My wifi is fully connected but my web pages haven't loaded in two days... What do I do?

Wifi is connected fine but my web pages don't load

Power Cycle
Power off the router. Unplug it from the wall. Wait for few minutes.
Connect the router back to to the wall.
Power the router back on. Wait until all lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/HT1455

Similar Messages

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I'm having similar issues with my phone. I got my first iPhone recently, only had an iPod touch gen4 for a little over a year. Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas. When I got home on the evening of January 11, my phone would not connect the router anymore. I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting. That laste for a few minutes and then wouldn't work anymore. I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router. When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there. Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
Hope Apple fixes this problem soon..............

Why does it say my wifi is connected but the web page doesn't open?

I would be using the internet for an hour and then it disconnects but says it's still connected. I would have to turn the wifi off and turn it back on then reconnect for it to work. Should I make a genius bar appointment?

It's pretty tough to help if you don't provide any informaton about your system. Please complete your profile so we know the version of OS X and which iMac you have. Try some basics such as resetting your modem and router. Those two are frequent causes of issues.

My airport says i have an internet connection but no web page opens!!help!

I recently unplugged my imac and brought it to a friends to use. I used his wireless to surf the internet no problem. Now A few days later, I brought my computer back home and plugged everything in, I double clicked on safari and when it opened there was no website and I recieved the classic error "You are not connected to the internet." But the funny thing is My wireless says im connected. My airport has full bars, i have full service, so i would think websites would be working, BUT THERE NOT! I tried everything as well (Network diagnostics, Resetting safari, etc.) But nothing seems to work. Do you think its my Mac or maybe a problem that i need to address with my internet provider? Thank you to anyone in advance who helps...PLEASE HELP! I have an MAC OS X 10.5.8..2.66GHz Intel core 2 duo 4 GB 1067 Mhz DDR3

Airport may have 4 bars however all that indicates is you have a Wi-Fi signal it does not mean you have an Internet connection though. You may have an issue with your modem, easiest thing to do is power cycle your router and modem then retry.
Roger

IMac with 10.6. Firefox opens but does web pages will not load. It just "thinks" indefinately. Can't think what may have caused, just stopped working one day

Safari works fine. Have reset, reinstalled, disabled ad-ons. Am coming up with blanks on the support site.

https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating
If you are using a third-party firewall, you might want to check that. Other security software can also cause problems with an updated version of Firefox.

I have wi fi but cannot connect to any web pages

I am having trouble connecting to the internet. I have the i pad 2 and all was fine with the internet up an till now, i have full wi fi signal but am unable to connect to any web pages, ive tried reseting network settings. My other computers in the home are connecting ok so thats why im thinking there is something wrong with the i pad.

What exactly happens when you try to connect? Do you get any message, pop up?

Is there any problems in iphone 5 wifi? others connecting but mine is not.. sometimes depends on distance!

is there any problems in iphone 5 wifi? others connecting but mine is not.. sometimes depends on distance! help pls

Hello Angelver22,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Unable to connect to a Wi-Fi network
Verify that you're attempting to connect to your desired Wi-Fi network.
Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Have a nice day,
Mario

Already connected to wifi, has secure connection but cannot connect to app store errrormessage is a secure connection could not be established. please check your date

already connected to wifi, has secure connection but cannot connect to app store errrormessage is a secure connection could not be established. please check your date & time settings. please help

Can't connect to the iTunes Store
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight

TS1398 my wifi is showing connected but i am not getting internet access. When in the settings wifi settings you can see the wheel or timer spinning but never a check mark like my other iPad.

my wifi is showing connected but i am not getting internet access.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My web pages aren't loading when connected to the internet through Ethernet cable?

Yesterday my web pages stopped loading on Safari. I tried loading them on google chrome and had the same problem. I then deleted all saved web site data and reset Safari but this still didn't solve the problem. Finally I restarted with safe mode, where the web pages loaded, but slowly, however when I restarted normally the web pages still weren't loading or partially loading. To test whether this was my computer or the ethernet cable I was connected to, I connected to the wifi at my university, where the web pages loaded perfectly. Plus, when connected to the ethernet cable I could Skype, use Spotify etc., it is just the web pages that are causing a problem. Any suggestions how I can fix this? Thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caught bu|GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|SATA W|ssert|Thrott|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Can't connect to certain web pages

Most of the time everything works great but once in a while I am unable to connect to certain web pages. 2 weeks ago it was aol.com and steam.com. This lasted 3 days and the problem resolved. Today I cannot connect to gamespeak.com. All other websites load with no problems. It is only gamespeak that won't load. I have 3 computers in my house and all 3 cannot connect. 1 is win7 wired (chrome). another is a win7 laptop wireless (chrome). The other is a winxp system wired (IE8).
If I go to www.polysolve.com com I am able to connect. Current internet access FIOS.
Any suggestions?

I can type anything into google and press search and I can only go to 3 of those pages, the others will say cant connect to server. Same with pictures, I google something, anything, go to images and half the pictures will be question marks and then the others I click on may or may not have server connection.

Email but no web pages

our Broadband went down over the weekend and i spent 6 hours on the phone with BT yesterday. i have two net gear routers which i have had tested yesterday and both work, but i cant get broadband with either. BT can ping my router and i can ping google but i cant get web pages up. my ipad gets email but no web pages.
i have now been referred to "wholesale" whatever that means to check the line. any ideas how to fix the probelm or speed up the line checks?

if your internet is working please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester http://speedtester.bt.com and post the results.
Someone may then be able to offer help/assistance/suggestions to your problem
Your ISP is BT retail and the exchange is owned by BT wholesale. BTw have been asked to checked tou connection at the exchange to see if there is a problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Iolo System Mechanic app failed and has caused FF not to act right - not loading buttons and some web pages to be a list instead of what the UI should look like.... I have reinstalled but still have the problem and not sure what to do

Basically certain web pages are not loading proper since app Iolo System Mechanic failed. I have reinstalled FF but still not loading right. Buttons are not showing and some pages are in a list instead of the GUI view.

I installed and uninstalled Firefox several times - finaly after I selected NOT to have Firefox as the default browser, the installation worked and pages loads correctly now! I made Firefox the default browser after the successful installation!

Hello, after Internet Explorer was activated, Mozilla Firefox is blank, when a connection to a web page is asked, it shows that the connection is broken.

Prior to this, it was vice-versa, Internet Explorer was blank and couldn't connect to any web page, after Firefox was activated. When a virus disfunction with Firefox came up, we uninstalled it, installed it again, and it worked fine, with Internet Explorer not working again. When a friend made an adjustement and made it work, we discovered later, that Firefox had the problem of not connecting now.

see http://kb.mozillazine.org/Firewalls

Web pages start to load but blue address bar freezes.

Web pages start to load but blue address bar freezes about a third of the way across
Sometimes the page loads sometimes I will have to refresh the page. Once refreshed the page loads very quickly.
Any solutions welcome it's driving me mad!

Okay, a guess...
The page only contains some JavaScript.
I don't think the page is meant for people to view - here's the code from the page...
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>FOXNews.com</title>
<script language="JavaScript">if(typeof(parent.prInst)=='undefined'){var prInst=1}else{prInst=parent.prInst+1} for(i=0;i<parent.frames.length;i+){if(parent.frames.title=='prif'){prInst+}}this.title='prif';var prs="http://ads.PointRoll.com/PRServe/?pos=s&num="prInst+"&"location.search.substring(1)"&r="+Math.random();document.write('<scr''ipt language="JavaScript" src="'prs+'"></scr''ipt>');</script>
</head>
<body>
</body>
</html>
Tom

My wifi is fully connected but my web pages haven't loaded in two days... What do I do?

Similar Messages

Maybe you are looking for