My wife's titanium powerbook g4 won't connect via ethernet

My wife's g4 titanium powerbook (running 10.5.4) won't connect to the internet in my work apartment via the ethernet cable (only choice). The ip address keeps coming up 169.254.240.149 That usually means that the ethernet card is bad. maybe the driver is just bad. does anyone know how to reinstall the driver for this computer?

My wife's g4 titanium powerbook (running 10.5.4) won't connect to the internet in my work apartment via the ethernet cable (only choice). The ip address keeps coming up 169.254.240.149 That usually means that the ethernet card is bad. maybe the driver is just bad. does anyone know how to reinstall the driver for this computer?

Similar Messages

  • Powerbook G4 can't connect via ethernet but connects via airport

    We have a small office network connected to an Efficient Networks DSL router that's managed by our isp. The router has 4 ports and a linksys 8 port switch is connected to one of those ports. Another D-Link wireless router/switch is connected to another port.
    2 i-macs connect without problem via ethernet cable. They are set to DHCP and get 192.xx private addresses. Both run 10.4.5. Another older imac running 9.2.2. also has no problems.
    I recently purchased a powerbook G4 and it will not connect via ethernet to the Efficient networks router. At first it was connected to the linksys, so decided to connect it direct to the Efficient Networks router. With DHCP, it acquires a 169. internet address which is self generated (i.e. no real connection). I tried to give it a static private address (talking to the isp provider). They could see the powerbook but saw all zero's (presumable mac address). By the way the Powerbook works perfectly at home connected via ethernet cable to a D-Link router connected to a cable modem so it's not a physical problem. I even checked the ethernet cable I used in the office with another computer - no problem.
    When I switch to airport in the office, the powerbook connects to the network and the internet. I get some strange warning messages showing the server's and the router's private ip addresses. I click ok, and the powerbook finds an unassigned private ip address. It's the only way it will work, but it causes problems, because I can't connect to one of the network printers. Speed also isn't great.
    Can anyone give me advise how to proceed. I am no expert on this stuff so keep it as simple as possible.
    Tks

    Tim,
    Thanks for your help. Here's what I've done before reading your e-mail. The D-Link DI-524 wireless router is connected to the Effiicent Neworks DSL router as you mentioned. One ethernet port of the EFF.Net. router is connected to the WAN port of the DI-514.
    Because I have a D-Link router at home which works flawlessly with my powerbook, I decided to connect the ethernet cable of the powerbook to the D-Link which has 4 ethernet ports. Lo and behold, the powerbook acquired a private ip address and connected to the LAN and internet!
    When I connected the powerbook direct to the Efficient Networks router, it could not communicate. I believe that there must be some software incompatibility between the powerbook and the Efficient Networks router. By connecting to the D-Link, the D-Link assigned an ip address to the powerbook, and it could connect to the server, lan, etc..
    Only problem is that I have a Brother network printer that cannot connect to the powerbook. My powerbook cannot find it on the network. Because there is a linksys switch connected to the efficient networks router's third ethernet port, maybe as you said, going through the D-Link via DHCP (when the Linksys is also acting as a DHCP server, might cause this type of problem. What do you think?
    As a final note, other imac G5's connected to the linksys switch (which then connects to the Efficient Network's router) have no problem connecting to the lan or internet and have no problem connecting to any of the printers. When I put the powerbook on that switch, I could not connect to the internet - i.e. whether connecting via the lynksys switch or direct with the efficient networks router - same results: no internet connection whether manually or via DHCP.
    So the imac G5 has no problem with the efficient networks router but the powerbook G4 hits a brick wall. The G4 likes the D-Link router. I am concerned (and I will have to check this) that if I turn off the dhcp server feature from the D-Link, that whatever software issue crops up between the powerbook and the Efficient Networks router, will rise up again, because the D-Link will act like a simple switch (just like my linksys switch), and we'll be back to square zero. In any case, no harm in trying. This may be the cause of the Powerbook not seeing that Brother printer (even though it sees another printer and other macs).
    Having spent hours reading about network problems, I think it's safe to say that macs have problems with certain routers. Why a G5 works and a powerbook G4 doesn't is beyond me, but clearly software must play a role.

  • Airport extreme won't connect via Ethernet to BT homeHub v2.0

    Hi
    here's what I want to do:
    1. Homehub is connected to the phoneline and will provide a b/g network for my iphone/xbox/laptop1
    2. I want to connect my airport extreme to this (from what I can tell this must be done through an ethernet cable) so that I can have a separate N network which only 1 laptop will connect to.
    So the problem I have is that no matter what options I select in the airport extreme when it's connected via ethernet it tells me that nothing is connected to the Ethernet WAN port. I've tried two different cables different ports on the back of the hub etc. nothing works. Every time I search google or forums for an answer people just write "connected it via ethernet and it works great" but there's no guide to what settings to use that I can see.
    Can someone please help me with some sort of noob guide to get this setup how I've stated?
    Many thanks in advance

    Hey Bob
    thanks fro the quick response. I have actually tried exactly that but it still flashes orange at me I'm suspicious that the AE may have a fault because during the setup (i can't remember the exact steps) but I got the AE updated and it complained that it could read from the AE (error code was 10057). Googling this does thow up a couple of solutions which I haven't tried.
    so my steps should be:
    Factory Reset the AE
    setup as join existing network
    join via ethernet to create a 2nd network
    connect up the cable to the WAN port and the Lan of the Hub
    change to bridge mode.
    One thing I did notice (which may or may not be related) is the subnet mask on the AE says 255.255.0.0 when I set it up like this. However when I make it just join the network without trying to create a new one (which works) it sets it to 255.255.255.0 . the IP address also begins 192.168.1.* whereas in the other setup mode it is something different. Does that matter at all?
    Thanks
    Alan

  • We have an old titanium PowerBook that will not connect to our AirPort Extreme network. What gives.

    We have an old titanium PowerBook that will easily connect to any WiFi cafe or hotel network, but will not connect to our AirPort Extreme network. What gives.
    When the Apple Tec. installed our network for our 3 iMAXs, he couldn't it to connect either. Of course our two iPads have no trouble connecting.
    We are also having trouble getting it to upgrade from OS 10.5.8 to 10.6, even though I have a Snow Leopard up date family pack.

    What is your Wireless Security setting on the network?  Since you are running Leopard, I may not have the desired answer, but some of the Airport-equipped laptops, like the TiBooks, are said not to support all of the settings.  I have an AE network which supports b and g, with "WPA2 Personal" settings and the TiBooks connect with that one OK with 811.b Airport.
    Oh, and no way to upgrade beyond 10.5.8 Leopard for PPC machines like the Titanium G4 Powerbooks, as 10.6 and above require Intel processors.
    EDIT: I didn't notice this, but the TiBooks may be connecting with WPA encryption on my network, as I have the following display on my settings:

  • My wifi has an x and won't connect

    my wifi has an x and won't connect

    If it don't take your password, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • New iMac 5k won't connect using ethernet

    I was in the process of transferring VMWare/Windows from my MacPro to my new 5k iMac. With VMWare help I started transferring a 25 GB file and noticed it was going to take quite a while wirelessly, so I connected both macs to my Actiontec modem/ router. The MacPro connected effortlessly, but the new iMac won't properly connect. In the Network box it says "Ethernet has a self assigned IP address and will not be able to connect to the internet". The connection shows a yellow dot. I tried manually assigning 192.168.1.6 (from the Actiontec log on page) and the Network page says connected (dot turns green), yet when I turn off wifi there is no connection. I've tried other options such as "using DCHP with manual address", but am unable to connect via ethernet cable.
    A few days ago, when working with Apple support, I believe we did use ethernet successfully. Thoughts?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • HT204387 My iphone4 and my iPad mini won't connect via blue tooth just continues to search

    My iphone4 and my iPad mini won't connect via blue tooth just continues to search

    What are you trying to do?
    The Bluetooth is meant for earplug, headset, keyboard, car hands-free set, and speakers.
    You need a 3rd party app to do BT file transfer or other functions between iDevices.

  • I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via bluetooth whenever I try even though both shows that the devices are discoverable. I need help!

    I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via Bluetooth whenever I try even though both shows that the devices are discoverable. I also tried connecting them with my Bluetooth enabled laptop but it also didn't worked. Because of the Bluetooth not working I also can't enable airdrop.

    What model iPad?
    What model computer and OS version>
    AirDrop requires:
    What you need
    To share content with AirDrop, both people need one of these devices using iOS 7 or later, or a Mac with OS X Yosemite:
    iPhone 5 or later
    iPad (4th generation or later)
    iPad mini
    iPod touch (5th generation)
    You also need to turn on Wi-Fi and Bluetooth. If you want to share with your contacts, sign in to your iCloud account.
    Learn more about using AirDrop to share with people using a Mac with Yosemite.
    Use AirDrop to wirelessly share content - Apple Support
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
    To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    *The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
    For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
    Otherwise you need an app to pair via BT one iOS device to another iOS device. There may be apps that allow pairing with a Mac computer. The iOS devioces do not have the BT profiles necessary natively to pair with a computer or another iOS device except for AirDrop

  • Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

    I am a big fan of both the Airport Extreme and Airport Express.  In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters.  We have a good quality wired Cat5e ethernet network extended between the buildings and offices now.  Is this possible and does it seem like a good practical solution?  I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas. 

    Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
    Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

  • HT4356 Can I use a 'pc' network printer connected via ethernet to the home wifi network ?

    Can I use a 'pc' network printer connected via ethernet to the home wifi network ?
    or must the printer I want to use also have a wifi connection ?
    I have a home network using ethernet connected devices to a router, also attached to th erouter is a WiFi unit. We are using the WiFi unit to connect to the network and hence to the big wide WWW.  We now want to print from our IPads pereferable to our netowk connected HP Officejet Pro 8500 A909a series. (not the wireless model).
    I was using the HP ePrint app to print from the Ipad, but I do not fully understand how this works. It seems that you must use the app to do the printing which is fine for basic email and photos, but I can not access the drawing package I have, and want to print from it. Please what is it that I do not understand.

    You must use an airprint printer directly connected to wifi through it's own wifi card.
    See here for info:
    http://support.apple.com/kb/ht4356

  • Officejet 6500A Plus E 710n. Can I connect Via Ethernet & WIFI SIMULTEANOUSLY?

    Officejet 6500A Plus w/ Windows XP on Desktop, Windows7 on Laptop. Can I connect Via Ethernet & WIFI SIMULTEANOUSLY?

    No.  You can have one or the other.  How the printer connects does not have to match how the computers connect.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Connecting via ethernet ports on an AEBS that is extending a wifi network

    I tried to get this out on the subject heading (trust me guys I searched the forums first but I couldn't quite find this issue)...
    I have a Airport Express connected via ethernet to a network. I am trying to use an AEBS to capture that connection and then share it via ethernet ports (LAN?) to a PC that has no wifi card.
    I setup the AEBS to extend the existing airport express wifi and that worked fine and I can connect to it fine via wifi on my laptop. But the pc that is plugged into the AEBS via ethernet is not able to connect.
    Thoughts?

    In order to enable the Ethernet ports on the 4G Extreme for the Mac Pro, both AirPorts need to be configured for an extended network. Please read through the steps provided in the link to see if you may have missed any steps.

  • Wifi on Ipad and Iphone won't connect

    I have an iphone 4s and an ipad mini, both updated to iOS 7 and they both will not connect to wifi. They will connect when I am at home or at Starbucks etc., but not while I am at school. My phone did connect at school last year, but has not been able to connect this year. They will both say that I am connected, but when I go to use the internet it says I am not, even though it shows I am. The tech guys at my school have not been able to figure it out. Any ideas?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netwhttp://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-wonhttp://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bughttp://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading-http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asphttp://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxEhttp://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Macbook Pro won't connect via DVI

    Hello all,
    My Macbook Pro suddenly won't connect to any monitor using a DVI connection. If I use a VGA monitor (via my DVI to VGA connector), everything is dandy, but connecting directly to a (i.e.) Samsung or an Apple Monitor via DVI, the OS just blinks once (like if there is a connection), but the display is not being detected and is not turned on. I tried to delete all display preferences and I've zapped the PRAM without any result.
    Before I send the powerbook in for repair (my fear is that it's the DVI-connector that's broken), I just wanted to see if there's anybody out there who have had similar problems, that perhaps could be solved via software (i.e. the system)...
    Cheers,
    Massimo

    I am having the same problem as the rest on this thread. My VGA works fine in most cases, but my DVI will not work with any amount of prodding. Also, I have been trying to make use of matrox dualhead2go's and triplehead2go's, but these will not function correctly unfortunately. I got the whole logic board replaced a year after I got this laptop because it had strange display issues (the old red/blue square problem) but I'm far out of warranty now.
    I am a student and a video artist requiring use of multiple projectors for my final mfa thesis project..but this is really going to mess up my plans if there isn't a free/cheap fix..anyone have suggestions for speaking with tech support/customer relations?

  • I have no Internet connection(via ethernet or wifi) since I upgrade it to Yosemite.what is wrong?should I go back to Mavericks?

    Hello!
    I have a Mac mini and I just installed the Yosemite upgrade system and since then I can't connect to the internet anymore. I was using my computer also as a router for my home, abd after the upgrade my computer can't connect to the internet. It appears as it is connected to ethernet but no page can be load, and it appears the message that: this page cannot be displayed as the computer is offline. Why?? what means is offline?? And I also put the internet cable to my laptop and I share the internet, to see if it sees the wifi and the mac mini connected to the wifi but still can't connect to the internet, showing the same message as above.
    So far I didn't see other problems with the new upgrads, I like the new look, but I believe is moving a bit slower and it takes too much to launch after I restart it.
    My question is should I go back to Mavericks or anyone can help me with my problem?? I did reinstall 2 times the system
    already and I check in disk utility couple of times...same problem, no Internet...or better say, "my computer is offline", as it says in safari window.
    I really need help pleeeeeeease as I work from home and all my work is on that Mac Mini!!! And I need to downgrade to Mavericks can u please tell me how
    to?!!
    Thank you very much!
    Sandra

    Hi,
    You need to sign in when using Photoshop Elements 12 as it is the method of activation. If you sign out it deactivates that installation.
    If you are having problems, see if the following helps.
    Sign in, activation, or connection errors | CS5.5 and later
    Good luck
    Brian

Maybe you are looking for