My webcam won't work on my macbook!

I rarely ever use it, but when I do it won't work at all. It's never worked in Ichat and now it won't work in a chatroom.
I've had this problem ever since I got it. I never cared because It was never used but it's been bugging me.
Can someone help?
When I see the green light, I think it's working...it ends up not being the case. What's going on?

Then how do I make my isight camera work? I just restored my computer from the apple store, they gave me a new hardrive and everything, and when I turned on my macbook, I updated it and I tried to open photobooth, it said that the camera was being used by another application or there was no camera plugged in. The green light that was supposed to be on when its in use wasn't on (and right now it isn't on either) and so i know there is some problem. Is there a setting I have to turn on? Because I've gone through system preferences and I can't find one. Thanks.

Similar Messages

External dvd drive won't work on USB macBook air

External dvd drive won't work on my macBook air usb port. It works on older versions of air and iMac.
Any ideas. Tried the left shift, control, option and power button sumultaniously, but did not work.

I know that no one has replied yet, but figured out the issue. I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store. They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive. When I got home, I thought I would try one more thing. I hooked it up to a powered hub and it works perfectly. I'm not sure why no one else thought of it, but glad that I did.

CanoScan 9000F scanner won't work on my MacBook Pro even though it should be compatible with the Mac 10.7.2 OS.

My new CanoScan 900F scanner won't work on my MacBook Pro even though I've followed all instructions to make it compatible with the 10.7.2 OS. The USB connection isn't recognised. What else con I do?

I have a similar problem with a new CanoScan 9000F which I tried to use without any success on my desktop computer (Mac Pro 5,1) and laptop (Macbook Pro 1,2) both running OS 10.6. Problem is identical on both, viz:
• Scanning process appears to start, a message comes on the screen: Scanning do not open document cover followed by Scanning...
• This is then replaced by the message: Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. 2.155.33
I've spent several hours on the phone with Canon support but having uninstalled/installed/reinstalled/updated/turned on/turned off/unplugged/plugged/restarted innumerable times, the problem is exactly the same. The scanner icon shows up in the Printer & Fax System Prefs (though without the little status lights) and shows as being connected in the USB tree. I think it's a problem with the scanner, Canon bods are suggesting the Macs are at fault and suggest I try connecting to a wintel (hawk, spit) and it's 100km to the nearest Canon service centre.
Any suggestions as to what might be the problem/s and what I might be able to do to fix it/them?
Thanks.
By the way, bought the Canon to replace a HP Scanjet 8300 which I've used for 6 years almost without problems. Any that I have had have been fixed merely by turning the scanner off then on after a 10 second rest.

My iCloud password won't work in my MacBook Air but works in my IPhone5s.

My ICloud password won't work in my MacBook Air but works in my Iphone5s

Sorry, but your issue has nothing to do with Apple networking. You may get better results getting a solution if you repost to the iCloud area of the Apple Support Communities.

Satellite A300 - inbuilt Chicony webcam won't work with Win Live Messenger

Hello
I just bought a *Satellite A300-1MC* (runs on Vista Home Premium), and downloaded Windows Live Mail And Live Messenger.
The inbuilt webcam won't work with Live Messenger ; and when selecting Tool, Audi + Vieo Setup in Messenger I get thye following message : "We are unable to run Audi Video setup".
The webcam works fine with the Camera Assisant Software.
I have tried : 1) killing the C.A. Software and starting Messenger ; 2) dowanloading a webcam driver from Toshiba website ; 3) Updating Windows Vista
None of the above work.
Any suggestion gladly received.....
Thomas

Hi,
Many thanks for the advice.
I have downloaded and installed ManyCam 2.3, then rebooted.
The ManyCam software works fine, and picks up signal from the inbuild webcam.
But Windows Live Messenger still doesn't pick up the camera. I can not start a Video call or go to" Video Audio setup".
I have Windows Live Messenger version 14.0.8064 (installed on Tuesday).
Funny enough, yahoo messenger works fine : it gets a signal from the webcam.
Conclusion : i think it is Windows Live Messenger that doesn't work properly for some reason.
I have ordered a new external webcam, in the meantime.
Thomas

FaceTime won't work on my MacBook pro unless I tether it through my iPhone - FaceTime works great on my phone through the home wifi network but never connects on the MacBook anyone got any ideas

FaceTime won't work on my MacBook pro unless I tether it through my iPhone - FaceTime works great on my phone through the home wifi network but never connects on the MacBook anyone got any ideas

Hey mwe1978,
I understand that you are having issues with FaceTime on your MacBook. In my experience, the following article may provide best troubleshooting practices, and lead to a resolution:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
With FaceTime for Mac you can place and receive video calls to users of FaceTime on supported devices. Learn the system requirements for FaceTime for Mac and basic troubleshooting steps to resolve FaceTime for Mac activation and usage issues.
Thanks,
Matt M.

My airplay mirroring won't work with my macbook air, eventhoug my internet connection is very fast. The image will appear after 5 seconds.

My airplay mirroring won't work with my macbook air, eventhoug my internet connection is very fast. The image will appear after 5 seconds.

Mirroring is done over the local network so internet speed isn't relevant.
I would check istumbler.net to see if there is any interference

External back up won't work on Yosemite Macbook Pro

I downloaded OS X Yosemite a couple of days ago, works well. I went to back up my Macbook Pro on the external hard drive I have always used and it won't work, it just keeps saying preparing back up. It is a WD My Passport hard drive. I tried removing the hard drive and selecting it to use a a back up but still wouldn't work. It has worked fine every time before downloading Yosemite. Any suggestions would be greatly appreciated.

I know that no one has replied yet, but figured out the issue. I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store. They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive. When I got home, I thought I would try one more thing. I hooked it up to a powered hub and it works perfectly. I'm not sure why no one else thought of it, but glad that I did.

The Sims 3 won't work on my Macbook Pro

I just recently got a Macbook Pro that came with Lion installed already. When I tried to put Sims 3 into it, the computer didn't read the disk. Is there anything I can do to get Sims to work on my computer? Thanks

Is it a Mac disk? If not, it won't work unless you create a Windows partition, and install Windows through Boot Camp or an emulator like Parallels.

Power button and voice control buttons won't work on my macbook pro retina

I found that my power and voice control buttons won't work on my new Macbook pro retina. I can't shut it down or restart it in any way. And Im afraid if I force to shut it down I can't turn on it cuz the power button won't work. What should I do? Any idea???

Please read this whole message before doing anything.
Back up all data.
Quit Facetime and Messages if either is running.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following item from the Library folder to the Trash (either may not exist):
Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
Leave the Library folder open. Log out and log back in. Try the applications again. If they work now, stop here. Close the Library folder.
Step 2
If you still have problems, quit again. In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
com.apple.imdsmsrecordstore
com.apple.imservice
Move them all to the Trash. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash too.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again.

I have a wired keyboard which won't work with my MacBook Air unless I use the extension cable supplied with the apple keyboard. Is this normal or have I got a connection problem?

I Have an apple wired keyboard which suddenly won't work unless I use the apple ext cable supplied with the keyboard...used with the wire fixed into the keyboard it just won't respond. Do u think the keyboard is faulty. ? I want to use it with my MacBook Air and a big screen.

My best guess is that either there's a small deformation of the USB plug of your keyboard or some foreign matter (like lint) inside the keyboard plug. When I was setting up my new lab last year I had to use the extension cables and I found that the female end of the extension cable was considerably tighter than the computer's USB port. If an Apple store is nearby it would be worth taking the computer, keyboard, and extension just for piece of mind.

My Sims 3 game won't work on my macbook pro.

This message comes up when i try open it : "Cant open application Sims 3 in launcher." And then this: "-10810" Please try explaining this to me in an easy language, because i really wonder why **** won't work.This message comes up when i try open it : "Cant open application Sims 3 in launcher." And then this: "-10810" Please try explaining this to me in an easy language, because i really wonder why this won't work. I have tried reinstall it but it does not change anything, I have recently updated the game but i haven't had problems about this before. Why is this happening?

Morning Alison Mcshane,
Thanks for using Apple Support Communities.
The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs.
For more information on this, take a look at this article:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Best of luck,
Mario

My apple mail application won't work on my macbook, iPad, or iPhone.

About a week ago, my apple mail (aol and google accounts) stopped pulling. They won't work on any of my apple products. It keeps saying unknown error. It will add my contacts for google and calendar, but nothing for AOL.
I have erased my computer and reinstalled the new operating system thinking maybe something was missing (component wise) but it still won't work. I don't know what to do. Please help.

This is what I am seeing on my screen. It won't let me even add a google or AOL account. It keeps saying there is a connection error.

Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

Hi
The webcam is listed in device manager under the Imaging devices
There you should see USB Video Device.
If its not listed there, then I think that the device malfunctions or its disconnected.
The webcam is an usb device and its connected to USB controller.
I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
I such case the display lid needs to be disassembled and the cables should be checked.
In my opinion its a job for an technician.

Sound won't work when my MacBook is connected to my TV via HDMI

I have my MacBook connected to my HDTV via mini DVI to HDMI and the picture is perfect, but I cannot make the sound work. I've tried going to sound under system preferences but my tv is not listed as a device. Do you know how I can make the sound work?

You need an audio cable to connect your Mac's audio out port to your TV's audio in port. The minidisplayport does not send sound.

My webcam won't work on my macbook!

Similar Messages

Maybe you are looking for