My webcam will not come on when I am using a usb port for my mic.

I have recently started having an issue with my isight not coming on if there is an agregate audio device plugged in, such as my usb presonus, I would like to be able to simultaneously Record in GarageBand or other recording software while recording video imovie. This used to work fine So I'm not sure if I changed a setting or what happened. Please help me with this issue.

That unfortunately did not help. Is there any more info I can give to help you understand whats going on?
I have an Audiobox 44vsl that plugs into a USB port to be used as a mic/ instrument interface with my MacBook Pro.
When I open Garageband or Presonus Audio software I can record and all that but if i try to simultaneously use iSight such as in iMovie or Skype it doesn't even turn the camera on (no green light) but if I unplug the Audiobox it works fine. I used to be able to do this just fine but just recently it stopped working.

Similar Messages

Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

I'm not 100% sure, but I believe you need Acrobat Pro for that.

HT1338 MacBook Pro 13.3: Desktop screen will not come up when turned on. Screen is blank except for an icon of a folder with a question mark on it, in the middle of an otherwise blank screen, laptop making a clicking noise.

My MacBook Pro 13.3 MAC OS X v10.7 laptop will not come up. Blank screen comes up, no color/desktop, etc., only an icon of a folder in the middle of the screen with a question mark on the folder. Laptop making a clicking noise. Suggestions? Thanks!

It's under warranty. Take it in to have Apple fix it.
The "flashing ?" means the machine can't find the start up disk. The clicking noise is a give away that the drive is damaged.

HT2978 my iphone went black and it will not come back even after i held the two bottons for over a min

my iphone went black and it will not come back on even after i held the botons down for a min

Hey dodie67,
Thanks for the question. Sounds like your iPhone stopped responding to buttons, switches, or touchscreen input, so you'd want to go through the troubleshooting steps in the following article and see if that resolves the issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Take care,
David

HT1766 My iPhone 4S suddenly shut down and will not come back on. Does anyone have an answer for this problem?

My iPhone shut down and will not come back on. Can anyone give me an answer on how to correct this problem?

Connect to a wall outlet so you have solid power, then do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.

Installed 7.0 on computer yesterday, will not come on when I clock on

I installed the update for Firefox yesterday and now when I click on it to go to Firefox, clicking twice, the arrow & hour glass disappear and nothing happens. When I updated yesterday, it asked me a question about the apps or something on my computer and I may have answered when I didn't want to but I cannot get to the internet using Firefox now. What can I do?

Not sure what the problem is, but you may have temporary dificulty getting firefox 7 back again, IF it is not already installed.
(Updates from Firefox 6 to firefox 7 were apparently [https://support.mozilla.com/en-US/forums/contributors/707670#post-42774 suspended] yesterday. It appears an update probably firefox 7.1 is being released to correct a problem with it loosing some extension updates as it updated firefox in some instances. )
What exactly is your current problem
* is it that firefox will open but not connect to the internet ?
* one problem is security software or firewals not recognising the new software, they may need resetting see also
** [[firewalls]]
** [[firefox will not start]]

Hotsync Manager will not come up when I double click on Hotsync - device will not Hotsync

I have a Windows 7 64 bit PC and am trying to hotsync using USB to a MEZ1000 Palm device from Aceeca. I am using their 64 bit driver for the USB. I installed Palm Desktop 6.2 and the Acceca 64 bit driver about 4 months ago and it was working fine. A few days ago I tried to hotsync and it wouldn't. Tried rebooting PC and uninstalling and reinstalling the Palm desktop and Aceeca driver. I have done that 2 - 3 times following the clean uninstall instructions that I found on this forum. The install hangs when it tries to configure the registry. I can see the hotsync.exe process in the task manager. The install will not proceed past this point unless I end the process in the Task Manager. Also, in searching the PC for anything named hotsync, I found a file called Report.wer that was dated 04/02/12 (the day I first tried to hotsync and failed) in C:\Users\ADMIN\AppData\Local\Microsoft\Windows\WER\ReportArchive\Critical_Hotsync.exe_599940f2117296adef2f8cf88fb71dd13d49811c_453e7b5c
The contents of this file are below:
Version=1
EventType=AppHangB1
EventTime=129778767824850795
ReportType=1
Consent=1
UploadTime=129778767828594802
ReportIdentifier=442d0996-7d0d-11e1-b71f-3860773c8550
IntegratorReportIdentifier=442d0997-7d0d-11e1-b71f-3860773c8550
WOW64=1
Response.BucketId=503651033
Response.BucketTable=5
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=Hotsync.exe
Sig[1].Name=Application Version
Sig[1].Value=7.0.2.0
Sig[2].Name=Application Timestamp
Sig[2].Value=477d91d1
Sig[3].Name=Hang Signature
Sig[3].Value=bc1c
Sig[4].Name=Hang Type
Sig[4].Value=6144
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Hang Signature 1
DynamicSig[22].Value=bc1cf0b12edd45838931663a910ff30a
DynamicSig[23].Name=Additional Hang Signature 2
DynamicSig[23].Value=f395
DynamicSig[24].Name=Additional Hang Signature 3
DynamicSig[24].Value=f3958bdfd9e79ef2d3426c5f57683e36
DynamicSig[25].Name=Additional Hang Signature 4
DynamicSig[25].Value=bc1c
DynamicSig[26].Name=Additional Hang Signature 5
DynamicSig[26].Value=bc1cf0b12edd45838931663a910ff30a
DynamicSig[27].Name=Additional Hang Signature 6
DynamicSig[27].Value=f395
DynamicSig[28].Name=Additional Hang Signature 7
DynamicSig[28].Value=f3958bdfd9e79ef2d3426c5f57683e36
UI[3]=HotSync® Manager Application is not responding
UI[4]=If you close the program, you might lose information.
UI[5]=Close the program
UI[6]=Close the program
UI[7]=Close the program
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped responding and was closed
ConsentKey=AppHangXProcB1
AppName=HotSync® Manager Application
AppPath=C:\Program Files (x86)\Palm\Hotsync.exe
ReportDescription=A problem caused this program to stop interacting with Windows.
Can anyone help me?
Post relates to: HP TouchPad (WiFi)

Okay - I got preview back - it seems to have gotten hung and corrupted, so I went to library and fixed the permissions there
Click on "Go" in the Finder menu bar while holding down ⌘ key and you will see Library appear in the pull-down menu, click on it and it will take you to the "Library Folder".
Hit the ⌘I keys, to get to pull up the “Get Info” window on the “Library Folder”.
Unlock the pad lock in the lower right hand corner.
Click on the + symbol to add a user.
When prompt add the 'root user'.
Give the root user Read/Write privileges.
Lock the pad lock and open Preview.
But that wasn't enough so I went back to disk repair and even though I had just run it , this tim it fixed a slew of permissions problems -
I then restarted and viola - I was able to use Preview again.
Computer is running a little fast too.
Thank you everyone..

EOS 7D will not come on when a fresh rechargeable battery is installed and switch turned to on

A real Canon brand battery and a real Canon brand charger?If not it may be a faulty cheap battery and/or charger. If it is, your 7D might need service.

ebiggs1 wrote:
"One is located on the memory card door (a tiny tab on the door engages the switch hidden in the edge of the door-frame.)" It has been a while since I sold my last 7D but I don't think this will stop the 7D from powering on. The door being closed or open or even no CF card will not stop it. On the other hand the battery door switch will. ...I do still have my 7D's, and Ernie is wrong. If either door is open, the camera will not turn on. (But he's right that a CF card need not be present.) Sorry, Ernie!

IMac will not boot up when printer is plugged in USB

After buying my new iMac (with Tiger) I successfully transfered everything from my old iMac (with Panther) and all was well.
The problem is that when my printer (Canon Pixma MP130) is plugged in on start up, the iMac will not boot up (no gears turning on the white/grey screen). When I unplug the printer from the USB and start it up, it works fine. Its not a super big deal because I can just plug the printer in when I need it. But why does it do this?
I foound on the internet someone else who had the same issues. It was suggested to him to search the printer manufacturers website for updated drivers. I did this, installed them etc..... still no luck.
I am without any mac guru's here in Yellowknife......help!
Angie

Hello there,
I hope it is OK to recycle this old thread.  I did not want to create a new one since I am experiencing the exact same issue as the original poster *flying girl* as well as other posters in the following threads:
http://discussions.apple.com/thread.jspa?messageID=4190807
http://discussions.apple.com/thread.jspa?messageID=3950255
http://discussions.apple.com/thread.jspa?messageID=4201169
http://discussions.apple.com/thread.jspa?messageID=4490899&#4490899
http://discussions.apple.com/thread.jspa?messageID=4470944
I have two Macs, a PowerBook G4 and an Intel iMac 20" (Aluminum)--please refer to my signature or profile for the specs of these machines.  Of course, I got the PowerBook before I got the iMac.  I am running the latest version of the Canon MP130 drivers, printer drivers version 4.8.3 and scanner drivers version 12.11.0, on both machines.
When I turn on my PowerBook with the Canon PIXMA MP130 multifunction turned ON and connected via USB to the PowerBook, the PowerBook boots up just fine.  I have even experimented with both a USB hub and a direct connection to the Canon MP130, and the PowerBook boots fine in both instances.
However, when I turn on my iMac with the Canon MP130 turned ON and connected via USB to the iMac, the startup tone plays, and then the iMac hangs at the blue/gray solid screen--it does not even show the Apple logo or the spokes--that is, until I turn the Canon MP130 OFF.  When I turn it off, the Apple logo appears, the spokes move, and my iMac boots up just fine.  And as long as the MP130 is OFF, I can boot the iMac fine from scratch too.
I tried starting in verbose mode (⌘V) and single-user mode (⌘S), and the gray/blue screen still appears after the startup tone plays; again, if I turn the Canon MP130 OFF, the rest of the boot sequence resumes as normal, and only then do I get to see the descriptive text for those startup modes.  But the text goes by so fast that I miss most of it--I did manage to catch something that said something like "get full config descriptor = NULL," but I am not sure if that was the exact wording.  I would need a good camcorder or even just a digital camera or another device to capture exactly what the screen says in verbose mode.  If I had those options, I would post pictures here.
I was thinking about contacting Canon, but since the issue happens on one Mac only, I figured they would tell me that it is a problem with my Mac.  So hopefully posting the information here is OK.
Another key feature is that the Canon MP130 has a built-in card reader.  I made sure that my Startup Disk preferences were set to boot from the system drive, and they still are.  And I have reset the SMC and PRAM on the iMac.
I would like to mention the following link:
http://www.ehmac.ca/anything-mac/50389-intel-imac-wont-boot-when-canon-printer-p lugged.html
If you go to page 2 on that above thread, it shows one user who allegedly physically disconnected the card reader connection from the inside of the Canon MP130 (I would NOT recommend that myself).  I just wonder if there is a more feasible resolution to this issue.
Does anyone else experience the same issue with other printers or multifunctions?  Also, why does the issue occur only on my Intel iMac 20" (aluminum), and NOT on my PowerBook G4?
Please let us know about your experience as it seems many of us are at a loss for a solution.
Thank you very much for your help; we await!  :)
Cya!
\m/ Mad Metal Mage \m/

My phone will not come on,when i try to restore the phone it says the iphone could not be restored unknown error occured 21 someone please help!!

can some one help me with this ? i tried to do hard reset no luck, when i try to restore the iphone it says unknown error 21

Yeah i getting the same error on my iphone3gs. Ive tried eveything i think if you find something out PLEASE let me know. Im going to send mine in though bc i cant take going with out a phone anymore. GOOD LUCK!!!!!

HT1430 My iphone 4, the apple logo just blank on and off. Will not come on when I press the on button.

My iphone 4, the apple logo just blank on and off.

You may have to let the battery fully drain
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipod touch has been dead for about three or for weeks now it will not come back on, my ipod touch has been dead for about three or for weeks now it will not come back on

My ipod touch was dead for about three weeks, i charged it all last night and most of today, why wont it come back on? Can anyone give me advice?

https://discussions.apple.com/message/15201309#15201309
Same advice you got the first time you asked the same question.

HT203421 I have two mac computers, one pro and one mini. I am having trouble with singing-in to Apple with One password. The computer I make it on will sign-in OK but if I try it with the other, it will not recognize it. I am using only one email for

I have two Apple computer, a Mac Pro and a Mac Mini.. When I attemped to sign in on Apple on one of the computer (Mac Pro) that I made the password on, will work OK but if I got to the other computer (Mac Mini) and sign in, it will tell me I am using the wrong password, so if I go and make a different password for the Mac Mini computer with the same email for both computer, it will work for the Mac Mini computer but not the Pro..
I have even made another email account for the Mini and tried that but it will still go back to the original.. What can I do or need to do to correct this?? Please Help if you can>> Betty

I have two Apple computer, a Mac Pro and a Mac Mini.. When I attemped to sign in on Apple on one of the computer (Mac Pro) that I made the password on, will work OK but if I got to the other computer (Mac Mini) and sign in, it will tell me I am using the wrong password, so if I go and make a different password for the Mac Mini computer with the same email for both computer, it will work for the Mac Mini computer but not the Pro..
I have even made another email account for the Mini and tried that but it will still go back to the original.. What can I do or need to do to correct this?? Please Help if you can>> Betty

Pix will not download complete when sent

picture will not download complete when sent.

Hello, Wallsie.
Thank you for visiting Apple Support Communities.
Try closing, relaunching iTunes and attempt to download the missing purchases by following the steps in the article below.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
If the issues persists I would recommend troubleshooting the connection to the iTunes Store by following the steps in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

I'm using Windows 7 I have downloaded Firefox 17 It will not load I go to uninstall and it will not uninstall. When try to go to a website I gt cant load xpcom

I'm using Windows 7 I downloaded Firefox 17 It will not load I go to uninstall and it will not uninstall. When I am using Thunderbird I try to go to a web site and I get the error code couldn't load xpcom.
How do I unistall this mess and start over again???

Please go to www.getfirefox.com and download Firefox 24 (don't use Firefox 17 it's not supported) and install it.

My webcam will not come on when I am using a usb port for my mic.

Similar Messages

Maybe you are looking for