utilites/Audio MIDI set up check and see if built in is selected, if possible try to select it, make sure volume is up and mute is not checked.
Try a NVRAM/PRAM reset:
Power off, power back on holding OPTION + COMMAND + P + R keys
Hold until you hear the start chime 2 times, then release, reboot

Remote volume stops working but still changes channels

my remote volume will stop working after a while and i always would reprogram it. fios told me all i have to do is press "tv" and "volume" same time and it will work. this isn't working? anyone have remedy?

There are many considerations for these remote control issues. The Verizon Supplied (Motorola or Phillips made) remote controls are designed to first work the cable company’s set-top-box, and then operate as many TV’s on the planet that it possibly can. Meaning it might never quite bas a good with your TV as the remote that came with the TV.
Still there’s hope! Especially if it used to work! Here’s some things to try…
1.) Is it possible the remote got switched from one room to another? Think of these cable-company supplied “universal” remotes as being married to the TV not the set-top-box.
2.) Try fresh batteries, the TV may need more “punch” from the remote than the set-top-box.
3.) Re-Program the remote, instructions for this are at:
http://netservices.verizon.net/portal/link/help/item&objId=14933
for the black Phillips remote or at
http://netservices.verizon.net/portal/link/help/item&objId=14934
if you have the gray colored Motorola remote

Feedback When Changing Volume Stopped Working

I have "Play feedback when volume is changed" checked in System Preferences > Sound > Sound Effects, but this has stopped working when I use the volume keys on my Apple keyboard. I would try trashing the appropriate preferences, but I can't find the right preferences file. Any help/suggestions would be appreciated.
Thanks,
Emily

I had to shut down my iMac because of a thunderstorm, and when I turned the computer back on, the feedback was working again.

Why does my volume stop working?

When I open music on my iPhone 4S, I choose a song and the volume control is grey. It will not play out loud or through my headphones even though it says it's playing. I have tried to reset my phone and have called apple. I have no idea what to do. It comes in waves. One second myosin won't play and then it works fine. But only for seconds before returning to the grey volume control

Go to Apple menu / About This Mac / More Info... / System Report ...
Under Hardware (left column) select audio. This is what I see:
Do you see the items listed on the right? If you do not, it is a hardware problem.
(Mine is a MB Pro, but you should see pretty much the same on a Macbook.)

Volume stopped working...

Recently I used my headphones in my iPad and since then, the volume does not work on anything. I noticed at first it said headphones on the volume control but there were no headphones attached. I turned it on and off and nothing. I reset all the setting back to factory, nothing. When I go into settings, its turned on and if I switch the sound effects, I hear those just fine. But nothing else works... no games, music, allerts... nothing. Does anyone know what is going on?
I am using the first iPad... 64gb 3G.
Thanks...
Jayme

Try a PRAM reset:
http://support.apple.com/kb/ht1379
Ciao.

Volume in my iPod stop working?

My iPod volume stop working. There is no voice except the ring tone.
Would u please help. Thanks

Do the headohones work?
Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still problem then time for an appointment at the Genius Bar of an Apple store.

Why does my volume not work

A couple of days ago my phone volume stop working. When I call it works fine, everything doesn't work. I tried to restore my phone but it didn't work and then I disabled my restrictions but nothing changed. I do not know what to do.

Is it your volume buttons that don't work or just the sound? If its your volume buttons, then that's a hardware problem. If its the sound, check to see if your phone is on mute by double tapping the home button and swiping to the right.

IPod Nano - volume not working

My 3rd generation Ipod Nano's volume stopped working after a software update. I have tried the 5 Rs: Reset, Retry, Restart, Reinstall, Restore
1. I checked the head-phones
2. I tried resetting my iPod.
3. I removed and reinstalled itunes to my computer.
4. I finally restored my Ipod Nano to it's original settings and the volume still does not work.
Thank you in advance for your assistance.

Try restarting your device. If that doesn't work, take it to an Apple store. If it is less than a year old and just stopped working, they will replace it for free (be sure to back it up to iTunes first). If you dropped it, you will have to pay because Apple will not replace a device due to "Human Error." If it is more than a year old, you will either have to pay to get it fixed, or have to pay to get it replaced.

My HP Sleekbook stereo volume only works intermittently

I never had any issues. Last week I had a standard update for Windows 8 and I also plugged in earbuds to keep noise down where I was as while using my laptop.
Since then it keeps turning on and off. I ran all of the device trouble shooting test in the Control Panel and I checked the the IDT sound device was enabled. It says the driver is fine.
When I run the trouble shoot test for the Hardware it actually turns the stereo volume back on. The F11 does not have the orange light either when I press it when the volume stops working.
When I click on the icon for the speaker and go to mixer it shows volume control for device or HP speakers, applications or system sounds, and HP Connector Remote user. I also Noticed when I was listening to audio via the internet it would display that as well so I could adjust the volume.
I have the HP TS Sleekbook 4
Serial Number CND3122588
Product Number D1A99UA#ABA

As a follow up I also noticed that I constantly get the message that the device is in use when I run the speaker set up configuration test.
Thanks

Toshiba Satellite L655 Sound Stopped Working

So, yesterday it was working fine. Around 7pm, the volume stopped working. I would turn it up and everything, NOTHING happened.
Now I can't even open the volume thing. It's just an icon, that when i click on, nothing happens anymore.
What do I do?

The probable reason none of the regulars have responded to this thread is that none of you have posted your full model name/number like Satellite L655-S5065, or your products part number like PSK2CU-00V001. Look on the Toshiba label on the bottom of your computer. We can probably safely assume you have Windows 7 64bit, but we really need your OS Version as well.
Let's try a proper system reset. Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, at the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, then try to boot into Windows again, and then see if this brings your sound back.
If that does not work, reply with all the above info for your individual systems.
Mike

HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section.

The volume on my ipod touch as stop working

ok after i updated to 2.01 the volume on my ipod stop working its stuck up to the max. i try setting the volume limit to like half way and it was up as high as it could go. so when 2.02 came out i thought if i updated it mite fix it but it didnt.
but if i go it the an app like iband i can turn the volume down on that but it doesnt work for my music and it soo annoying its like to loud to listen too
soo if anyone had any ideas that would be great
thanks

I had the same problem...I went into settings, music, volume limit...Mine was initially set to off, so I toggled it to on and lowered it a little...I was then able to control the volume...Good luck!

HT1459 my 6th gen nano stopped working and is not recognized by my computer or in itunes. I tried rebooting with directions, it still doesn't work. I've tried pluggin into power source and pushing the on off button with the volume down button- this doesn'

My 6th gen nano ipod stopped working. I figured it was because it was next to my sweaty body, so put it in rice. I sought help from internet and tried all of the troubleshooting steps; i.e pushing down the power button and the volume down button consecutively, plugging it in to a power source, waiting 10 minutes and pushing the buttons while it was plugged in. Nothing has worked thus far. Is there anything else that I can try?

Hi there Betsyell,
You may find the troubleshooting steps in the article below helpful.
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
-Griff W.

My volume stopped working

Similar Messages

Maybe you are looking for