My Wi-Fi home network works, but the iPhone cannot connect to the network?
Let me clarify. I have a wifi home network that my laptop connects to and now also my iPhone. They both connect to it just fine and the internet works and everything. I just tried to setup the Remote app but my iPhone won't show up under Devices in iTunes. I know this is a problem with my network because I also tried setting up Home Sharing between my laptop and desktop computer but that won't work either. It's almost as if they're not on the same network because it can't seem to realize other devices are connected, but they are all connected to the same wifi network. My laptop is running windows 7. I have no idea what to do. Can you help please? Thanks!
Try the solution that worked for me at the end of this thread
http://discussions.apple.com/thread.jspa?threadID=2564699&tstart=0&start=60
Similar Messages
-
I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?
Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
My wifi shows a strong signal but then i cannot connect to the internet (safari or apps). what is wrong? internet is working fine on my laptop.
Is this a new issue with your iPad meaning that you have been able to connect to the Internet in the past?
If it worked before try rebooting your router - unplug it for about 30 seconds and then plug it in again.
Sometimes restarting the iPad is all it takes as well. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You can also reset Network Settings - go to Settings>General>Reset>Reset Network Settings.Or go to Settings>WiFi>tap the blue arrow next to your network>Forget this Network. In either of those cases, you will have to rejoin your WiFi network and enter your password again. -
I have factory restored my 1pad 3 loaded ios8 - wifi works, safari works but it won't connect to the app store or iTunes citing 'not connected to internet' any ideas?
Reset the iPad and try again. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons, let the iPad start up.
-
Emails are l "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server. TalkTalk (Tiscali) say there is no problem with their server because I have checked and can send emails with their webmail.
No that is not it:
Open Mail>Preferences>Accounts, the first page has this on it
If you click on the server name in the box (gmail in your case I assume) it opens and reveals this:
If you select Edit SMTP Server list you get this:
Post it here and, select the Advanced Tab (which looks like this)
Post this page as well. -
BPC Excel: The system cannot connect to the server. There might be network
Hi Guys,
I get the following error when i try to connect to BPC Excel: The system cannot connect to the server. There might be network or security issue.
This only happen on clients machines, I have installed the client tools on the server and tested, i can connect to Excel but not on the machine. My MS office version is the same as the one on the server. BPC is ver 5.04
Has anyone experienced the same problem.
your help will be greatly appreciated.Let me summarize your issue to see if I may help. If I cannot, then you will need to work with SAP Support on the connection problem.
- You have a single or multi-server setup?
- Installed using BPC 5.1 SP3, (or 5.0.502) correct?
- You can enter the BPC on the server, both via BPC Excel and BPC Admin?
- When you initiate BPC Admin on your client, so can connect to the Server and perform Admin operations?
- When you initiate BPC for Excel, and walk through the connection wizard, you cannot connect to the server?
- When you are in the Connection Wizard, are you using a path or a Server designation?
- Is the system on a single domain?
- When you added users to the Admin Security profile, they were selected from a DOMAIN?
- You have processed security and assigned ALL TASKS currently and processed the MEMBER ACCESS profiles, yes?
After all of this, have you uninstalled 1 BPC client, cleared the ProgramFiles/BPC folder, and deleted the local stored BPC information? If you haven't, just for simplification, I would attempt this process.
You also hae read all the SAP Support Notes regarding using Excel2007 with BPC and the issues you may experience?
Please let me know and maybe we can help. -
After upgrading to OS 10.8, my Mac App Store is not working. It says: Cannot Connect To The App Store. Kindly Help
Also having that problem - I checked and I am connected to internet (can access other websites or other pages in Apple's website), can login from Snow Leopard (10.6.8) with Mac App Store there, but if I use the (external) drive with ML to start up, no go.
I can get to the "Featured"/initial MAS page, and tried going to the login from there, but same problem as Mitoshacer.
In my case, MacBook Pro (2.66GHz, 8GB RAM, 500GB external with ML - vs. 320GB internal drive with 10.6.8), March/April 2009 model. Have done searches for the problem online, but nothing shows up (except some for older OS X versions). -
I'm trying to restore my iPhone, but get an error message 'the iPhone cannot be restored, the device cannot be found. How can I resolve this?
iOS: Unable to update or restore
-
The system cannot connect to the Application Server
Hello Everybody,
I have a problem when connecting to my BPC Application.
I get the following error when trying to open BPC:
"The system cannot connect to the (http://xxxxxx) Application Server. Verify that you have specified a valid Application server name, or see if the application server is unavailable at this time."
We have to reboot the application server to have acces again to the application.
The osoft website was also unavailable.
The server diagnosotic was OK.
And when consulting the tblLogs table I found this message:
==============[System Error Tracing]==============
[System Name] : ApplicationService [Message Type] : ErrorMessage [Job Name] : OSoft.Services.Webservice.ApplicationService.ApplicationService.Query() [DateTime] : 1/3/2011 4:27:35 PM [UserId] : GROUPE\Deshors [Exception] DetailMsg : {System.NullReferenceException: Object variable or With block variable not set. at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags) at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) at OSoft.Services.Webservice.ApplicationService.ApplicationService.ValidateUser() at OSoft.Services.Webservice.ApplicationService.ApplicationService.Query(String strQueryType, String strParameter, String strContext, String strSecurity)}
==============[System Error Tracing End ]==============
==============[System Error Tracing]==============
[System Name] : Configuration [Message Type] : ErrorMessage [Job Name] : ServerDefault.GetValue [DateTime] : 1/3/2011 4:40:08 PM [UserId] : [Exception] DetailMsg : {System.Exception: Cannot create ActiveX component. at Microsoft.VisualBasic.Interaction.CreateObject(String ProgId, String ServerName) at OSoft.Services.Application.Configuration.ServerDefault.GetValue(String strKeyId)}
==============[System Error Tracing End ]==============
Any help?
Thank you in advance.Hi expert,
Unfortunately, we still encounter the issue !!
We get Unhandled exceptions in the W3WP.EXE process, but the IIS logs do not show anything wrong.
Here is the Windows event warning message we get :
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/31/2011 11:43:11 AM
Event time (UTC): 1/31/2011 10:43:11 AM
Event ID: 0295c38777734029a3cec37ec035fa45
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/OSoft-1-129409441580590866
Trust level: Full
Application Virtual Path: /OSoft
Application Path: C:\PC_MS\Websrvr\Web\
*Machine name: **************
Process information:
Process ID: 4323
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: Exception
Exception message: Invalid UserID
Request information:
Request URL: http://localhost/Osoft/Launch.aspx
Request path: /Osoft/Launch.aspx
User host address: ::1
User:*******\Administrator
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 12
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)
at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
at OSoft.Consumers.ZFP.WebBase.Utility.GetLastUserApp(CPMUser& mUser, String strAppServerURL, String strSecurity, String strContext, Boolean bServerPathReset)
at OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at OSoft.Consumers.ZFP.WebBase.PageBase.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Thanks in advance for your help
Lionel -
The client cannot connect to the server
we just installed the boe but found that the client cannot connect to the server.
server: windows server 2008
boe xi3
client: window xp sp3
the server and client are in same dns
all components are work in server but client.
any idea on this?
ps: i can ping the server name successful.
thanks
ada
Edited by: Ada_Wei on Oct 29, 2010 10:12 AMCan you please try to stop and disable the Windows firewall service on your client machine?
WHich client do you use and which error message do you get exactly?
Regards,
Stratos -
The system cannot connect to the server
Hi Experts,
when I set BPC for Excel connection by connection wizard, I can connect to server and get application set list, but when I login application set, the system show me the message("The system cannot connect to the server"), and log off! how can I fix this problem? is it a firewall issue?
best regards
evansHi,
Can you compare your macro setting (Security level )compare to the system in which BPC is working. Or try as follows:
1. Unistall BPC
2. Restart system
3.Install BPC
hope it works...
regards,
Raju -
Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash -
Any other suggestions to resolve the error, "cannot connect to the itunes store" ?
Hi paul.labiche,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M. -
When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
When I go to the log files on the SharePoint server. I see the following error.
Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
I am guessing this has something to do with the UDCX connection and the database.
Can anyone help me get this fixed?Hi Jim,
Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
in the UDC file explicitly.
Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
http://support.microsoft.com/kb/981684
Thanks
Daniel Yang
TechNet Community Support -
I cannot connect to the iTunes store for any purpose. When I try I get the message: "Cannot connect to the iTunes Store". That is all. I have tried a lot of different things except , obviously, the correct thing.
HI ...
Try this support article > Can't connect to the iTunes Store
Maybe you are looking for
-
Hi, I'm sure there is a way to do this but I have no idea where to start! x
-
Using SYSDATE in Pre-Defined View Criteria ADF BC
I'm trying to setup a View Criteria to find records between two dates. So I create a View Criteria and Select my date field from the table and then choose the "Between" operator and then my operand is a Bind Variable. Then in my Bind variables I have
-
How to count the days between Date Range using OO ABAP?
hi experts, i want to count the days between Date Range using OO ABAP for that which class and method can i use?. Thanks, Mahesh.
-
Hi, We have two tableviews on a page and we created two different table view iterator classes for those two table views to make some columns of those table views editable. I am able to get the editable columns in the first table view and some how
-
Brother 3820CN does not show up in AEBS
Using the new AEBS I have two network/USB Brother printers. I have always used them with my D-Link router connected via Ethernet. Now that I am short one Ehternet connector for my purposes, I thought I could use the USB connection for the second prin