My W500 can not install Rescue and Recovery

Hi guys,
Has anyone encountered the same problem as I did when I tried to install Rescue and Recovery?
The process always stopped with error code 6.
I am using Win7 X64.
W500 T9900 8GB + TBs imageries

I was also having the exact same problem on my W500, but I did not have to download the full multilingual package to get it to work.  First I reinstalled windows, and used the "clean all" command before the install. 
At the first setup screen during the Windows 7 install hold Shift+F10 - this will bring up the command prompt.  Type in "diskpart" then type "list disk"  then type "select disk 0" This number may be different depending on how many drives your machine has in.  It will then tell you "disk 0 is now the selected disk"  After this type "clean all".  You will see just a flashing cursor in the command window to tell you it is running.  This will take some time, and   WARNING:it will fully erase -write zeroes- to the entire drive.  Your data will be unrecoverable, and ALL PARTITIONS will be deleted.  Once it's finised it will give you a message saying Diskpart succeded in cleaing the disk.  Now the important part, type in "select disk 0" once again, then type "create partition primary"  This will prevent Windows from automaticaly created the 100MB partition on the drive durring the install.  After that type 'exit' and 'exit' again, and you can continue the setup as normal. 
Once Windows is up you need to install Microsoft Visual C++ 2008  from here: http://www.microsoft.com/downloads/en/details.aspx​?FamilyID=ba9257ca-337f-4b40-8c14-157cfdffee4e&dis​...
Once that is installed, restart and it should let you install Rescue and Recovery.
This worked perfectly for me, even though it is a little more complicated.

Similar Messages

  • T61 upgraded to Windows 7, now can't install Rescue and Recovery or Bios update.

    I have a T61 6459 CTO that had XP SP3 on it. I upgraded to WIndows 7. I tried to install TVTVRNR450_025en, but I get an error msg "Rescue and Recovery does not support installing from the Operating System which upgrade from a legacy pre-load system." I tried deleting all old RNR and CSS programs in the old files after the install, but nothing seems to work. There is nothing listed in my add/remove programs. My Thinkvantage button doesn't work. How do I remove the old RNR? Should I have done that prior to installing Windows 7? Do I need to re-install my XP backup and start over? My Bios update extracts, but doesn't install. Help!

    Hi, FSURN82
    I did some research and was able to find this thread from Lenovo Forums. There are a few other people having similar issues. For some, installing an older version of Rescue and Recovery (sometimes even the one for their OS before the upgrade) would work fine. For some, however, they could not get it to work, so they would create backups manually using Windows.
    As for the BIOS issue, what version are you currently running and to what version are you trying to upgrade?
    Thanks,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Can't install Rescue and Recovery on T410

    Hi, I recently bought a reconditioned Lenovo T410 and have pretty limited technical knowledge, so I took the helpful advice of another member on the forum to perform certain actions to get myself set up. One of these was to create factory recovery discs using Rescue and Recovery. As this wasn't already installed on the machine, I have downloaded it (tvtvrnr4.52_005en.exe) but it won't install. I am getting the message 'Error 25014 There was an error installing the Rescue and Recovery boot manager. Return code: 6'. Any ideas about how to resolve it or an alternative way or creating recovery discs?
    Solved!
    Go to Solution.

    The only chance to perform factory recovery is if you have Lenovo_Recovery partition with several .wim files on that. But it seems they are absent. So contact with Lenovo support in your country and purchase recovery disks.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Problem in audio driver and unable to install rescue and recovery ver 4.3 -

    Dear community collegues,
    I have installed original windows7 home premium in my lenovo N100 series 0768-54A model y'day. Though every thing went well, the AC97 audio driver could not be installed. Can any one provide me a solution to make the audio working in Windows7 Home Premium.
    Similarly after new installation, I could not install rescue and recovery version 4.3 (windows7 compatible) in to the system, every attempt failed. Could any one provide a solution.
    thanking You.
    Sakthivelu V M Chennai

    I am not sure which audio chipset your N100 has, so
    Try this for sound:
    Go to THIS web page.
    Download Soundmax audio driver for Vista.
    Extract the files by double clicking, and note where they
    are being extracted to.
    Uninstall any sound driver you have installed, reboot.
    If windows says New Hardware Found, click cancel.
    Go to folder where downloaded drivers were extracted,
    and run Setup.
    If Soudmax drivers do not work, uninstall and repeat
    with the Realtek audio drivers.
    I do not think Rescue/Recovery will work except for
    the originally installed OS.

  • How to install Rescue and Recovery 4.21 on Windows 2003

    There should be a good amount of users running Windows 2003 on their thinkpad for various reasons. As much as I tried, I could not get Rescue and Recovery's MSI to install on my X61 running Win2003 R2 SP2, despite attempts to modify the Setup.ini file.
    the changes made in setup.ini:
    [Win2003Server]
    MajorVer=5
    MinorVer=2
    MinorVerMax=3
    BuildNo=3790
    PlatformId=2
    The returned installer error is "The current operating system is not supported for running Rescue and Recovery. Supported operating systems includes Microsoft Windows 2000 with Service Pack 3 or Windows XP with Service Pack 1 or later".
    This is such a shame as I'm pretty sure RR would run just fine on win2003 as both WinXP and win2003 are based on the same underlying technologies and code. Please advice if there's any method such as a command switch for MSI installer to suppress OS detection error or any modification that can be made to setup.ini to get it to install on win2003 or any utility that can be used to modify MSI files and database? Thanks!
    Message Edited by Xseriesfanboy on 08-31-2008 08:26 PM
    Message Edited by Xseriesfanboy on 08-31-2008 08:30 PM
    Solved!
    Go to Solution.

    Alrighty..I've manage to google a hack to this problem of getting Rescue and Recovery to install on Windows 2003. So let this post be a guide to how to get this done:
    Getting the tools to modify Rescue and Recovery MSI (Windows Installer)
    Download and install Orca MSI editor from http://astebner.sts.winisp.net/Tools/Orca.zip
    Review http://ravi1337.blogspot.com/2007/05/orca-msi-editor-make-any-software.html, this guide should give you a good idea what you'll be doing with this tool.
    Download Rescue and Recovery™ 4.21 from Lenovo
     Download Rescue and Recovery™ 4.21 for Windows XP (32-bit) or Windows 2000  from http://www-307.ibm.com/pc/support/site.wss/license.do?filename=thinkvantage_en/z652_setup_rnr42_016c...
    Ensure you are downloading full install with all language pack to avoid any missing installation file due to regional settings
    Run the installer and see that all files are extracted accordingly.
    Modification of Rescue and Recovery Installer
    Delete all files in C:\Documents and Settings\(User Account Name)\Local Settings\Temp\ this will prevent confusion on which files are unpacked and created by RR installer
    Extract z652_setup_rnr42_016c.exe into a folder named z652_setup_rnr42_016c.
    Execute tvtrnr42.exe
    The MSI installer is then unpacked to the following default directory: C:\Documents and Settings\(User Account Name)\Local Settings\Temp\. Note that the installer creates two directories for installation of RR, that are {F151F2B3-0C32-44D3-90E2-E639B8024622} and _isXXXX <--- 4 randomly generated digits
    The folder _isXXXX contain Rescue and Recovery.msi
    On the first run of the installer, the following error will be shown "The current operating system is not supported for running Rescue and Recovery. Supported operating systems includes Microsoft Windows 2000 with Service Pack 3 or Windows XP with Service Pack 1 or later". DO NOT CLICK OK! This is cause the installer to purge all installation files and related directories in the temp directory. Just leave the error window as it is without clicking the OK button!
    Copy all TVT files from folder z652_setup_rnr42_016c into both directories
    Modify setup.ini entry for Win2003Server with notepad and save changes:
    [Win2003Server]
    MajorVer=5
    MinorVer=2
    MinorVerMax=3
    BuildNo=3790
    PlatformId=2
    Right-click on Rescue and Recovery.msi and edit with Orca
    Go to LaunchCondition Table
    Drop the following rows and save changes:
    (((VersionNT=501 AND ServicePackLevel>=1)OR (VersionNT=500 AND ServicePackLevel>=3)) AND WINSERVER=0) OR Installed- The current operating system is not supported for running [ProductName].  Supported operating systems include Microsoft(R) Windows(R) 2000 with Service Pack 3 or later and Windows XP with Service Pack 1 or later.
    IEEXISTS=1 OR Installed - [ProductName] requires Microsoft(R) Internet Explorer version 5.5 or higher. You cannot install the Rescue and Recovery program without this version of Internet Explorer.
    INCOMPAPPNAME=0 OR Installed - [INCOMPAPPNAME] is installed and is incompatible with this version of [ProductName].  This application cannot be installed.  To install [ProductName], uninstall [INCOMPAPPNAME] and then restart this setup.
    Not SGEWRONGVERSION OR Installed - [INCOMPAPPNAME] is installed and is incompatible with this version of [ProductName].  This application cannot be installed.  To install [ProductName], uninstall [INCOMPAPPNAME] and then restart this setup.
    When you're done with these modification, re-run Rescue and Recovery.msi without closing the previous error window. Rescue and Recovery should now install without any glitch! Good Luck!
    Message Edited by Xseriesfanboy on 09-01-2008 06:37 AM
    Message Edited by Xseriesfanboy on 09-01-2008 06:38 AM

  • Error installing rescue and recovery 4.3 on windows 7

    i have a sl410 with windows 7 ultimate(32bit) installed, but i failed to install  rescue and recovery 4.3 for many times,reporting"Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6".
    why?
    i found someone said about using a command line installation which will NOT install the RnR partition,but how to use  command line installation?i've got only the tvtvrnr43_1027sc.exe downloaded file and the tvtrnr43_1027.exe in C:\SWTOOLS\apps\rnr43sc\ directory,how can i input the comands like setup.exe /a /s?which command should i use?

    http://forum.lenovo.com/t5/ThinkVantage-Technologies/Rescue-and-Recovery-4-3-for-Windows-7-installat...

  • Error when installing Rescue and Recovery

    Hello, 
    I own a 2 year old Thinkpad L430 running Win7 Pro 64bit.
    I've been trying to install Rescue and Recovery because I want to reset my PC from the recovery partition, and as far as I understand the only way to do that is through RnR(?)
    But whenever I go through the installer i get this error message:
    click me
    which, in english, basically says that there was and error with the return code 6.
    After googling around for a while i found out that the fact that I once had a Linux Distrinution installed alongside Windows may be the cause of aforementioned error, because Linux replaces the default Lenovo boot loader with it's own GRUB one. When i removed the Linux distribution I typed the following into the command line: bootrec.exe /fixmbr to return to the Windows boot loader.
    Do anyone know if the Linux thing is in fact the cause of  the error?
    Can I somehow restore the Lenovo boot loader or is there's some other way to install RnR and/or restore my PC?
    Any help is truly appreciated!
    thanks, 
    Simon

    A typical factory ship of machine from Lenovo: (yours may not look like this).
    Q (lenovo recovery)
    contains Rescue and recovery standalone software.  This standalone software also  can call The factory recovery software, if the Factory software is still on the Q drive.   Lenovo modifies the BIOS to support launch of standalone RNR.
    Regardless of RNR installed or not, on the windows platform, standalone SHOULD launch. There is always a standalone RNR  in the recovery partition. 
    ==
    workaround:
    (1) order REcovery DVD from the support center. $50 us if not under warranty
    (2) find a bud with a Lenovo machine. Create Rescue media to a DVD.  Boot your machine with the DVD. If it finds the recovery partition intact, you can do a Factory reinstall. Rescue media is a standalone RNR, it will not rely on the boot structure on your C drive HDD>
    (3) Your main issue is RNR install died with RC=6. This shows up. Check the msi logs in
    C/users/YOURID/appdata/local/temp. I have researched some of these.  It is confusion in the installer/ and the condition of the PDA/predesktop area (corrupted) . PDA is standalone rnr. Your PDA is probably just fine.
    SO, which version of RNR did you try to install? Was it the USA english version or the NLS support version.
    Your cant mix and match.
    You cant switch from the English only version to NLS. denmark version, it will rc=6. I personally think this is a bug..
    Region lang, local lang etc also confuse RNR installer.
    The rc=6 occurs way after the installer had a bug in it. Yes it is trying to modify the MBR/BCD. I dont think your linux stuff mucked it up.  
    ==
    Simple solution:
    Get a DVD of standalone RNR to perform the factory recovery. 
    -or- hit pff11 at boot time, and use RNR standalone for Factory recover<<< this shoud work. << my choice.

  • Windows 7 Upgrade: Cannot install Rescue and Recovery 4.3

    I recently upgraded my T500 from Vista to Windows 7.
    I have downloaded the following Lenovo software: Lenovo Thinkvantage Software Toolbox and Lenovo System Update 4.
    I would also like to install Rescue and Recovery 4.3.  I downloaded the program from Lenovo's site, but I cannot get it to install properly.  I keep getting an error indicating that Microsoft Visual C++ 2005 Redistributable Package (x64) SP1 must be installed.  I downloaded this from Microsoft's site and installed it, but I keep getting the same error.
    And help???

    Hi guys I have the same problem, however after installing the 2005 version of the package from the link provided by lenovo here (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4Q2QAK&AID=10429688&PID=3719336&...
    I went to the control panel and checked what version of this package is installed. The case was that there were 3 versions of Visual C++ 2005 redistributable already installed.  This is a fresh installation of Win7 - 64bit
    I removed all of them and reinstalled the one suggested by lenovo.
    The problem still continues.
    I also noticed the following article from about the same time the package was released in 2006 http://support.microsoft.com/kb/920854
    Could it be that the RnR tool can not detect the redistributable package?
    So far I have no idea how to solve this. Any help is appreciated.

  • Unable to install Rescue and Recovery 4.50

    Hi all,
    I bought x220 tablet here in Germany, so I received windows 7 professional in German language. 
    I wanted to use English version of windows so I installed English version of windows hence lost all lenovo default settings. Now I am trying to install rescue and recovery 4.50 and it is not working with the msg " make sure that .tvt data is in correct installation pack folder" I translated this msg from German to Englich
    Before installing Rescue and Recovery 4.50 I also installed  
    Microsoft Visual c++ 2005 SP1 Redisributable Package (x64)    and
    Sysprepbackup Acessory Package  which was mentioned in Lenovo support. 
    If someone has already solved such problem, I would be glad to know the answer. 
    Thanks and regards,
    Bhargav Potdar

    It seems like R&R is missing the necessary language file(s), so I recommend downloading and installing the package that includes support for all languages:  http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/z936_setup_rnr450_025c.exe
    Even on English version of Windows, if you are using German language support like you are, R&R will need the German language installation files.

  • Difficulty installing Rescue and Recovery 4.2 patch for Windows Vista

    Which between System Update Installation History and Post-Installation Status Report should I believe, when they tell a different story?
    When I run thinkVantage System Update, the post-intallation status report indicates that the following fails to install:
    * Rescue and Recovery 4.2 patch for Windows Vista
    * ThinkVantage Client Security Solution for Vista SP1
    * Lenovo Wireless WAN Activation Patch
    However, when I open the ThinkVantage System Update History Log, I read that the above updates have been installed.
    Which one should I believe?
    I'm willing to believe that the update has been installed, but whenever I run System Update, I keep getting the same message that the above three need to be installed.
    Should I keep ignoring the message? If not, what else could I try?
    I have a T60 running Vista with SP1 installed. 

    Hi privard,
    Thanks for your feedback. Anyhow, let me see how i could help to sort this out for you.
    Cleo 
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Need Help Installing Rescue and Recovery 4.3 Windows 7

    Hi there,
    So I'm having a strange issue installing Rescue and Recovery 4.3 on my TP T61.  I keep getting an error message stating: "It is required to install the Microsoft Visual C++ 2005 Redistributable (x64) Service Pack 1 before you install the Rescue and Recovery program."
    I have already installed C++ SP1.  I've also tried installing/uninstalling it as well.  Still no luck!
    Here is a link to the installer:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73612
    And here is a link to the C++ SP1 file:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=200b2fd9-ae1a-4a14-984d-389c36f85647&displa...
    Any Ideas?
    Thanks,
    Peednus
    T61
    T7100 @ 1.8 GHz Duo
    2GB RAM
    Windows 7 Home Premium (x64) (Clean Install)
    T420s, i5-2520M @2.5, nVidia 4200m, 8GB DDR3, OCZ Vertex 3 Max IOPS 240GB SSD, Hitachi 320GB @7200rpm ulrabay, 8Pro x64
    T61, Centrino Duo @1.8, GM965, 4GB PC2-5300 DDR2 @667MHz, OCZ Agility 120GB SSD, 7Pro x64

    Hi peednus,
    The C++ 2005 SP1 installer you are trying to use is for x86 (32 bit).  The error message you quote says it needs the x64 (64 bit) version.  Try
    Microsoft Visual C++ 2005 SP1 Redistributable Package (x64)
    If you're really running a 64 bit Windows install, that should/might get you going.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I can not install Waik and mdt on server 2012 so that i can deploy windows 7 please may you help me?

    i can not install  Waik  and mdt on server 2012 so that i can deploy windows 7 on target machine, i have downloaded mdt  Waik i got error saying you must install frame 2.0  which needs also adk windows 8. i am using hyper  machine.
    thank you

    Hi Warsame12,
    It is worth mentioning that don’t use IPV6 PXE, Windows 7 doesn’t support WDS 2012 deployment over IPv6 PXE. If IPv6 PXE boot is enabled and a 
    Windows 7 installation is selected, a blank screen will appear and Setup will not run.
    The related KB:
    Windows 7 client deployment over IPv6 PXE network boot does not work.
    http://support.microsoft.com/kb/2803741
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Can't get Rescue and Recovery to Start

    Hey all,
    My computer is having hardware problems. I'm at the point of giving up completely on the computer, but I had a few files that I wanted to recover from it first. I've had Hard Drive issues before and usually just have to push the blue Thinkvantage button and rescue and recovery comes up.
    However, this time I can't get it to start. I just go to a screen that says "Startup Interrupt Menu" and lists three options, resume normal startup, enter BIOS, and choose a temporary startup device. I can't even get to rescue and recovery if I press F11.
    Any ideas? 
    I'm running Windows 7, the computer is a T61 that's a little over 3 years old. 

    I'm having the same problem as crimesofparis.  My machine is just out of warranty.  It came with XP Pro when I first received it.  A while back, I received a copy of Win 7 32-bit from Lenovo.  I installed it and everything has been fine.  I recently purchased a new Thinkpad Edge and want to sell my T61.  The new owner would like the XP  back on it. I thought I would just run the R&R by pushing the blue Thinkvantage button, but when I do  I'm getting the same thing, 
    "Startup Interrupt Menu" and lists three options, resume normal startup, enter BIOS, and choose a temporary startup device. I can't even get to rescue and recovery if I press F11.  Apparently something changed when the W7 was installed, but Lenovo did not make me aware that the restore using Thinkvantage would stop working.  There must another way to get to the restore partition (which appears to be intact) and restore from it.  I also can not find my restore disks.
    Lenovo, can you help?
    Thanks

  • Installing Rescue and recovery 4.5 on my t430s

    Hello, there,
    my t430s has win7-32bit installed. 
    Now I'd like to make my own recovery DVD, I downloaded the rescue & recovery 4.5 and tried to install it on my laptop, while error occured during the installation process, it prompts me to check in the installation fold if the right tvt file is there. 
    I tried both english/german version but in vain. the same error happend each time.
    Under the extraction folder, I found the following files:
    Z936ZAB1025GR00.tvt, rnr_grlic, tvtrnr, tvtrnr_1025, Z936ZAB1025US00.tvt.
    looks ok but I don't know why it's not working.
    btw, the bios was just updated.
    Anyone could help me out?
    Thanks in advance.
    bests,
    jeff

    Hi Bob,
    which version of client security do you have?
    From Lenovo site: "Rescue and Recovery 4.1 is only compatible with Client Security Solution 8.0 or later."
    or
    have you tried uninstalling 4.0 and then 4.1 new?
    Regards
    Andy
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Cano install Rescue and Recovery V4.2 rnr42

    Trying to install V4.2 code ( full download of 448MB ) was unsuccessful - msg received :
    " This version of the Rescue and Recovery program can only be installed on select Lenovo computers. This set up can not continue". Tried System Update method with the same results.
    Tried speaking to Lenovo support w/o success ( as yet -- it is Saturday after all ).
    Anyone seen this message before ? I am using an in warranty Lenovo Thinkcentre 8291-E2U ( E50 ).
    p.s. same result trying to install Client Security Solution V8 which Lenovo claimed was a pre-req. ....Steve

    A possible cause may be that your system's Vital Product Data is not setup correctly. The applications you mention read your system's Vital Product Data to ensure that you are using a Lenovo computer before they will allow installation.
    Is it possible that you've had the system board replaced? The Vital Product Data is often left incomplete after system board replacements.
    You should be able to reset your Vital Product Data using the Flash BIOS update for your system. You will need to re-enter your system's machine type, model, and serial number.
    Message Edited by Myles_Lenovo on 03-03-2008 10:25 AM

Maybe you are looking for

  • Importing P2 .mxf files with audio into AE CS4

    I hope this isn't the ultimate newbie question but, I have been working with After Effects for a few months but haven't need audio until now. Is there a different process for importing/exporting with audio? I have brought in the P2 video file but I d

  • Compatability issues with Windows 7 and Ipod Classic initially set-up w/ XP

    When I opened my iTunes account for my iPod Classic 2 years ago, I was using Windows XP and could download from iTunes Store or load my own CDs and then sync to my iPod.  Long story short: That computer crashed. I now use Windows 7 on both my new com

  • Email replies from iPhone not shown as replied in Mail with Mavericks.

    I'm on a Mac Pro, MBP, and iPhone 5.  All using current versions of Mavericks and iOS 7.  If I send an emil form my iPhone, it shows up in my sent Mail on my computers, but If I reply to an email, I don't get the 'Replied" icon next to the message in

  • A question About SUBMIT statement

    Hi, By SUBMIT statement, i can trigger another report. If the called report runs into dump, how can i detech/catch the dump in the calling report? I tested. It seems impossible to catch the dump. The calling report will also dump. My question is, if

  • What is the best replacement for iWeb?

    I have been using iWeb for a very long time. I need to move on to something that is being updated. What is the best replacement for iWeb? I see Wordpress needs special software to work on a Mac. Thanks! Pat