My widows7  does not start, when i open it hangs on windows logo. I have to restore by the windows 7 cd everytime.

When try restore same problems happens. After 14 to 15 of ******** cd down then restarting, it restores.

First you are in the wrong forum however because you don't say how Win 7 is installed I can't direct you to the correct forum. It is probably installed with Boot Camp, Parallels or Fusion. If you are using Boot Camp there is a forum here for that. If you use Parallels or Fusion both manufacturers have forums  you can post on.

Similar Messages

  • HT5781 Occasionally does not start when I open or press the on switch

    Sometimes I appear to have no power and blank screen when i open my macbookair, and nothing happens when i press the power switch.. any suggestions?

    open from what,    off , or from sleep mode?
    SMC reset and verify again
    SMC reset
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    if same contact Apple for appt for free diagnostic evaluation of your Air.

  • When I open a link in gmail the website opens as a completely black page and when I click anywhere in the page the whole thing turns white and there is nothing showing. This does not happen when I open the same link in IE

    When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
    == URL of affected sites ==
    http://all

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

    I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

    You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite.  It is not listed on their system requirement website:
    Mac OS X 10.9 Mavericks
    Mac OS X 10.8 Mountain Lion
    Mac OS X 10.7 Lion
    Mac OS X 10.6 Snow Leopard*
    Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
    Only case insensitive file-system volumes are supported.
    http://www.graphisoft.com/support/system_requirements/archicad17.html

  • Outlook 2010 -Mailbox Cleanup wizard does not start when using cached mode

    We are using Outlook 2010 with Exchange 2003 server.
    Currently all users are using online mode, but for some problem, I need to persuade the users to change to use cached mode.
    Recently we find that when user
    mailbox reaches its size limit and try to send an email message in Outlook 2010 that is in cached mode, the email message stays in the
    Outbox and the Mailbox Cleanup wizard does not start. It just prompts
    for "send and receive error". As most of the user would not look for what the error is referring and just call IT to fix. Even worst is, they didn't realize that the mail is still in outbox.
    I find the KB2544027 describing this issue but was not available and suggest to install 2596485.
    http://support.microsoft.com/kb/2544027/en-us
    I've try to install the hotfix and install Office 2010 SP2 but just doesn't work.
    Does anyone know how can I fix it?
    Thanks!

    Hi,
    Based on my research from the internal resource, this issue has been fixed in build 14.0.6126.5000 or less. I suppose that the hotfix not available because it has been involved in the release.
    I’d like to confirm your Office 2010 build number so that we can conduct a deeper analysis on this issue.
    In addition, make sure you have installed the latest update for Office 2010.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • ITunes does not start when I plug in my iphone after I upgraded to Lion?

    iTunes does not start when I plug in my iphone after I upgraded to Lion? It worked fine prior to upgrading.

    http://support.apple.com/kb/TS1538

  • ITunes does not start when iPhone plugs in

    my itune does not start when I plug my iphone or ipad in , this stater with lion install

    Please see here if it helps:
    https://discussions.apple.com/message/15705708#15705708
    Regards, Michael

  • My airport does not start when pligged in

    My aipport does not start when plugged in.  The light does not come on at all.  If there some kind of a reset switch?

    With no light at all, unfortunately it is likely that an internal component in the AirPort Express has failed.
    The reset switch is next to the audio jack. Try a different AC socket. With the AirPort Express plugged into power, hold in the reset button for 8-10 seconds, then release.
    If successful, the AirPort Express will restart to a solid amber light for 30-35 seconds, then begin to slowly blink amber after 40-45 seconds.
    If you try the reset a few times with no success, I'm afraid that the AirPort Express  has failed and will need to be replaced.

  • HT1399 Hi! The "chapter" menu does not appear when I open a book in itunes. How can I make it appear?

    Hi! The "chapter" menu does not appear when I open a book in itunes. How can I make it appear? In fact, one time it did appear, but it seems to have been more of an incident.

    Books are meant to be read on your Devices through iBook App and will not work on iTunes.

  • PC does not start when pressing the power button, After that starts automatically like a ghost!

    I have HP Pavilion a6030in, My pc does not start when i press ther power button, but it starts after sometime automatically after that it works fine.
    Again when i shutdown and leave it for sometime, and still the problem is unsolved.
    Please Help
    This question was solved.
    View Solution.

    he figured out you dont just shut the lid and walk away, you use Windows shutdown
    click Kudos to say thanks if I helped

  • Hello, the "sign" feature does not show when i open a pdf document with reader (MAC)

    Hello, the "sign" feature does not show when i open a pdf document with reader (MAC)

    Hi mentane,
    Thank you for posting on the Adobe forums, what is the version of Adobe Reader you are working with.
    Open Adobe Reader>Adobe Reader>about Adobe Reader.
    Thanks,
    Vikrantt Singh

  • Hey software does not respond when I open a new file or an existing file

    Hey software does not respond when I open a new file or an existing file

    Nobody can tell you anything without system info and other technical details.
    Mylenium

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

  • On updating to Yosemite Mail Index damaged but does not  repair when re-opening mail.

    Yosemite updated but Mail index damaged and does not repair when re-opened. How is this fixed?

    I have the same thing happening.  Everything else seems to be working fine, except i can't open my mac mail at all!  it seems to be in a loop and won't let me retrieve any mail or even try to send mail before migrating, but it fails and then its back to the beginning and the same loop continues, so no mac mail working.  I also came from 10.6.8 to 10.10
    jane

  • HT201210 iphone 4s stopped in middle of update (via wireless).  apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id

    iphone 4s stopped in middle of update (via wireless).  apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id and usb picture are frozen on screen. Anyonw know what to do? 

    Hello Maxayla,
    It sounds like you are getting error code 1 when you were attempting a restore. I would use these troubleshooting steps from the following article which mentions that error code:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#1
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

Maybe you are looking for