My webpages w/ Jq mobile do not load in Ipad minis of all versions slow in other OS what can I do?

I went to Staples and tested my pages and the ones with DW Jq mobile embedded and working fine on computers does not load in Apple IPads, mini top of the line or the bottom of the line. THey laoaed quickly in Chrome books cheap versions, the MS surface they worked, and it works on my WIN. 8.1 but it is often slow, and my site takes sometime 15 secs to load, which is too long. SO I took them out and they load quickly. This is a big problem, and I do not know what is happening, Perhaps after 10 elements JQ must reload the entire page? MS FrontPage had this same problem, they fixed by server-side extensions but no longer supported them as the Bill Gates greedy partner has helped destroy MS, who is playing catch up. Any ideas? I like the mobile plattform, but maby tech is not there yet for all?

>I have connection only of a wifi 'n'
802.11N supports speeds up to 72mbps. That's not your problem. Are you sharing this network with others? What is your internet speed?
>I was forced to get DW as Front page pulled punches and promised sside extensions and then reneged
MS discontinued support for Front Page in 2006.
>this does not have anything to do with a rant
You are ranting. You're complaining about MS and Bill Gates' partner and how they screwed you and about a product that was discontinued 8 years ago. Calm down and stick to the facts about your problems.
> I cannot get here or load up. why?
If you are having problems getting to the forum or working with DW, then there is definitely something wrong with your PC. You mentioned getting logged out and redirected to ads - sounds like you have some malware.

Similar Messages

Iceberg reader will not load fully, it comes up with a blank white page. What can i do to read my books?

Iceberg reader will not load fully, it comes up with a blank white page. How am i ment tonread my books?
If not is there anyway i can get a refund to buy the books on ibooks?

Soapie wrote:
Iceberg reader will not load fully, it comes up with a blank white page. How am i ment tonread my books?
If not is there anyway i can get a refund to buy the books on ibooks?
The only Iceberg app I can find in the app store is a social networking app, not an e-reader. I don't see how you could buy books for it.
UPDATE: I see that it isn't available in the US app store. To contact the developer find it in your App Store and there will be a link to the developer's support site.

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

I have been referred to by ITunes support. I purchased ' the traverling Wiilburys' via my Ipad, it downloaded with no problem, and, via the cloud was installed on my PC. However, it will not load on my IPod. All software is current.

I purchased 'the traveling willerbys via an ipad, it download onto the ipad ok and via the cloud onto my PC. However, it will not load to my iPod. All software is current and I have deleted the iPod and reload all music and audio files, everything loads ok with the exception of the travelling willerbys!!!!,. Any help please.

Did you check here:
Go to the iTunes store on your computer > Purchased (in the quick links section on the right) > sign in > Music
If it is already on your computer it will say "Downloaded" otherwise it will have a cloud icon with an arrow in it. Click it to download.

In chrome browser says : "could not load adobe acrobat npapi plug-in version 10.1.4" whenever i ne

I have not been able to use chrome browser the last month for documents: display says : "could not load adobe acrobat npapi plug-in version 10.1.4"
I haven't been able to figure out how to fix this, does anyone know what i need to do

Go to chrome://plugins and enable chrome plugin 'Chrome PDF viewer'.
Regards,
Ravi.

Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified

Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 31: <compilation debug="true">
Line 32: <assemblies>
Line 33: <add assembly="Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89B483F429C47342" />
Line 34: <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
Line 35: <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
Source File: D:\AverySignatureBinders\httpsdocs\ASBNet\web.config Line: 33
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

For Adapter Pack 2013 the following Oracle Client(s) are needed:
Supported client versions: Oracle Data Access Components for Oracle Client 12.1, Oracle Data Access Components for Oracle Client 11.2.0.1
And please bear in mind that both the 32- and 64 bit versions are needed.
Morten la Cour

Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specif

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified..
Editing the web.config and adding dependentAssembly didnt worked for me.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi,
Please try to do as follows:
1. Check your farm solution whether reference the Microsoft.SharePoint.dll. Or try to add the Microsoft.SharePoint.dll into the bin folder.
2. Execute the iisreset command.
3. Create a new farm solution and check whether the issue still occurs or not.
Best Regards
Dennis Guo
TechNet Community Support

Has anyone seen this Dyld Error Message: Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto Reason: image not found

Getting this error on iPhoto open it refers to iLifeSlideShow and iPhoto quits - or doesn't open.
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found

Yes, some perople have seen this. Options:
1. Try reinstall iPhoto. (see below)
2. If you have access to another Mac with the same version of the OS, try and copy that framework over
3. Reinstall the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Regards
TD

Could not load Adobe Acrobat NPAPI plug-in version 10.1.3.

I could not load Adobe Acrobat NPAPI plug-in version 10.1.3. I have an Apple Mac OSX 10.6.8. Any ideas on what the problem could be?

What app is trying to load it?

Windows 7 does not load the ipad bluetooth drivers

I am trying to connect my ipad 2 to a windows 7 computer and the computer will not load the ipad blutooth drivers so a connection is never made.

Hi Phil,
It's funny that you say that Reflector runs on Wifi and not Bluetooth. I thought the same thing and that's why I was having a difficult time with getting this to work...on top of the bluetooth drivers not installing properly.
When you initially connct your iPad device to your computer through bluetooth, your PC installs bluetooth drivers...you can see this by the little notifictaion you get that says this. Setting up your device...installing drivers. So you can't tell me that there are no iPad bluetooth drivers.
You have to enable bluetooth on your ipad to get to the mirroring icon. (double tap your home button and scroll to the left. The mirroring icon should be visible and only visible if you have bluetooth turned on. Now if you run Reflector, then you should see the name of your PC that you shared through Reflector. Then you click on the mirroring app on your iPad and select the shared name on your PC and slide the mirroring toggle button to turn it on.
I have tested this on another laptop running Windows 7 and everything installed perfectly fine...even the bluetooth drivers.
So my conlusion is that it is the bluetooth drivers at fault here, since they didnt install properly. No matter how many times I remove the device and readd it, the bluetooth drivers do not install and I see red x's beside them.
Not sure what is keeping the drivers from being installed.
BTW...thanks for your reply Phil...see posting to this year old thread did me some good as you replied
cheers,
Tom

Could not load file or assembly 'Oracle.Web, Version=2.111.6.20

I am getting the following error whenever I try to run ANY .NET Web application. It looks like the ODP.NET installer pooched IIS.
Could not load file or assembly 'Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
I searched for and copied the C:\oraclexe\app\oracle\product\10.2.0\client_1\ASP.NET\bin\2.x\Oracle.Web.dll file into C:\Windows\assembly, but that didn't help.
TIA,
Miles

One thing might be if the web server has multiple versions of Oracle installed, then check to see which is first in the path. Another would be that at the least IIS would need to be restarted after the Oracle install, for the path to take effect, possibly the whole machine would need a re-boot for this.

Could not load file or assembly 'Oracle.DataAccess, Version=2.121.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.

Hi All,
While trying to access oracle database from SharePoint facing "Could not load file or assembly 'Oracle.DataAccess, Version=2.121.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified."
How to fix this issue? Thanks in advance!

Hi,
According to your post, my understanding is that you get error while access oracle database in SharePoint.
You can set “Enable 32-bit Applications” to true in the application pool for the web application, then check whether it works.
For more information:
https://www.learningpenguin.net/myblog/2014/02/03/could-not-load-file-or-assembly-oracle-dataaccess-or-one-of-its-dependencies-an-attempt-was-made-to-load-a-program-with-an-incorrect-format/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Could not load file or assembly 'Oracle.DataAccess, Version=2.111.6.20

I have visual Studio 2008 and ODAC installed on Winows 7, my VS2008 application retrieves data from Oracle Db 10g xe. I get this error report wih every attempt to connect and interact wih the database:
"Could not load file or assembly 'Oracle.DataAccess, Version=2.111.6.20,
Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies.
The system cannot find the file specified."
What could be the issue? The same code that worked on Vista is the one returning this error report.

I wonder if you could try the following command:
gacutil.exe /l Oracle.DataAccess
This should display the version number of the current assembly that it is GACed. In case that does not correspond to the version 2.111.6.20 then try:
gacutil.exe /u Oracle.DataAccess
and then find the path to the Oracle.DataAccess.dll assembly and issue the following command:
gacutil.exe /i {path}/Oracle.DataAccess.dll
The first command will display the version of the newly GACed assembly. If it still not what you are looking for please pass along the version that it is displayed.
In case the version will match 2.111.6.20, then retry to use VS2008 to connect to your Oracle DB.

Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20

I have a C# windows application that started to give me the error when I try to run it:
Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20.
I was adding and removing references and re-build when this started. The builds are successful Is there anything I can do to correct it? Other apps that I uses ODT are fine. The full error is below.
Thanks,
Kim
System.IO.FileLoadException was unhandled
Message="Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. Failed to grant minimum permission requests. (Exception from HRESULT: 0x80131417)"
Source="perdiem_snapshot"
FileName="Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342"
StackTrace:
at perdiem_snapshot.frmDataGrid..ctor()
at perdiem_snapshot.Program.Main()
at System.AppDomain.nExecuteAssembly(Assembly assembly, String[] args)
at System.Runtime.Hosting.ManifestRunner.Run(Boolean checkAptModel)
at System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly()
at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext, String[] activationCustomData)
at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()

Hi There,
Were you able to resolve the issue. I am getting the same kind of error , when i am trying to deploy the application on a handheld device (symbol Mc9000g).
Do let me know if you were able to resolve it.
I am getting below message.
Could not load type 'Oracle.DataAccess.Client.OracleConnection' from assembly 'Oracle.DataAccess, Version=10.1.0.400, Culture=neutral, PublicKeyToken=89B483F429C47342'.
Kiran
Message was edited by:
Kpatel

Could not load file or assembly 'Oracle.DataAccess, Version=4.112.4.0

Hello Everyone,
I am simply trying to insert into an oracle database table. When I try to run the insert from my visual studio program after a button is clicked the program stops and I get "Could not load file or assembly 'Oracle.DataAccess, Version=4.112.4.0" error.
Why is this? I have added the reference and put "using Oracle.DataAccess;" in the file. The code is below. Any suggestions?
OracleConnection Con = new OracleConnection(ConfigurationManager.ConnectionStrings["ConnectionString1"].ToString());
OracleCommand sqlCmd = new OracleCommand();
//OracleDataReader dr;
sqlCmd.Connection = Con;
Con.Open();
sqlCmd.CommandText = "INSERT INTO FGID values (0, 0, 0, ' ', sysdate)";
sqlCmd.ExecuteNonQuery();
sqlCmd.Clone();
MessageBox.Show("Record Inserted!");
M.N.

Hi Boa_nerges,
>>Could not load file or assembly 'Oracle.DataAccess, Version=4.112.4.0" error.
Whether all projects have the same issue?
Please make sure that it is not the platform target issue in your project property. Or the setup version issue.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/9827bb73-a58b-415d-ad93-8e08f3a1258b/need-urgent-help-could-not-load-file-or-assembly-39oracledataaccess-version411220?forum=csharpgeneral
http://forums.asp.net/t/1661229.aspx?How+to+change+assembely+reference+to+Oracle+DataAccess+in+prod+
In addition, if still no help, since the oracle is the third party tool, I suggest you post this issue to the Oracle forum:
https://community.oracle.com/community/database
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My webpages w/ Jq mobile do not load in Ipad minis of all versions slow in other OS what can I do?

Similar Messages

Maybe you are looking for