My volume works for notifications and not music, help!

My volume won't work, but my alarm and notifications will :/

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

Similar Messages

  • Home sharing works for movies but not music?

    I have Home Sharing turned on my imac.  It works fine streaming movies and tv shows to my Apple TV, Mac Mini and ipads.  The media is stored on a NAS.
    My problem is with music.  When on the ipad, I open the Home Sharing folder. Only half a dozen albums show up.  The artwork is all mixed up.  On Songs, there are several hundred, but they are not properly listed (eg a hundred or so under "A", but they do not begin with the letter "A".
    I've tried retarting everything.
    I've tried deleting the library and rebuilding.
    I've tried creating a new library on imac.
    I've tried creating a new library on NAS.
    Nothing seems to work.
    Any ideas anyone?
    thanks

    After digging and reading since I posted this question, I finally found the issue. My Cisco VPN client was set to stateful firewall (always on). When I turned off this setting, all machines worked for iTunes sharing. The Vista box was coincidentally working because the Cisco VPN client 4.6 didn't work on Vista.

  • Airport express works with ethernet and not wifi HELP

    ive just changed my router to a Dlink on aol, ive connected the airport express to the new wi-fi as well as my macbook and iphone. The light has gone solid green but wont connect to the mackbook or iphone to play music. If i connect with a ethernet lead it works. Then if i take the lead out it still works for a few minutes then cuts out. Without the ethernet my mac doesnt find find it wirelessly.
    Ive reset it several times but it just doesnt seem to like it. Please help!!

    After Grant pointed out the DNS thing, I started to check that part, and I noticed something funny. I called Apple Support regarding the problem, and now it's solved
    Here is my experience:
    1. My Airports worked fine when home, but not at work.
    2. Checking the LAN DNS addresses I received three addresses. 2 in the 158.xx... range and one in the 129.xxx... range.
    3. The Airport Extreme and Airport Express does only support two DNS addresses, and since the two 158.xx... DNS addresses came first in that range the 129.xxx... was left out.
    4. I manually changed one of the 158.xx... addresses to the 129.xxx... address I got on my MAC / PC when I connected directly to the wall and did a "ipconfig /all" on the PC. The three same addresses is listed under network - airport on the MAC.
    5. Now suddenly it all worked. This due to that the two 158.xx... addresses seamed to be internal addresses, and the 129.xxx... address was from outside delivered from our operator.
    Summarized:
    When you receive 3 DNS addresses you MAC and PC can handle it fine, but your Airport not. Find all your DNS addresses and write them down. Enter Airport Admin Utility and do a manual setup. Change one of the two equal address to the third address. Most probably listed as the last DNS address when you are connected directly and type e.g. "ipconfig /all" on your PC or you enter the network settings.
    Best regards,
    Bouw

  • How to sync apps for ipone and not music, but keep music for classic

    Hey
    I am getting the iphone 3G, 16gb, and I have an ipod classic 80gb. I want to keep everything I have on the classic the same; the music, videos, games. However, for the iphone I dont want to add the music of videos, just the apps.
    Is there a way to do this? If so could yuo explain in detail, thank you.

    As with your iPod when connected to iTunes, the iPhone has various tabs for your iPhone sync preferences with iTunes. Your iPod and your iPhone can have different sync preferences.
    If you don't want to transfer any music to your iPhone, don't select Sync Music under the Music tab for your iPhone sync preferences. If you don't want to sync any video to your iPhone, don't select sync Movies and TV Shows under your iPhone sync preferences.
    Under the Applications tab for your iPhone sync preferences, you will select Sync Applications with the following options below.
    All Applications to transfer all available applications to your iPhone, or choose Selected Applications followed by selecting the applications in the window below that you want transferred to your iPhone followed by a sync.

  • Drill up only works for children and not for descendants

    Hi,
    I have made AW available from bibeans - it means I am using CWM2. But,
    when I created a crosstab, I can only drill up the children but none of
    the descendants. For example,
    i) I have geography dimension in the row edge.
    ii) I can drill down 'World' and see 'USA' and 'CANADA'.
    iii) I can drill down 'USA' and see 'New York' and 'San Francisco'.
    iv) When I drill up 'World', all the descendants of the 'World' should
    be drilled up. But indeed, only 'USA' and 'CANADA' has been drilled
    up and 'New York' and 'San Francisco' are still there in the row edge.
    Does anyone have any idea about this problem? Thank you.
    Best Regards,
    Seiji

    Additional Information:
    I am using
    bibeans903_pre
    jdev903_pre
    Oracle Database 9.2.0.1.0A for Sun Sparc Solaric 32bit
    Thanks
    Seiji

  • Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!  SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

    The issue:  Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! 
    SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
    The cause:  It is now clear what caused this problem.  For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.).  In May 2012 I decided to make some of them one hour  events so I could add alerts to remind me of the event.  I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
    The symptom:  Syncing stopped working for the calendar but continued working for contacts and notes.  I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious. 
    The failed attempts:  I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance.  From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012.  Events before May were in both Outlook and the iPhone but events after May were only one or the other.  Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious.  MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things.  We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
    The fix:  After 18 months of frustration, MANY  hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync  problem and it indicated all day events were related.  I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events,  sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
    After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync.  It synced for the first time in 18 months! 
    Problem occurred May 2012 – fixed Nov 2013

    Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
    It will recursively remove all '_ModGrp...' folders
    Sub RemoveFolders_Click()
        Dim oOutlook As Outlook.Application
        Set oOutlook = New Outlook.Application
        Set objNameSpace = oOutlook.GetNamespace("MAPI")
        Call CleanFolders(objNameSpace.Folders)
    End Sub
    Sub CleanFolders(objFolders As Outlook.Folders)
        For i = objFolders.Count To 1 Step -1
            If Left(objFolders(i).Name, 7) = "_ModGrp" Then
                objFolders.Remove( i )
            Else
                If Not objFolders(i).Folders Is Nothing Then
                    Call CleanFolders(objFolders(i).Folders)
                End If
            End If
        Next i
    End Sub

  • HT5278 i did this update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though! ne1

    i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

  • Why is my airportxpr only working with Itunes and not with another music program

    why is my airportxpr only working with Itunes and not with another music program??
    I can not select/see other outputs in my sound selector.

    You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
    for Windows - http://rogueamoeba.com/airfoil/windows/
    for Mac - http://rogueamoeba.com/airfoil/mac/

  • I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Skype number is suddenly not working for me and my...

    Skype number is suddenly not working for me and my colleagues to RECEIVE outside calls.  Any ideas?
    When I try to call my skype from my cell, it doesnt ring on either end.  It appears connected on the cell phone since the counter clock for the call is increasing, but it doesnt ring or connect.
    This is the same for me and at least 2 of my colleagues.  It was working all day, till suddenly it did not.
    When outside people call, it just gives us a missed call or voicemail email, but does not show a missed call on our skype.
    When I call an outside number from skype, it connects.
    Thanks for any help ASAP!

    I think this might have been happening to me earlier.  If you wait like 30 seconds when you called a machine said "All circuits are busy. da da da".  I was looking for an answer and google only brought stuff from like 2010.  It's working now after an hour or so.
    Sucks cause I use skype for work and was desperate to find a quick reponse but couldn't.

  • Can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

    can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

    See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

  • Hello, my ipod nano 6th generation is with the black screen, now restored, already pressed for 8 seconds and decrease volume botação start and not resolved, can someone help?

    Hello, my ipod nano 6th generation is with the black screen, now restored, already pressed for 8 seconds and decrease volume botação start and not resolved, can someone help?

    I am currently having this same problem. This nano lasted me less than 2 years.

  • HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Maybe you are looking for