My Wi-Fi on my iPad suddenly quit working

It works on my MacBook. I have tried Resetting and turning off the iPad. Nothing works.

- Power off and then back on your router.
- What do yoo mean by:
" I reset the box and thru itunes"
- Have you reset the iPod. Nothing will be lost.
Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

Similar Messages

  • HT1766 My iPad speaker suddenly quit working, ear phones are ok, anything in setup for a fix

    My speaker suddenly quit working, ear phones are ok, is there a setting for this

    Plug/unplug the headphones from the iPad a few times. Also try rotating the plug in the socket a few times. The headphone jack has an internal switch which turns the speaker off when the headphones are plugged in. The contacts may have gotten dirty within the socket. Working the plug within the socket can sometimes get things working again.

  • My gmail desktop suddenly quit working on my iMac. Why? I am connected to the internet

    My gmail account suddenly quit working on my imac HELP! I can access the internet using safari just fine.

    You might want to post this question in the iPad forum as it is not related to iCloud.

  • The message function on my Ipad just quit working.  I was using it while in Mexico and it just quit.  I have come home and synced my Ipad with Itunes and function still does not work.  How do I get this function to work again?

    The message function on my Ipad just quit working.  I was using it while in Mexico and it just quit.  I have come home and synced my Ipad with Itunes and function still does not work.  How do I get this function to work again?

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • My iPod touch 5 suddenly quit working and it won't charge.

    My 5th Generation iPod touch suddenly quit working. I try to charge it and nothing happens.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HP Deskjet F4140 Suddenly Quit Working

    Hello, I have an HP Deskjet F4140 connected to my iMac that suddenly quit working. The iMac doesn't even detect a a printer connected. I have updated my BIOs, uninstalled and reinstalled the printer drivers, etc. It worked fine last week. The only update I have made since then was an automatic update of the EEI Firmware. Any help?

    The Apple updates messed with my HP C4280. I had to uninstall-delete then hunt down all HP files (preferences etc) using Spotlight and delete. Then restart and download and install the drivers again. After all of this it worked properly. Good luck.

  • Dictation suddenly quit working on my iPhone

    dictation suddenly quit working on my iPhone. Help

    I had the same problem, dictation suddenly stoped working on my new IPhone 5.
    I tried the fix from Linda Swenberg and it worked.
    Turn Off SERI in General settings
    Power down the phone ( press and hold the on/off buttton)
    Turn it back on
    Turn SERI back on
    Wait 3 minutes
    It then worked
    Thanks Linda

  • Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner sti

    hi

    Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to  Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
    I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
    Could someone please help? It'd be VERY much appreciated.

  • Image Processor suddenly quit working, CS3, OS X Yosemite.

    I use Image Processor from Bridge all the time to run actions on folders of photos. Suddenly, it just quit working. Photoshop opens, but the dialogue box never appears so nothing happens. Help!

    Have you looked at System Preferences/Trackpad to make sure it is set up?

  • Ipad suddenly stopped working

    ipad suddenly will not turn on.  Is there a way to restart it?  It is fully charged

    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    If no joy...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • My mousepad suddenly quit working

    My mouse pad quit working suddenly. It appears to be mechanically, as in the pad doesn;t seem to be going down to select. Any way to repair or free it up?

    It could be the battery causing this.
    Take your Mac to an Apple Store or Apple certified repair shop.

  • My ipad just quit working.

    My ipad glitched and just quit working and will not turn on now. Even if I hold down on/off+home buttons together. Any ideas?

    Whoa !!
    Try:
    1) Restart: To restart (reboot) Press and Hold the Home and Power buttons until the Apple Logo appears, about 10 seconds.
    2) If that doesn't fix it, with the iPad connected to the computer, try a restore from within itunes on the sync computer.
    3) If that still doesn't fix it, and you are near an apple store, make an appointment with the Genius Bar and see if they can get it going for you.
    http://www.apple.com/retail/storelist/

  • Time Capsule--Wireless suddenly quit working

    My Time Capsule had always worked perfectly, but suddenly my wireless access from any device has quit working. My DSL is working fine, and the router and backup portions of the TC seem to be working. I tried a hard reset, updating to the latest version of Airport Utility and Firmware, and it still doesn't work. My laptop sees the network, but when I type in the password and try to connect, I get a connection time out.
    Is there anything else to try, or do I assume it's broken?

    Do a factory reset.. if the TC still will not pass IP addresses it is indeed faulty.. I get the idea it has swapped modes for some unknown reason. Anyway give it a try.. no luck and Apple will replace it.

  • In FCP7 my share option suddenly quit working, and I can't submit in compressor either.  Any suggestions for a solution?

    I have had FCP 7 installed on my Mac Pro since May 2011, It has worked flawlessly up until a couple weeks ago.  The "share" option has quit working on me.  Also, I am unable submit any jobs in compressor, the button is greyed out.  This has come entirely out of the blue and I'm stumped as to the best course of action.  Any suggestions?
    Thank you for your time.
    Justin

    Thanks for the reply,  I actually used the digitalrebellion.com FCS Remover and reinstalled compressor and Qmaster and everything seems to be working properly again.
    Thanks again for your reply

  • Messages and facetime all of a sudden quit working

    (icloud) imessage and facetime all of a sudden stopped working and advice to how to get it working again?

    I had the same problem too. For some reason the phone settings turned them off. For iMessage you have to go to Settings>iMessage and turn it back on. Same for FaceTime, go to Settings>Facetime and turn it back on. Don't know why some peoples stayed on and others, like ours, turned off. Hope this helps

Maybe you are looking for

  • Windows 2008 update error 80072EE5

    Im trying to update my windows server 2008. Im getting the error 80072EE5.  Not sure why. I have an sbs 2003 server that is the main server, it has wsus on it. But it's not setup to distribute updates yet. I've searched this error but nothing comes u

  • OS error code 11000

    Hello, I have installed Max DB 7.6.03.16 on AIX 5.3, however when trying to create a database I receive following message: -24994 Runtime environment error (db_admin -f); 1, Check knldiag! Kernel exited with '0' before reaching ADMIN state (OS error

  • In iMovie 10.0.2 Why can't I find iMovie projects or events to transfer to external harddrive?

    I am trying to backup my iMovie Projects and all of the media for a number of events. I have been having trouble with iMovie 10.0.2, but it could also be my computer. I am running a Mid 2010 MacBook Pro with Maverick. I have a MacMini that I would li

  • How to Use Dimension Operator

    Hi I'm trying to implement SCD Type 2. I have done so using conventional methods. I have read in some blogs that dimension operator can be used for SCD. Can any one provide me material on how to use Dimension Operator. I tried OWB User guide. But its

  • File adapter @ receiver end using fieldFixedLengths

    Hi , I am using file adapter @ receiver end using content conversion. Using field separator as 'nl'. When i open file in Hex mode it's showing the field separator as 2 Cariage returns(CR) & 1 line feed(LF). But the requirement is only 1 CR n 1 LF .