My webapp was copied and posted in the Webapp directory!

This is getting quite ridiculous. My webapp was completely copied by somebody else. They even had the nerve to put a Paypal donation link in it for all of "their hard work". Now today I go into the Sports webapp section and notice that my own webapp has not only been copied but REPLACED by the copied version! What in the world is going on here?? Is there any way I can report this directly to Apple? I put a lot of time and effort into my webapp and to have it stolen and even replaced in the webapp directory is just disgusting. I contacted the person that did this and told them if they wanted to copy my work atleast make the design a little bit different. All they did was just change the results button. Everything else is the same.
If you want to see my webapp versus the copied one check the links below.
The one I created..
http://sprintcup08.dustinmcgrew.com
The copied version..
http://www.michaelstambaugh.com/webapps/nascar/

Dustin,
Submissions are handled by Apple Developer Connection. For reference the submission page, and terms are here:
https://adcweb.apple.com/iphone/
The contact form for ADC is here: (Please note ADC membership has additional contact avenues as well)
http://developer.apple.com/contact/
The contacts for the Legal department are on this page, including for claims of copyright infringement:
http://www.apple.com/legal/contacts.html
Hope this helps,
Nathan C.

Similar Messages

  • On Word I was copying a sentence, but the command has not been executed and the timer is constantly circling. It has been circling for over 10 minues. How do I get out of this?

    On Word I was copying a sentence, but the command has not executed and the timing cursor has been circling for over 10 minutes. How do I get out of this?

    You probably will need to force-quit Word. Go to the Apple menu, choose "Force Quit", locate and select Word in the list of applications and click the "Force Quit" button. You will of course most likely lose any changes you made to the document since you last saved it (or it was auto-saved, if you have that option turned on in Word).
    Regards.

  • Event ID 36888 - Schannel - A fatal alert was generated and sent to the remote endpoint.

    Exchange 2013:  2 x multi-role in one DAG - on-premise
    Performing remote mailbox migration using internet (*non-exchange web-based  tool*), to ship data from cloud Ex2010 server to Ex013 on-premise.
    Have multiple failures when doing the mailbox data copy - my migration tool error code tells me that:
    This error indicates that we were unable to authenticate to the source or destination mailbox and retrieve a list of folders when given 15
    minutes to complete these operations. This may be because the source or destination is unusually slow, has a very large number of folders, or due to "hanging" networking calls.
    Some mailboxes are copying, but around 80% are not.  Checked all permissions and other factors.
    I see in the System event log the following below:
    Log Name:      System
    Source:        Schannel
    Date:          9/14/2013 2:14:53 PM
    Event ID:      36888
    Task Category: None
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      server.domain.local
    Description:
    A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
        <EventID>36888</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2013-09-14T20:14:53.699840000Z" />
        <EventRecordID>135625</EventRecordID>
        <Correlation />
        <Execution ProcessID="544" ThreadID="17928" />
        <Channel>System</Channel>
        <Computer>server.domain.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="AlertDesc">10</Data>
        <Data Name="ErrorState">1203</Data>
      </EventData>
    </Event>
    Anyone seen this? - not much recording this error available for Ex2013.

    Hello,
    Thank you for your post.
    This is a quick note to let you know that we are performing research on this issue.
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support
    Hi Simon
    I opened a SEV B case  today.  Appears to directly reflect the amount of load i put through, in terms of data being shipped with our migration tool.  That tool is basically logging into each mailbox using a superuser account and populating
    it with mail and calendar data form a source cloud mailbox.  No fancy co-existence or online move requests.
    All throttle policies are removed.  Attempting to migrate more than 20 mailboxes at a time results in the System Event log being filled with the Schannel error above.  Reducing the amount below this still shows the errors appearing, but not enough
    to stop mailbox data being shipped and the migration tool suffering a stop error.
    I will update the thread tomorrow when i speak with the engineer.  Surprised noone has had any input so far.
    I have the same problem, here is some data. I have two exchange profiles and the 2nd one stops logging in after this error starts. I have to reset the wireless connection and restart outlook to clear the situation.
    Dave Ladouceur

  • I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

    IS THE SITUATION HOPELESS
    I used Target mode to transfer files to a new i7  iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
              Please tell me how to get this disc to eject !

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

    Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
    This in SharePoint 2013 Farm.
    What should I do?
    1- I did a DisableLoopBack and set the value to "1".
    For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
    P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

    Hi,
    For troubleshooting your issue, please take steps as below:
    1.Go to IIS, make sure the web application is actived.
    2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
    Reference:
    http://support.microsoft.com/en-us/kb/926642/en-us
    http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • HT203167 So my iPhone was stolen and most of the music on there was on a computer that I don't have anymore. Is it possible to get those songs back from my stolen phone or are they gone?

    So my iPhone was stolen and most of the music on there was on a computer that I don't have anymore. Is it possible to get those songs back from my stolen phone or are they gone?

    For iTunes purchased music you might be able to re-download it via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes. For music from other sources (e.g. copied from CDs) then unless you had subscribed to iTunes Match and uploaded it to it from your computer then no, it won't be stored anywhere

  • PO process by interface was wrongly GR posted.automatic the GR

    Hi Gurus,
            PO process by interface was wrongly GR posted.automatic the GR posting didn't registered the correct amount of the PO for the line item ($1746) but for less ($1) is posted.automatic GR posted with a wrong/different amount from line item.
         We are  canceled GR and post it again looking for system to recognize it correctly but this was useless.after GR posted for I$ DOLLAR,we are posted IR doc also.Im still pending for  analysis of the reason why this GR was wrongly posted,your  instructions and explanation of situation appreaciated.please help me.
    Regards
    SAP MM

    Hi,
    Check the tolerance limits defined in IMG under
    Materials Management -> Inventory Management and Physical Inventory -> Goods Receipt -> Tolerance Limits
    Also, check "over delivery" and "under delivery" tolerances defined in Material Master under "Purchasing" view.
    Also check in IMG under
    SAP Netweaver -> General Settings -> Currencies -> Define rounding rules for currencies
    For the company code/currency combination for which payments are to be made not in the smallest denomination, but in a multiple of it, enter the currency unit (rounding unit) to which amounts are to be rounded.
    This ensures that the amounts in this currency are always rounded to this unit (providing the amounts you enter manually are also rounded in line with your entry). The payment program evaluates your entries to determine the cash discount and rounds off the amount accordingly.
    Regards,
    Srilatha.

  • What are  Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

    BW on HANA :  Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
    We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
    Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
    Kindly help us in getting the exact course of action as requested.
    Thanks and Regards,
    Lavina Joshi

    Hi Lavina,
    try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
    Points to remember are:
    Preparation:
         -- Hardware Sizing
         -- Preparation of Data Centres
         -- HANA Hardware preparation
         -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
         -- House Keeping activities on BW system (data clean up, etc)
    Post Installation:
         -- Sanity checks / Preparation and License checks
         -- JAVA Configurations
         -- Infoprovider conversions 
    Overall Stages are described below:
    # Environmental setup (HANA box)
         -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
    # System readiness
                   - ZBW_HANA_COCKPIT Tool
                   - ZBW_HANA_CHECKLIST Tool
                   - ZBW_ABAP_ANALYZER Tool
                   - ZBW_TRANSFORM_FINDER Tool
                   - SIZING Report
                   - System Clean up Activities
                   - Impact of 7.4 on source system checks
                   - Java Upgrade for portal
    # DMO Stages
                   - Preparation & Pre Migration checks
                   - Execution / Migration
                   - Post Migration Activities
    # Testing Phase
                   - Source system checks/Activities
                   - System and Integration Testing
                   - End to End Testing
                   - Performance testing
                   - Reports
                   - BO reports / Interfaces
    Do let me know if you require any further information.
    Regards,
    Naren

  • How to copy and paste in the Maps app?

    I cant seem use copy and paste in the Maps app. Copy and paste works fine in all other apps but in the "Directions" or "Search" menus, I cant copy the text or paste any text in. Any Suggestions?
    3GS iOS 4.2.1

    I think it can be a little misleading,u must trying copying a map from Google maps within Safari, not from the Map application itself. It was a little difficult to get it to work, What I did was copy the portion of the page right below the map (it wouldn't work for the map itself) and then drag the copy bars up to the map. i hope it works. www.mobilemediacity.com/iphone/mapmyride-2

  • How to reverse the Credit memo in AR if it's created and posted into the GL

    Hi All,
    Can any one suggest on below issue:-
    If i have created a credit memo in AR and posted into the GL also. but after that i realizse that i have made a wrong entry now i want to rectify the errror .
    How do i rectify the entry if i created Credit memo in AR and it' posted into the GL also. Now want to resverse it. ?????????
    regards
    Sujeet

    Hi Sujeet,
    Please have a look, if the process suggested below is of any help:
    Subject:      How To Unpost Transactions in AR
         Doc ID:
    Note:219307.1     Type:      HOWTO
         Last Revision Date:      29-DEC-2005     Status:      PUBLISHED
    •     goal: How to unpost transactions in Accounts Receivable
    •     Goal: How to unpost a batch transferred from AR to GL
    •     Fact: Oracle Receivables
    •     Fact: Oracle General Ledger
    •     Fact: ARGLTP - General Ledger Transfer Program
    •     Fact: ARGCGP - Clear GL Interface Table
    Fix:
    Run the concurrent program ARGCGP to unpost (reset the posted status) for the
    Affected AR transactions.
    1. Verify the following before running ARGCGP.
    - The AR period affected is open
    - The correct posting_control_id is identified. Otherwise, running
    the program will make the problem worse by allowing data to be
    posted twice.
    - The batch has not been imported/posted to the GL
    (N) As GL Superuser, Navigate, Journals, Enter
    Query up batch name %<posting_control_id>%
    - The transactions cannot be found in the GL_INTERFACE table
    2. To run the program, it should be setup as a concurrent request.
    Note: The program can be run from the Unix command prompt however
    it will not pickup _ALL tables in a multi-org environment.
    - System Admin Responsibility: Concurrent > Program > Define
    - Query ARGCGP (as the short name)
    - Click 'Copy To'
    Give it a new program name and short name
    For example: ARGCGP-Reverse AR Posting
    - Click on Use in SRS
    - Save
    - Click on Parameters
    - Enter these parameters and save:
    Seq Paramater Valueset Default Value Required Display
    4 Set of Books id AR_SRS_SET_OF_BOOKS_ID Constant yes yes
    5 Posting_control_id 20 Characters yes yes
    6 Reset_gl_pst_date 6 Characters Constant Y yes yes
    7 del_gl_interface 6 Characters Constant Y yes yes
    8 debug_flag 6 Characters Constant N yes yes
    Description of Parameters
    - set_of_books_id = The ID for the book posted from AR
    - posting_control_id = the unique id for the original posting run from AR
    to GL. Can be identified by querying the
    AR_POSTING_CONTROL table if value is not known.
    - reset_gl_pst_date = (Y)es or (N)o flag to indicate if records in AR
    marked as posted should be reset so that they are
    postable again
    - del_gl_interface = (Y)es or (N)o flag to indicate if records for this
    posting_control_id should be deleted from
    gl_interface table
    - debug_flag = (Y)es or (N)o flag to put additional debug
    information in the log file
    3. Add the new program to Revenue Recognition Request Group.
    - Security > Responsibility > Request
    - Query up Group Revenue Recognition, Application Oracle Receivables
    - Add a new line
    - Report and from LOV choose ARGCGP-SRS
    - Save
    4. Change the user's responsiblity to Receivables User and run the process.
    5. Rerun the GL Interface.
    * WARNING: Before updating any tables in SQL*Plus,
    * perform a BACKUP of the affected tables.
    Additional info:
    When you cannot enter any parameters under point 2, please check if there is
    clicked on Use in SRS.
    Thanks
    Manish Jain.

  • Bought an ipod 4g at a pawn shop, it was locked and disabled but the guy said I could restore it, it didn't work and he won't take back the ipod what do i do?

    I bought an ipod 4g at a pawn shop, it was locked and disabled but the guy said I could restore it by connecting it to my computer and pressing the home and sleep buttons at the same time, it didn't work and he won't take back the ipod what do i do?
    When I try connecting it to my computer itunes opens and says I cannot connect to the ipod because it is disabled, enter passcode on ipod. The ipod is locked and disabled and will not allow me to try and put in a passcode, which I wouldn't be able to do because I have no idea what it might have been.
    I downloaded the newest version of Itunes, restarted computer, connected ipod, nothing, held every button down for what seems like forever, nothing. I think I have been screwed by the pawnshop. Is there anyway of restoring this thing or is now just a $60.00 paperweight?

    torreto44. that does not work with a Disabled iPod. Jim's gave the correct answer for a Disabled iPod
    torreto44 wrote:
    Hey man don't worry bout it ! Hold the power button and the circle button for a long time and it should reboot meaning the iPod will restart and u can set it up as yours with new apple i.d and password

  • I downloaded an app off the store which said it was free and part of the 5 year promotion. I've been charged for the app by the store. I don't want the app and there's no one to speak to about it. Who can I call and how can I get the app off my phone?

    I downloaded an app off the store which said it was free and part of the 5 year promotion.
    I've been charged for the app by the store. I don't want the app and there's no one to speak to about it.
    Who can I call?
    How can I get the app off my phone?
    How do I get my money back from something I wouldn't have ordered?

    You cannot call anyone.  You contact them as everyone else does:  http://www.apple.com/support/itunes/contact/
    You delete the app as you do any other app.  Hold an icon until they wiggle.  Tap the "x".  This is covered in the manual.

  • I can no longer copy and paste in the google search field on my iPhone4 after I updated to ISO6.0

    I can no longer copy and paste in the google search field on my iPhone4, after I updated to ISO 6.0? Anyone else having this problem?

    try
    Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears then let both buttons go and wait for the phone to restart.

  • I have a new mac book air and somehow iPhoto was installed twice.  Also, a second library was created and it became the default library.  I attempted to switch to the original library but it won't open.  what can I do to revert to the old library?

    I have a new mac book air and somehow iPhoto was installed twice.  Also, a second library was created and it became the default library.  I attempted to switch to the original library but it won't open.  what can I do to revert to the old library?

    Both iPhotos open to a default library (#2) which has 300+ photos,  I attempted to "switch to library" under the file tab in iPhoto and tried to choose "other library" which had most of my photos.  When I attempt to open it, it doesn't do anything.  I can see it and there are 2 libraries but it won't open.
    Have you tried to open your old iPhoto library by double-clicking it directly, instead of using the File menu?  That should work, if you are running iPhoto '11 and the library has been created by that version or an older version.  DO you get an error message, if you select the library directly in the Finder?
    I checked and it is the latest version of iPhoto.
    Is it iPhoto '11, version 6.0.5? "Latest version" is ambiguous, because it will depend on your system version.
    Where is your iPhoto Library stored?

  • HT4061 my iphone was stolen and i want the serial ?

    my iphone was stolen and i want the serial ?

    The serial number is embedded in the iTunes on the computer to which you originally sync'd the iPhone.
    http://support.apple.com/kb/HT4061?viewlocale=en_US&locale=en_US

Maybe you are looking for

  • End-of-file on communicaton channel when creating text index on xmltype ta

    Hi, I'm trying to create an oracle text index on a table of xmltype. This table is using an xml schema and the table is using object relational storage. I have another table that is a relational table that has an xml type column, and I was able to cr

  • Smartform printing error

    Hi , I'm trying to print a smartform but there is a problem when I try it from the spool(SP01). The message is : incorrect (Reason unknown); Log :       SAP spool error log       ===================== Print request processing log Errors occurred proc

  • [SOLVED]Calibre crashed when it starts

    Hi, After a fresh installation and configuration of calibre, I start it. Then it crashes. $ calibre QWidget::repaint: Recursive repaint detected Traceback (most recent call last): File "/usr/lib/calibre/calibre/gui2/library/delegates.py", line 121, i

  • BW on HANA with Federated Portal?

    Hi Everyone, We are running BW on HANA 7.3 with an ABAP only installation and we have a separate BW on DB2 instance. The BW on DB2 is linked to our Enterprise Portal and this supports BEx Web Queries and Templates but we would like to now enable Web

  • Window.open error in IE

    G'day.      I have a page http://ebogott.com/recipeBox.php# that works well in Firefox, Opera and Safari. If it matters, the links that are failing are part of a spry:repeatchildren table. It gives me a javascript error and fails to run in IE. The er