My web page don't work on a Pc

Hey m8 all the images in my web page dissapear in a pc computer... Help!

What is your url?

Similar Messages

  • Hyperlinks to web pages don't work in Captivate 7 or 8

    When I design hyperlinks to web pages work but once published they don't. How do i get hyperlinks to web pages to work in Captivate 7 or 8

    I should have read that more closely.
    It doesn't seem to apply. The only reason that would matter is if you were running the SWF-output from Captivate locally.
    ALWAYS test your product from the web to avoid any such security issues.
    But yes, if you're putting the published file on a local/network drive, then that security change will need to be applied and, yes, for every computer that accesses the file.
    You definitely want to distribute from an HTTP location.
    I did hope the first part of that article would help. They're not difficult to setup once you find the option. Just highlight some text and right-click to setup the hyperlink...right?

  • After upgrading to Mac OS Lion, even after installing Java manually, some web pages don't download and appear blank whereas Firefox works

    After upgrading to Mac OS Lion, even after installing Java manually, some web pages don't download and appear blank whereas Firefox and Opera work. Can someone help?

    Might be a third party Safari addon that was compatible with Snow Leopard but not Lion that's preventing pages to load. That add on may not have any effect on the other browsers, just Safari.
    Read here  >  Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    Also, if you have Little Snitch or Peer Guardian or anti virus sofware installed on your Mac, that might prevent pages to load also.

  • Firefox froze up. So I removed from computer and reloaded. If I close Firefox, can't restart by clicking on the icon. Have to end process in Task Manager. It then starts. Some links on some web pages won't work.

    Hi,
    As I say in the question I don't know what happened but Firefox just stopped operating and then became erratic. So I removed the firefox programme from my computer and reloaded Firefox.
    It now runs normally but I can't run Firefox on two tabs, only one, and if I close it down during a session I can't reopen it using the desk top icon. I go to task manager, processes, and end process for Firefox - then I can start it using the icon on the desktop.
    I have also noticed that some links on a web page won't work - javascript is involved.
    Thanks for your herlp,
    Mike FD

    It sounds like you are getting in a hurry.
    If you force Firefox to close in a hurry, then it won't normally start until you re-start the computer. There are ways around this, but I'm not going to go into them right now.
    None-force way to close Firefox down: Close the program and wait. Do something else. Firefox appears as if it is closed, but it's not. Firefox cleans out cookies and it's cache after you close it. That takes a few minutes. You can't restart it while it's doing house cleaning.
    After it is done, then you can restart Firefox normally. You can watch it in the Task Manager.
    The same applies if you are installing javascript. You have to wait a few minutes.
    As for running it with multiple tabs, I usually have 5 or 6, or more, tabs open at a time. Have no idea what the problem is there. Firefox needs special permission by use of a pop-up option to close with multiple tabs open.

  • How do i fix my printer when it won't show the print preview for web pages? it worked and now not.

    how do i fix my printer when it won't show the print preview for web pages?  it worked for a while and now it doesn't.  printer is an hp officejet 7310 all-in-one.

    I would suspect this is a hardware issue.  The rollers are probably having issues picking up the relatively smooth thick media.  You might have better results be cleaning the paper pickup rollers with a damp paper towel.  Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
    Regards,
    Bob Headrick, MS MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • A few of my pages don't work with Firefox nor Chrome. How do I fix this?

    I created my website from scratch (enjoyaquatics.com) but unfortunately a few of my pages don't work with Firefox nor Chrome. How do I fix this?
    Everything looks and works GREAT on Safari but not Firefox, Chrome, nor Internet Explorer.

    The pages look fine in FF and Chrome on my Mac. Didn't check with Win XP.
    If you use MSIE on a Mac, know that it became obsolete in 2003.
    I noticed what I call wobbly text on your pages. Here's the solution :
         iWeb : Prevent wobbly text in textboxes

  • My eBay pages don't work properly. There are parts missing. The symbols on the My eBay page have gone. The £ paid sign, checkout, feedback, and probably more. I can't list an item as the submit button has disappeared. It all works fine on IE.

    My eBay pages don’t work properly. There are parts missing. The symbols on the My eBay page have gone. The £ paid sign, checkout, feedback, and probably more.
    I can’t list an item, as the submit button has disappeared.
    It all works fine on IE. I’ve uninstalled and reinstalled Firefox, but still the same.
    How can I regain my missing bits please.
    Thanks

    Can you attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
    See http://kb.mozillazine.org/Websites_look_wrong
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Pre+ help pages don't work

    Does anybody know why the Palm Pre+ help page don't work? Everytime I ask for help on ANY subject all I get is a message that reads "Failed to load requested page"
    I guess the palm is trying to load a page from the internet, but the server can't provide/find it. This implies that the problem is probably at HP's end
    Post relates to: Pre p100ueu (O2)

    Hello
    May you pack the xxx.Pages document thru the "Make an archive…" item of the Finder's menu File?
    Then, attach the created zip file to a mail and send it to:
    koenig PERIOD yvan AT tele2 PERIOD fr
    I will try to revive it.
    Yvan KOENIG (from FRANCE mardi 11 décembre 2007 18:12:34)

  • Search page don't work after moving VO under another VO (by creating VL)

    Hi, all! I need Your help and explaining... So, please let me discuss my problem.
    I had my Search page. In my search page I search for records using APasesDati VO. On day I deside to move APasesDati VO under LVAIKolekcijaDati VO (created 1 to 1 VL). Now APasesDati VO is child of LVAIKolekcijaDati VO. And my search page don't work any more.
    When I search for a record in Search form and try to navigate to this record, then I have following error: please see, - http://www.jetScreenshot.com/demo/20110516-867-20kb.jpg
    Then I take a look to perv. Search page Bindings node (before move APasesDati VO under LVAIKolekcijaDati VO) and then to new Search page Bindings node (after move APasesDati VO under LVAIKolekcijaDati VO). There was differences, please see: - http://www.jetScreenshot.com/demo/20110516-o7f-75kb.jpg
    There in Data Control isn't APasesDati VO (as I move it under LVAIKolekcijaDati VO). And that is the problem why my Search page don't work correctly. What can be done in this situation?
    I tried to recreate APasesDatiIterator in Search page Executables, but I can't create this iterator. Please, see, - http://www.jetScreenshot.com/demo/20110516-x3g-68kb.jpg I think if I can create this iterator again, then all would work. But I can't.
    I want to know WHY I can't create Iterator in Executables from Data Controls child element? And How can I resolve my problem?
    If there are some miss understanding or need mor information, then please let me know!
    Waiting for responses, best regards, Debuger!

    Dear, Frank! Can You please, say how can I resolve my problem? My goal is to search for records in VOc (children object) and then from Search page SELECT RECORD and then go to page where VOc object is represented (on correct record). How can I do that?
    Best regards, Debuger!

  • In Safari, the link to "mail this web page" doesn't work, and the share link shows "no service". Does anyone have a solution? I have a MacBook Pro and upgraded to Yosemite yesterday

    In Safari, the link to "mail this web page" doesn't work, and the share link shows "no service". Does anyone have a solution? I have a MacBook Pro and upgraded to Yosemite yesterday.

    See here:  If sharing options and Markup are missing after you install OS X Yosemite
    This resolved the issue for me.
    Rick

  • Web pages don't load until I start Safari also

    Random web pages don't load - I wait - and then as soon as I start Safari to load that web page, the web page then loads immediately on Firefox.
    == This happened ==
    A few times a week
    == Months ago

    That did it, Oxy. Thank you so much for the fast reply! Just a quick question if you return to this thread: Is that a new feature or something I didn't notice before that mistakenly got selected?
    I'll browse through the options to see if there is anything else new.

  • Web pages don't fill the screen completely and with the font settings on 16 or larger the links and letters/words overlay making it difficult to read.

    Web pages don't fill the entire monitor screen and words overlay

    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    *https://support.mozilla.org/kb/Changing+fonts+and+colors

  • Parts of pages don't work in ALL web browsers?

    There's a site where I'm a registered user and have a profile page. One one of my PowerBook G4s, all the frames and content appear fine and I can use the tabs and pull-down menus no matter which browser I use (Safari or Firefox). On my other PB G4 though, these things don't work no matter WHICH browser I use--I've tried Safari, Firefox and Camino. Under the content tabs, there is no content and I can't highlight the other tabs. If I click on a pull-down menu, nothing appears.
    I tried emptying the cache of all of them. I went through all the preferences for each browser and for system prefs and matched them to what's on the PB G4 that works--but these items still don't work on the one laptop. Obviously this isn't a browser issue so I'm thinking it has something to do with the operating system? Any help would be greatly appreciated. Thanks!

    Here's the Terminal output:
    Kim-St-Ours-Computer:~ kimstours$ ifconfig
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet 127.0.0.1 netmask 0xff000000
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:0d:93:af:7e:10
    media: autoselect (none) status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::20d:93ff:fe8b:5810%en1 prefixlen 64 scopeid 0x5
    inet 10.0.1.2 netmask 0xffffff00 broadcast 10.0.1.255
    ether 00:0d:93:8b:58:10
    media: autoselect status: active
    supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:0d:93:ff:fe:af:7e:10
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>
    Kim-St-Ours-Computer:~ kimstours$
    Console log just keeps repeating this:
    2007-01-04 18:49:34.336 SyndicationAgent[2281] WARNING: BestCalendarDateFromString - can't interpret: 'Thu 04 Jan 2007 16:58:48 -800'
    System log:
    Jan 4 18:27:33 Kim-St-Ours-Computer STMStart: kCGErrorRangeCheck : Window Server communications from outside of session allowed for root and console user only
    Jan 4 18:27:37 Kim-St-Ours-Computer AL_CX11-1: ATSFontGetPostScriptName failed: error -984.
    Jan 4 18:27:38 Kim-St-Ours-Computer AL_CX11-1: ATSFontGetPostScriptName failed: error -984.
    Jan 4 18:27:38 Kim-St-Ours-Computer AL_CX11-1: ATSFontGetPostScriptName failed: error -984.
    Jan 4 18:27:38 Kim-St-Ours-Computer AL_CX11-1: ATSFontGetPostScriptName failed: error -984.
    Did that tell us something?

  • Menus on some web sites don't work

    I have just activated 2 new Lumia 520 phones with Windows 8 mobile. (updated to Amber)
    When browsing the web, the menus don't work on a couple of web sites that I have written.
    These menus use Javascript to show drop down lists and to navigate to the appropriate pages. When you click a link on the menu, the drop down menu appears for a couple of seconds, then disappears. Even in the couple of seconds that the dropdown appears, it can not be clicked.
    Interestingly, these web sites also use javascript to open overlay pages when a thumbnail picture is clicked, This action works.
    These menus have been regression tested in all the major browsers and they work on a PC, Mac, iPad and Android but seem to fail on Windows 8 mobile.
    I searched and can't see any option that allows me to enable or disable Javascript.
    Here are links to those 2 sites:
    http://www.garynancy.com/index.html
    http://www.chisholmtv.com/
    What am I missing?

    The menuscript (popupmo.js) you are using will not work.
    I'd suggest you take this to http://developer.nokia.com where you will likely find more help as this is a general user to user support platform.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Print / Export on web page no longer works for Crystal Report

    I am honestly at a loss, for days, the report would allow me to click on the printer icon and print to PDF or export the result of the report, but now, all I get is a blank page when the page refreshes. It no longer asks me for print range or anything. I thought this might be a IE 6 setting, but after reviewing the settings and placing the site in my trusted sites list, I still can't print.Is there a web.config setting I need to know about to make sure that export and print are enabled?
    I get no error messages at all, it is as if the button is broke, but I have no way to troubleshoot the innerworkings of crystal xi r2 buttons on the web page. If I could just step though the script it uses that would atleast let me see what is going on, but right now, I am stuck.
    Thanks for your help ahead of time.

    I've went a bit farther than that, I created a virtual directory and placed the aspx file (and its associated ascx and designer files) into that folder along with the report, then I placed a basic web.config file with only crystal required elements within that folder. I disconnected that version of the viewing page from the master web file so that it no longer used a master file, I setup the assembly register at the top under the control section, then I placed the viewer and source on that page. Same end result, the report shows but when clicking on any option, the page is blank but source shows that there is javascript there. My report is not autobound, it is programatically generated from a click of a button.
    These were my assumptions:
    1) when the report is generated, it is on the page and the session information has everything it needs to know about the report
    2) when an option is selected, either clicking on the tree, the zoom, the print or export (or other options), that the view information is passed back during the postback event to the controls so that the report would not have to be regenerated
    What I am finding out, at the very least through trials, is that an autobound report, the controls work, but a manual bound report, the pages are blank after selection of any of the listed javascripted items. On top of that, the only time that this seems to be working on a manual bound page is that the page can contain nothing but the report and that the report must be rebuilt on page_load event. Which is not good.
    What 'should' be the desired design, is that Crystal writes to a session variable, the report data so that on a post back event, it understands what we want without having to do a full report reload. This would be optional of course because in its current design, each event triggered causes a repost of new data and never last pulled information, so that if there was a change in records, the event pulls the most up to date information. This is not documented anywhere that I have found for web design.
    So then, another problem along the same lines has arrisen. As you say, Crystal doesn't play well with AJAX, but AJAX is a requirement for the project and I need to have a progress bar for the report since ultimately the page is waiting on the report to show. Depending on the report and the postback, this could be a while, If it takes a minute for the initial view of the report to show, all events on the page will trigger a full refresh of the report and subsequent pulls will take the same time since the controls don't allow for 'use posted data' instead of 'pull new data'.
    Taking your suggestion, I removed the view from the panel and placed it above the panel control. At this point, the tree node script works, the zoom script works, all of the controls in the control colection on the report work, except export and print, those two still do not work. This is with me also placing the call to the buildreport on page_load event.
    What is even more troubling, is that not until I had removed the UpdatePanel and UpdateProgress controls from the page completely did the export or print work at all. With the fact those two exist anywhere on the page in general causes a problem. Again, not a desired result. I need a live visual effect for the user that something is going on because some of the reports take seconds while others can take minutes depending on the pull and they need to know that 'something' is going on.
    Removing UpdatePanel and UpdateProgress is not an option.

Maybe you are looking for