My "W" Key "Clicks" when barely any pressure is applied

I know this sounds weird, but my W key on my keyboard clicks loudly when hardly any pressure is applied (not even enough to depress the key). I was wondering if any of you had a possible fix for my predicament. It's not a huge inconvenience but it is very annoying in classes. Any help would be appreciated!
MacBook Pro 2.16 Core Duo Mac OS X (10.4.8)

Just live with it. Most do it and the ones that don't probably will start to do it over time. Like you say, if you get a replacement it's a whole new can of worms you'd be opening and you may end up with numerous faults. Sure they shouldn't do it and the build quality is a bit suspect but at the end of the day it's just a back panel that is creaking - many, if not all phones by other manufacturers have a similar issue.

Similar Messages

Minimising Key Clicks When Recording

When I record the audio for a slide
I click on the red record button, and this brings up a window.
Next I press the record.
I make the recording and then click on stop
Then I click on Save
The a window pops up to ask "Do you want to extend the display time to n seconds to match the new audio?" - I always click on Yes
Then I have to click on the Close button to close the recording window.
Is there anyway to stop Captivate asking me if I want to extend the time (step 5) and just have that happen automatically and also have the window close on save without me having to close it, (step 6)
When you are doing a large number of short slides these extra key depressions are tedious.

Accepted.
No I have never tried recording several slides. Everything I am teaching is one step at a time per slide. The audio per slide works well and requires little post editing. The sound quality via the slide recorder is not great so I post-process each slide audio in Audition. I used to do the audios in Audition the way you mention and then import them to each slide but that was too slow.
Now I export all the audios in one go, then click one key to run a batch job on them in Audition to improve the audio and then in one operation automatically re-attach them to the original slides. It's very streamlined apart from the extra key clicks that spoil it (and are the subject of my original post here). They prevent it becoming super-fast.

I have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd

i have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd

steve359 wrote:
Sorry ... I read but was unfortunately distracted from your original post. You have a system that came with Lion. The Lion that is on your system is only for your computer and cannot be downloaded from the app store again because you never purchased it officially through the App Store.
Try this for making an external USB/DVD copy of Recovery on an external disk. internet is still required for reinstall, though, I believe: http://support.apple.com/kb/HT4848. But at least you have a separate Recovery Partition if you ever need a fully new and empty internal disk.
Your assumption is incorrect. Although he may not be able to download it from the App store he can download it directly for the Apple servers using the recovery partition on his original drive.
All you have to do is start the install routine and then point the install to an external hard drive. Once the download is finished the computer will reboot to start the install. At that reboot disconnect the external drive so the install can not start. Boot the computer back into the OS on the internal hard drive, which is what will happen automatically once the external drive is disconnected. Then connect the external and copy the files from it that were downloaded. Right click on that downloaded package file and select Show contents. In the contents of that package is a file called InstallESD.DMG. Copy that file out of the package and burn it down to a DVD or USB thumb drive and you now have the Full Lion Installer. I have several of them laying around on different hard drives and 2 USB thumb drives which I have used to reinstall Lion on my 15" MBP.
Sorry OP I should of just typed this out in my first post.

I have one doubts, Why does the screen go out automatically in way rest and activate when pressing any does key?

I am a little scared, since for one week I received to the new Macbook Pro 13 i7, and does few days was working of strange way, since it was beginning to extinguish automatically the screen at any time and any key activates when pressing to enter the open session. I want to know if something is being put rare or is normal, or if desbalanceé the adjustment of economizer or screen or whatever it appears in the panel of system preferences. I have reestablished them almost all, but the problem persists.
I need aid. I do not want that it passes nothing to him and that everything is working well.
I will be thankful for its answers to them. Especially to the technical support

I belive that upgrade to 10.8.4 has troubles.
After this my macbook pro started to go to sleep even that I was working with it.
This morning it became too much. I had worked fine in the evening and this morning the keyboard would not response. Each keypress made sound an evel "click sound".
I ended up needing to reboot the computer.

Mac App Store does nothing when I click download on any App

MacBook Pro (13-inch, Mid 2009), OS X: Snow Leopard 10.6.8
Hello,
my problem is that when I am in the Mac App Store and click download on any App or on the new OS X Yosemite (which is why I am opening this thread) nothing happens.
The font turns grey indicating that I clicked the button, but after that... nothing. I don't even get an error message telling me what's wrong.
And when I go to another Tab in the Store like from "Updates" to "Highlights" and then back to Updates it shows the button as if I didn't click it in the first place.
Images (english is not my main language):
What I did is search for hours what could be wrong. What I tried was:
- Log Out and start the application again, then log back in
- Try downloading with another Apple-ID
- Start the MacBook in Safe-Mode
- Several restarts of the MB itself
- Repair the rights to the volume (this one is tricky for me to explain: something like the HardDrive Managing Program)
Those are the things I can remember.
Other information that might be useful:
- I have a stable WiFi Connection and no VPN or similar in use
- Except from Google Chrome I didn't install anything as I got the MB a few days ago where it was as if it was used the first time
I hope you can help me as I am really desperate getting this to work.

I am running OX YS X YOSEMITE 10.10.3 with a macbook pro 13" and have this same problem: App store shows there are apps to update. I click update (either just one or all), and they mac shows the update button greyed out, as if i had pressed "UPDATE". For hours on end, nothing happens. NOTHING! I've restarted the mac, which is about as much as i know. Please help me solve this issue, as i'm using Pages and numbers apps and feel like they are stuck in apple limbo/**** without the new update. Hoping to get this resolved soon.

I have an ipod touch 32gb. Model: MC008BT Version: 5.1.1. 3rd ed.   Recently when clicking play on any song the ipod will shuffle through as many songs as there are in the album or playlist until it reaches the end without playing any songs. It also does

I have an ipod touch 32gb. Model: MC008BT Version: 5.1.1. 3rd ed.
Recently when clicking play on any song the ipod will shuffle through as many songs as there are in the album or playlist until it reaches the end without playing any songs. It also does not go through each song. For example:
a 62 song playlist. I start on song 16. Immediatly the song will shuffle: 16-26-54-62 and then back to the main screen. Also when the songs are shuffling the play button in the top right corner is on.
Music will play if i start from track one with shuffle turned off and repeat turned on. But then i am limited each time to 1-5 songs.
Ipod has been in excellent working order since this has happened.
any suggestions on how to fix?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

When I click on almost any picture, in any album, to enlarge it, the pic starts to enlarge and then all I get is a black screen with a large exclamation point in the center. What have I done to my iPhoto program, and how do I fix it?

Recently, whenever I click on almost any of my pictures, in any album, in order to enlarge that photo, it starts to enlarge but then,
very quickly I get a black screen with a large white exclamation mark in the middle. And no full sized photo. Boo!
What did I do to my iPhoto program, and how can I fix it?
Thanks for any suggestions.
Mike H.

I'm sorry. Too old to understand this stuff. I'm sure this seems real stupid to you. But I have no idea how one
would "right click on the Original iPhoto Library" (I know, I know, 'as stated").
Do I right click on the symbol in the dock?? Or open it first and then, . . I can't find a way to right click on the word iPhoto in the top bar.
Or should I open the program you had me download. There I can find something called "original iPhoto library".
When I "right click" on that I get some options. None of them are "original folders". There's "reveal library in finder", and "dupilicate library and "sort libraries". I have no idea if any of these are what you want, or if any of these might change something.
When I clicked on "reveal library in finder" earlier on it showed me the copy of the photo library that I made a while ago, sitting right where I know it is on my desktop. And if I click on that symbol it shows me all the pictures again. Just like in my regular iPhoto files - all the thumbs are there, but most can't be opened to full sized.
Are we making progress here? I'm sure this is frustrating to you. This is just pictures of family. Even the thumbs are nice to look at. But this is nothing critical - like work related or anything.
Thanks.
Mike
t

My iPad 1 does not make any of the sounds (key clicking, etc) I have directed it to despite having volume turned all the way up...any thoughts?

my iPad 1 does not make any of the sounds (key clicking, etc) I have directed it to despite having volume turned all the way up...any thoughts?

Check to see if the "silent" switch is turned on. This is either the hardware switch next to the volume control or a software switch on the "recent apps" tray depending on how you have your iPad configured (Settings > General).
Too see the software switch on the "recent apps" tray double-click the Home button and swipe the tray to the right.

When songs are playing in itunes the sound keeps pausing and making little clicking noises. Any ideas?

When songs are playing in itunes the sound keeps pausing for brief moments and making little clicking noises. Any ideas how to fix this?

Error -36 is an I/O error, which could indicate a damaged Catalog file, corrupted bitmap or (even worse) a dying HD.
I would recommend to run Disk Utility and perform a 'Verify disk'.
If lots of errors are found, try to save as much files as possible to another disk.
Then perform a 'Repair disk'. Repairing a catalog file or bitmap might cause loss of files, that's why I recommend to verify first and save the files, before repairing.
M

HT6065 I have OS X 10.7.5 and am trying to download mavericks v 10.9.1 but nothing happens. I log in and download shows but nothing happens when I click it. Any help? Ta

I have OS X 10.7.5 and am trying to download mavericks v 10.9.1 but nothing happens. I log in and download shows but nothing happens when I click it. Any help? Ta

Its a 5.3 GB file. It might takle a while to download.
When done, it may open automatically, but the file will be in your apps folder
Grant

N95-1 turns off when press any key

I was using normally the phone when suddenly it turned off, I thought was the battery but it's go, I tried other battery with the same result. I turn on the phone, and when I press any key it turns off. If the keyboard keeps locked the displays says yeah unlock the keys, but when i unlocked and press any button it's turns off, I made the hard reset trick, but this couldn't solve the problem, help me please

I have the exact same problem with my Nokia Luna 8600, turns on normally, but as soon as I press any key, it turns off and changing battery nor formatting didnt help.
Any ideas?

Mouse clicks when hands on handrests

so i dont know if this is normal or what, but if my hands are on the handrests (not touching the trackpad) then the mouse gets clicked.... its fine if my hands are barely touching it but any pressure at all and the mouse clicks... very annoying when trying to type and suddenly you are back a page or in a different window
is this normal?

Nope, that is not normal. I would kinda look at your hands though and make sure that say your palm, or your thumb is not unnoticably taping the trackpad. I notice that when I type that my right hand especially that of my right hand the outside of my thumb hangs over the trackpad quite a bit and has caused some problems for me when im not paying attention and have rested it on the trackpad accidently then tried to move the mouse and nothing happens. You may actually be taping it JUST enough and not noticing it. Other wise I would take it in and have it checked out.
E

T440 F1 key clicking

I just opened my laptop today, and when I used F1 to unmute, it 'clicked' a sort of odd, plasticky click. I hit it again a few times, and it always clicked. So I took the key off to check. I didn't see anything wrong, no broken plastic. After taking it off and putting it back on a few times, it now only clicks when I apply pressure in the top left area of the key.
Does anyone know what might be wrong? Should I try to fix it, or see if I can get the key/keyboard replaced? (the laptop is still under guarantee)
/* no comment. */
Solved!
Go to Solution.

Hi MadTux,
Thank you for the reply!
Sure, check for a while and if the issue re-occur then visit the nearby service centre and get it checked. Please feel free to post in Lenovo Community Forums if you have any further queries!
Did someone help you today? Press the star on the left to thank them with a Kudo!
Cheers!
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to view the key mapping when viewing Hierarchy in Data Manager

Hi! I previously posted a question on doing value mapping using the hierarchy code rather than the name. I have got that working now using concept of remote key. When I first loaded the hierarchy with remote key and check in Data Manager, I can see the hierarchy structure with the key mappings. However, when I subsequently went back to the hierarchy to have a second look, the keys are gone. Does anyone know how I can view hierarchy in Data Manager with the key mappings?
Cheers!
SF

Hi,
Go to Record mode, and open Hierarchy table. Now to select click on any hierarchy node record and then right click and select "Edit Key Mappings". This will show you existing keys as well as allow you to manually modify keys. You can only Check Remote keys on hierarchy in Record mode and in Hierarchy Mode "Edit Key Mappings" option will be disabled.
Please revert if you face any issue.
Regards,
Shiv

Finder crash when opening any Folder

I am a very experienced mac user and this one has me stumped. Im posting here to see if anyone else has this problem.
Finder crashes when opening a folder on the desktop
Finder crashes when using any option from the Go menu (or key combo) except Airdrop.
Once Finder window is open on Airdrop any navigation to home folder or any other folder using side bar causes Finder to crash.
Using Go To Folder causes crash, even on hidden folder like /var
Finder is OK when opening files on desktop
All other apps can browse file system and open/save OK
Google Drive is not present on system (this used to be an issue a long time a go that caused similar symptoms in other threads)
Drop Box is installed. But issue occurs even when dropbox is not running
Using spotlight to open applications still works normally.
Clicking the Finder icon in the Dock results in a non-functional blank window entitled "Window", all tool buttons are disabled.
Repeatedly opening the same folder over and over results in the message "The last time you open Finder, it unexpectedly quite while reopening windows. Do you want to try to reopen its windows again? If you choose not to reopen windows, you may have to open and position the windows yourself" Two options "Don't Reopen" and "Reopen". Both buttons have no effect except to dismiss the dialog.
Steps Taken to fix:
Booted into recovery mode and performed repair disk and Permissions - Finder Still Crashes
Removed finder preference files using terminal
~/Library/Preferences/com.apple.finder.plist
~/Library/Preferences/com.apple.sidebarlists.plist
Recent changes to system:
iTunes 11.4 Installed with normal Software Update.
Possible Cause of Problem
Found app in iTunes that has File Sharing enabled and has a shared folder. Curious as to what was in the folder i dragged it to my desktop and double clicked. Im not sure if iTunes would have had enough time to copy the contents of the folder before i tried to open the folder. Finder crashed. This was the first time it happened.
iPhone app in iTunes that I picked in was "Ubersense".

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ +N.+ =//p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My "W" Key "Clicks" when barely any pressure is applied

Similar Messages

Maybe you are looking for