My volume won't work anymore. It stays gray and won't go anywhere. Help?
I've tried to turn up my volume but when I do it says it's turned all the way up but keeps a circle with line through it underneath the bar and it won't let me turn up or down the volume. It doesn't play anything, and in the bar up top it is grayed out, and still won't let me make it louder or anything.
Try quitting the app and then reopening. To quit an app: double click home buttom, then hold down the facetime app until it starts to jingel and a red circle should appear. Clicking that circle will quit the app! If it still does not work then try reseting the device itself!
Similar Messages
-
i dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?
Steven ~ Welcome to the Support Communities. The following may be useful for next time...
AppleCare+ for iPad extends your coverage to two years from the original purchase date of your iPad and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee. Note: AppleCare+ must be purchased within 30 days of the date you bought your new iPad.
iPad mini cases from Tech21
iPad mini screen protector from Tech21 -
With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.
Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?
-
My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything
I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong. -
HT201210 My Ipod will not work anymore its just the apple showing could you please help me restart
My Ipod will not work anymore its just the apple showing could you please help me restart?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just updated my Mac Mini to latest software, tried updating GarageBand. It downloaded but now it gets stuck downloading the 'essential sounds and loops'. It always worked fine before I updated and would really appreciate some help. Thanks
I just updated my Mac Mini to latest software
You mean, MacOS X 10.9.2 and GarageBand 10.0.2?
How far does the download proceed? Do you get an error message?
Try to resume the download as described here: http://support.apple.com/kb/HT4485 -
Why can't I play a certain song on my iPad Mini when it was working the day before, but after syncing it to my iMac, it won't work on both my iPad and my iMac. Plz help
Accidents happen, and apple can certainly assist you with replacement of said device. Most manufacters would tell you to buy a brand new retail unit, apple will charge you about half price for a replacement unit. I agree its unfortunate that it happend, but expecting a free replacement is just going to lead to disappointment
-
Updated my iWeb page and now it won't publish. "Publish Site" stays gray. What to do now? I'm not using Mobil Me. FTP published. Workd before. Haven't a clue now.
Try making a minor change to that same page, like moving an object a couple of pixels one way or the other, and see if the File ➙ Publish Site Changes menu option will work for you.
OT -
until recently everything worked fine.
running xp with two profiles (mine/wife's)
wife's profile has virus, tried using Malwarebytes but I think we still have problems. As an aside, the Malwarebytes db won't update
Program_Error_Updating(12007,0,WinHttpSendRequest)
I suspect all three are related.
Reinstalled Firefox 3.6.13 - no change.
ThanksTry disabling Firebug and see how it is.
-
I closed my ipod and it is stuck i cannot open it anymore and not even able to recharge it.Even when i connect it in the computer it does not work.What is the problem with this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am running version 24.4.0 I can send and receive email but when I get an email that has a hyperlink that I click on and go to. But we don't go anywhere, I tried running in the safe mode that that help, tried rebooting that didn't help. I have an earlier version on my laptop that works fine.
https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working
-
Can't get cnet+ to work. Have uninstalled and then re installed and it still opens and then closes . Any suggestions ?
Your serial number is available form the Adobe website. Sign into your Adobe Account on the Adobe website and click on the My Adobe link at the top of the page. It will take you to a page to find ALL of your serial numbers for products you have registered.
-
Relink does not work; all events staying red and files disappear!
A very bad bad story...
after continuis spinning ball (i hate this thing what so often comes to please me) I used "forced stop" fcpx. (i could not else)
after restart fcpx all the events are in red.
after restart mbp + fcpx: all events are red again... that looks bad to me...
i tried more than ones the relinck function:
no result at all. I saw actions being done, the harddisk drive was working but no relinked files in the events. (i tried one by one, there are 9)
An other attempt with relinck: a small event (about 9 files) and not important for me seems to be going well, the red clips disappear in the event window but .. all clips disappeard to!; a totally empty event window... I looked with finder into the map and believe it or not: all the files were gone! I could not believe this thinking i made a fault. Thus:
I repeated this action with another map (and copied the files in it first) and the same happens: totally empty.
I tried to re-import from camera/archief: no result.
The last thing to do was:
to open a new event and "imported from file": the clips came into the event window but .... red...
So, in my opnion there is something very very wrong...
What can i do more to restore the connection because the most events have a content according to the finder.
BTW, i know there is a lot of discussion about this matter and may be with the solution but i can 't find it... (even with the searchfunction)
For any help or suggestion: Thanks!
Bruce.
(I am going to sleep now, it is over midnight here)That's not stupid, I happened to me too yesterday.
How are you supposed to know that the files fcpx is pointing out are originals or Proxies. You have to go check in the Prefs.
Wishlist: Since choosing to read fullres or proxy media is an application wide feature, it should appear clearly somewhere (in the Timeline bar, the Library, or the Inspector) as a reminder.
A couple of time I have wondered which files fcpx was reading. The only way to know is the cmd-F (Locate in Finder) command. The Inspector doesn't give any answer to that. -
my iphone is unable to play music out loud, and only works with the assistance of speakers or headphones. I know it can play out loud as the alarm/ringtone etc all work, and also when I put my phone in speaker docks, just before it connects it plays mystic out loud through the phone speakers. Just not when I want it to!! Any help would be much appreciated
Jailbroken?
-
What do I do I am not able to listen to any music or videos outloud
Hello Gemese,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD
Maybe you are looking for
-
When I plug my iPhone 4 into my laptop, a box pops up that says "The iPhone "iPhone" cannot be used because it requires iTunes version 11.1 or later. Go to www.itunes.com to download the latest version of iTunes." I did so, but after downloading this
-
XML Messages in "Scheduled" status
Hi all, The case is at ERP side running transaction SXMB_MONI, some XML messages from XI to ERP are found in "Scheduled" status. Around the same time, siimilar messages using same receiver interface are processed successfully. When we manual restar
-
Viewing multi-cam monitor for multi-cam sequences not on track 1
Hi, I just found out that the multi-cam monitor in the Program Monitor goes blank if the multi-cam sequence is not on track 1. Is there a way to fix this? Thank you in advance.
-
Hello, The SAP_COLLECTOR_FOR_PERFMONITOR Job has been cancelling for last two days onwards. Job log overview for job: SAP_COLLECTOR_FOR_PERFMONITOR is ABAP/4 processor: COLLECT_OVERFLOW. Actually We have set the stat/tabrec parameter value 5 constant
-
More than one copy of Itunes on one pc
I have three family members who have ipods. Can each of us have a different copy of Itunes on one PC??? If not, how can I update the three ipods seperatly with different music??