My Wallpapers and Ringtones... And MORE storage SPACE!!!
I am a recording artist... How do I upload a personal pic from my computer(MAC) as a wallpaper, and a few personal songs for ringtones... And also, how can I get MORE storage space to add more apps on this phone?
Greetings, and welcome to the forums!
Are you only using the device memory for all of your file storage? If so, purchase a micro SD card to store your pics, ringtones, songs etc. on. Then set your phone to mass storage mode so that your MAC will see it as an external hard drive and then you can transfer your pics/songs to the mem card.
As for apps, those you'll need to store in device memory, as that's the only place they can be run from.
"Cats may taste like chicken, but they have more bones than rabbits."
Blackberry 101
Tips & Tricks
Videos to learn from on youtube
Similar Messages
-
I have been tying to buy more storage space and for no reason I can't get it
I have been tying to buy more storage space and for no reason I can't get it
I hae been trying going through all the steps to do so, but at the end, I can't get the purchase.
-
I can not back up my iPhone. It says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I should know, but I don't. If I upload all of my photos to iCloud and then delete them off of my iPhone (for more storage space), will they all remain in iCloud or am I missing the point of iCloud?
Right now, there is no way to upload and access photos in iCloud. You need to import them to a computer if you want to be able to retrieve them later:
PHOTO IMPORT IOS TO MAC/PC
Cheers,
GB -
Hi, I have an early 2008 24" iMac, I need more storage space and was wondering if I could fit a 3TB Western Digital Caviar Green HDD into it with out any problems? This is the one I've seen, Western Digital Caviar 3TB SATA 6 GB/s 64MB Cache 3.5 inch
My bad?
You're original response was questions/post about an iMac. Now you've edited it to ask about a Mac Pro?
You can more easily add internal drives in a Mac Pro.
Not too terribly easy to add/replace drives in an iMac.
If younhave questions about a Mac Pro, try posting in the Mac Pro forums.
Much more knowledgeable users there. -
I need to open up some more "storage" space on my laptop... My Audio books are taking up a lot, so I'd like to take them off my laptop by still have them for another listen. How do I do this?
Move the entire iTunes library to an external drive, launch iTunes with the Option key held down, choose that library, and back it up to a second external drive.
(125607) -
I am trying to update my phone, but it tells me that I don't have enough storage. I have deleted almost all of my apps and purchased 15GB more storage, but it still tells me that I don't have enough storage?
Connect to iTune and "Check for Update" (tap to enalrge image)
-
I have an abundant amount of images on my iPad and iMac and running out of storage space. Where or what device can store these images for the least amount of money?
I would suggest
http://www.lacie.com/fr/wheretobuy/index.htm
LaCie Rugged Mini -
Short dump - No more storage space available for extending an internal tabl
Hi All,
I have requirement in which my program generates a text file on my presentation server. Here my problem is, this requirement can not be executed in back ground, it should be done in foreground only. When I execute in foreground, if the data records comes to some 38 lacks then I am getting a short dump saying 'No more storage space available for extending an internal table'.
And in dump analysis under WHAT HAPPENED section it is giving as
' What happened? |
| You attempted to extend an internal table, but the required space was |
| not available.
Please suggest me, what I have to do in this case?
Thanks in advance.
Thanks,
Sudha MettuHi SuDash,
Allocation of the memory spaces will be done by BASIS people.
you can contact them..
Regards! -
Error-No more storage space available for extending an internal table.
Hi Experts,
i am facing problem in a program . its showing runtime error.
Short text
No more storage space available for extending an internal table.
its showing error at
IF sy-subrc NE 0.
REFRESH p_wip_tab.
ELSE.
i_wip_tab-pspnr = i_internal_and_external-pspnr_prps.
LOOP AT p_wip_tab.
MOVE-CORRESPONDING p_wip_tab TO i_wip_tab.
==> APPEND i_wip_tab.
ENDLOOP.
ENDIF.
DATA: l_billable_tab LIKE p_billable_tab OCCURS 0 WITH HEADER LINE,
p_wip_tab LIKE zpswip OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF i_wip_tab OCCURS 0,
pspnr LIKE prps-pspnr.
INCLUDE STRUCTURE zpswip.
DATA: pernr_name LIKE pa0002-vorna,
END OF i_wip_tab.
How i can resolve this problem if anybody knows it then please reply me as soon as possible.
ThanksHello.
Probably you fill the internal table with too much data and it cannot hold that much.
You can either redesign the program so that it processes the data in batches of, say 100000 records, or contact your BASIS team and ask for their help. They could possible assign more memory to the running applications.
Reward if helpful.
Regards,
George -
Hi
Im SAP-BW Consultant. I need some code in the transfer rules. But while im loading data , im getting "No more storage space available for extending an internal table.
Pls check my code and modify it so that i can load the data of 5,000,00 records
TYPES: BEGIN OF tys_TG_1,
/BIC/ZIUTILICH TYPE /BIC/OIZIUTILICH,
/BIC/ZIRGRCH TYPE /BIC/OIZIRGRCH,
/BIC/ZPRODUCT TYPE /BIC/OIZPRODUCT,
END OF tys_TG_1.
TYPES: tyt_TG_1 TYPE STANDARD TABLE OF tys_TG_1
WITH NON-UNIQUE DEFAULT KEY.
data: e_s_result type tys_TG_1.
data: e_t_result type tyt_TG_1.
DATA : ITAB1 TYPE STANDARD TABLE OF /BIC/AZDSO_HYD00.
DATA : WA_ITAB TYPE /BIC/AZDSO_HYD00.
loop at RESULT_PACKAGE into e_s_result.
Select /BIC/ZIUTILICH /BIC/ZIRGRCH /BIC/ZPRODUCT FROM /BIC/AZDSO_HYD00 INTO
(e_s_result-/BIC/ZIUTILICH,
e_s_result-/BIC/ZIRGRCH,
e_s_result-/BIC/ZPRODUCT)
WHERE
COMP_CODE = e_s_result-COMP_CODE AND
PROFIT_CTR = e_s_result-PROFIT_CTR .
append e_s_result to e_t_result.
endselect.
clear e_s_result.
ENDLOOP.
refresh RESULT_PACKAGE.
move e_t_result[] to RESULT_PACKAGE[].
So im getting TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table..
I think there is a problem in the code. pls look it and modify it.
Regards
kumarHello Kumar,
The amount of data you can store in an internal table is limited by the width of the table together with the available memory on your machine. If you try to put too much data in your table you'll always get that problem.
As I see it you have a table RESULT_PACKAGE with some fields and based on the entries in that table you select one row out of another table.
You can easily use
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
That still doesn't solve your memory problem hence you should try to process the data in packages, because you obviously don't have enough memory to process all data at once.
You can add the following:
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
PACKAGE SIZE xxxx
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
PROCESS your data here
ENDSELECT.
You might also want to discuss the issue with your basis team if there is a way to get more memory if there is no way to do that process.
Hope that helps,
Michael -
The "Need more storage space" prompt came up, and has options to close or go to settings. It's frozen, but active. Neither option works. Stuck on screen and can't do anything else, beyond activate suri. Suggestions?
Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the iPad restarts, so you will be able to use it again -
How to create more storage space without deleting apps
I need more storage space for my iphone 5s. I dont want to delete my apps. any ideas?
Hi pacificmission,
Welcome to Apple Support Communities.
This article should give you ideas about how to free up storage space on your iPhone 5s by showing you how to view storage space usage and remove less used content.
See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
Cheers,
-Jason -
F.05 : No more storage space is available for extending an internal table
Hi,
While executing F.05(FCV), I am getting ABAP Run time Error which is as below
Short Text: No more storage space is available for extending an internal table
Pls, Give me solution and get more points. It is very urgent
Thanks in advance
Akashcall your sap basis guys
i don't need any points -
Dump -- No more storage space available for extending an internal table
In Our system we are getting this dump
No more storage space available for extending an internal table
and because of it no user is able to login into the system.
We have Some classes in the system and we have defined shared memories to all classes according to regions.
So for a particular class means users of a region are not able to logon to systems and we are getting these dumps in the system.
So please suggest first how to clear the shared memory & how to conclude what activity in system made the shared memory full.
Regards,
Shivam MittalMy OS is HP-UNIX..
And we do not access on OS level,So please suggest the way to clear it from SAP level.
In dump it is also mentioned:
The internal table "\AREA=<Name>\INSTANCE=$DEFAULT_INSTANCE$\VER
SID=2\OBJ={O:1.2*\CLASS=<CLASS>\DATA=GT_BUFFER[1]-DATA" could
not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "\AREA=<Name>\INST=$DEFAULT_INSTANCE$\CLNT=100"
Row width: 156
Number of rows: 0
Allocated rows: 63
Newly requested rows: 1216 (in 19 blocks)
Please also suggest what is the internel table name that is causing the issue.
Regards,
Shivam Mittal
Maybe you are looking for
-
Step by step process of client import
hi Experts this is swathi, here i performed client export/import process(transport domain is same for both system) client export over with warnings and i need for client import below are my steps(performed) : after client import, i copied those co-
-
Error in Timebucket while using Fiscal Week
We have a requirement to run deployment to create deployment orders weekly. Hence we copied 9ANSNP94 and want to change the timebucket. The weeks definition over here is not the same as SAP Std. E.g Start Date End Date Week Number 1-Jan-13 6-Jan-13 W
-
Hi, I have created a site using muse that is hosted on Business Catalyst (webmarketing+). I have created and formatted the news module using the tutorialon Adobe TV and its working perfectly but I'm just wondering how to add images / pdf downloads to
-
Installing JDeveloper 10.1.3 on an amd64 machine
I get the following message when trying to run jdev: Oracle JDeveloper 10g 10.1.3 Copyright 1997, 2005 Oracle. All Rights Reserved Error: hotspot VM not supported Error: JDeveloper can't recognize the JDK version I have used both jdk-1_5_0_05-linux-a
-
How to improve/boost cell signal in Rural area?
I live in rural GA and on the edge of the Verizon 3G/1X coverage. Presently, I have dial-up for internet access which is ungodly slow; I am wanting to know if there is any equipment that can boost/improve the cellular signal to possibly use a Verizon