My Wifi connection is fine and will connect to safari, but my apps wont connect, they say no internet connection, please help me
Using my wifi, i can connect to safari fine, but my apps like; twitter, youtube, facebook and other apps that require internet connecton wont connect at all, i have tried resetting my network but that has not helped, please help me!
go to settings date and time then set automatically ;D
hope this helped you
Similar Messages
-
My "Shop Local" app won't open, says; Checking internet connection
I downloaded the app; "Shop Local" and it all went fine, but when I tap "ok" it says "checking internet connection". All of my other apps work, fine no problem. How can I get this to work??
I tried deleting it but it reloads from the cloud and I guess I can't start from fresh.Is this the app? https://itunes.apple.com/us/app/shop-local/id475372575?mt8
I notice that it was released in Nov. of 2011 and has never been updated (appears to have been designed for iOS 3), plus has a fair number of negative reveiws. The support site appears to be a dead end. If this is the app, I'd recommend deleting it and finding another one. -
My I pod touch is saying to connect to i tunes, I have connected it and press restore, it says it cannot restore as not connected to the internet but I am connected as I can get on other websites, help!!
Hello calthelly,
Thank you for providing all the information about the issue you are experiencing with iTunes. I found an article that addresses the specific error, "iTunes could not contact the iPod software update server because you are not connected to the Internet. Make sure your Internet connection is active and try again:"
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My computer says that i'm connected to the wifi but I have an alert that says no internet connection
no internet connection
This means you're connected to the signal that your router is sending, however your router isn't connected to or sending out the wifi. You should read the user manual to indicate what the blinking lights indicate
or you can reset your router wtih it plugged into the modem and then setup the wireless connection in it.
you could also try turning on and turning off the modem and then turning off and then turning on the router before you reset it.
hope this helps -
Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
RogerHi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected] -
Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.
I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly... -
My iMessage doesn't work, and I keep getting a message saying I've lost Internet connection(when really my wifi is just fine) and it won't sign me in. Help?
Thank you soo much ! Every now and then I would check my DNS and it would say 8.8.8.8 but I just checked now and realised it was somethin something something THANK YUU SOO MUCH ! REALLY APPRECIATE IT AND YU DESERVE THOSE 49,085 points !!!
-
i have an iphone 4.my wifi was working fine on ios 6.1.3.but since i upgraded to ios 7 ,the wifi randomy disconnects,then connects ,then disconnects again and again???
Try going to settings/general/reset/reset network settings and do that
-
time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!
Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??
-
my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on
Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9 -
I just purchased an Novella MiFi ~ I have an Ipad 2 wifi only. My ipad will recognize the device, but when I try to connect, is says I am not connected. Suggestion?
Getting connected to a mifi the first time was goofy for me as well. The message you are getting means you have not satisfied the security on the my yet.
On mine, when I set it up, I had to declare a password. But it never recognized that password for connecting devices. Turns out the password was only used for changing system settings. When connecting a device what it really wanted was the device code, similar to a router key- not your password. So look through the paperwork and find the key, and try that.
I think you mean novatel, who make a number of mifi units. -
Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!
... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that. -
My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection
As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues. -
my phone keep asking me to sign in to iTunes store and will not allow me to download apps. it sends a message saying "Cannot connect to itunes store" what do i do?
Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it. So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID). If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections. -
MacBook Pro (OS X 10.9.1) calendar continues to "connect to server" and will not allow shut down or restart. Force quit worked. How can I make this calendar usable? The problem began after I updated to Maverick.
babowa, it seems like it is using Fuse & NTFS, so I don't think it's the classic WD + 10.9 mess, but extra WD tools & drivers can still break things MtTran.
MrTran, if you must use unsupported disk formats on your Mac you must also consider actually paying the developers that made the trial software.
It's probably a good idea to follow the developers removal instructions, reboot & then install one tool at a time.
MacFuse, FuseOSX, NTFS-3G are all likley to confict if you run older versions so you need to be sure you are using the latest version. I can't remeber which one depends on the other, so you will need to read the manuals.
When the disk is readable copy the data to another disk. You could probably do this from a Linux distro or Windows if OS X won't do it.
If you insist on only using the trial versions you will need to reinstall Mac OS, copy data off this disk & reformat it.
Is there any good reason for not using the Mac HFS extended format?
Maybe you are looking for
-
DVD burner doesn't burn CD or DVD
Laptop is an HP Pavilion dv6700 CTO Entertainment . I have been attempting to create a data DVD. When I attempt to burn the DVD with Power2Go, it goes through the process, but nothing is burned to the disc and the disc appears empty after the burn
-
How can you tell how much hard drive disk memory is available?
How do you check to see how much hard drive memory you have left?
-
Hello Everybody, This may be simple for most, but I just need a little direction on how do duplicate this effect. Take a look at the Tab Improvements video at 7 seconds in: http://www.lynda.com/home/DisplayCourse.aspx?lpk2=54993 The lower third start
-
Please I need some tips of video editing.
Hi! My name is Bruno Rauch, i'm brazilian and I need some tips for video editing.. Here below I'm going to put a link of two videos that I had made days ago...And I'm very grateful if you guys could see and tell me some tips to encrease my video qual
-
MB2320 - Scanning multi-page documents and saving as a single, page-consecutive PDF
I just purchased and set up a Maxify MB2320 to replace my PIXMA MX892, which fell victim to the dreaded "Incorrect Printer Head - U062 Error." My only disappointment thus far is the replacement of "MP Navigator" with "Canon Quick Toolbox" and the una