My Wifi will not work: ipod

My wifi says it is connected on my ipod and works on my computer but whenever I get on the internet or an app that needs wifi it will not work. I have tried everything and it will not even work when on a different wireless router. Any idea whats wrong? Please help

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:                 
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

  • HT204409 wifi will not work after restore

    my wifi will not work at all

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have an ipad 1 16gb, wifi and the wifi will not work.  Under settings, it says "no wifi".  Has anyone else had this problem?

    I have an ipad1 and the wifi will not work.  It is a wifi only model which makes it more interesting.  When I go into settings, it says "no wifi".  Does anyone have a solution to my problem?  It is much appreciated.

    If you are positive there is a good Wi-Fi signal in the area of the iPad I would first reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
    If that doesn't work, I would turn off your iPad and then restart your Wi-Fi router. Unplug the router for 30 seconds then plug it back in. Once the router had completed its restart process and established a link to the Internet then turn your iPad on. Make sure Settings > Wi-Fi> On.

  • HT1414 wifi will not work after restore

    wifi will not work after restore

    Se emy response to your other post
    https://discussions.apple.com/thread/4862098?tstart=0

  • After install of ios7 on ipad mini wifi will not work

    I have installed ios7 on my mini. After doin so WiFi will not work.  Button is greyed out.  When I try to erase all content and go back to factory it wants my password and won't do so because it says no internet connection.  Had I know this was going to happen I would have left well enough alone.  I have tried hard resetting by holding home and off button simultaneously but not working.  Anyone have any ideas?  This mini is now basically useless to me without internet.  I'm really annoyed.

    Hello Andy,
    1st guess would be an incompatible extension from the previous OS, 2nd would be a reinstall of the OS is needed, but...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
    If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

  • TS1398 ios 5.1.1 wifi will not work

    My ipod touch 4th generation has always worked fine, but recently it has said it was connected to the wifi at my house that is password protected so its only used by family but would not allow any connections, no messages would get through to me and i couldnt send any without getting an error, and all of my games that require wifi would not connect. normally i would plug it into my computer and sync it and the problem was resolved, but it started doing it more often and more often. but this last time it didnt work and when i got online to check even my computer could not access the internet. im wondering if this is some issue with the ipod, the modem, or both. i have a freind who also experiances issues with her modem suddenly not working for a random period of time then working again after a bit that we could never figure out, but in this issue it says its connected but wont work.
    another issue is my ipods lock button it has stuck and will not work so im unable to turn it on and off or take screen shots how can i fix that?

    I have no clue what you're talking about.  Perhaps you can rephrase with correct spelling and real sentences that include initial caps and periods and other grammatical niceties.

  • My ipod nano click wheel will not work - Ipod works when docked on mobile speakers from remote control

    My ipos Nano click wheel will not work, however when it is docked on mobile speakers it will work from the remote control.

    If it continues to malfunction after a restore, it's probably bad hardware.
    I'd recommend making a Genius Bar appointment. They'll probably give you a couple options: Replace it with an identical model for a discounted price, or trade it in for recycling and get 10% off a new iPod.

  • Wifi will not work

    I bought my Backberry Curve 8520 in July 2011 and it worked perfectly when I was living in Ireland. But, I moved to Italy in August and Vodafone unlocked my phone in September so I could support an Italian Sim.
    But since then I can not connect to my home wifi and when I top up it drains all my money. I keep getting messages about support plan when I use twitter and I can no longer access my emails nor the browser. When I click on browser the Blackberry icon appears and doesn't even load. Even my BBM does not work on it!
    Does anyone have any suggestions which may help me to connect to the internet?
    When I click on "Manage Connections" there is the regular blue tick next to my Mobile Network and W-Fi but there is no green tick to the right of Wi-Fi!
    Thanks for any suggestions in advance!
    Corbmac

    When you signed up with your Italian provider, did they add a Blackberry Data Plan to your account rather than just a standard data plan?

  • Wifi will not work on iPod 5th Generation

    I have had my iPod 5th generation since early September of last year. It was been working smoothly up until today. The wifi is on and it is recognizing networks but when I attempt to join it either says 'Unable to connect to network' or I put in the password to the wifi network and it immediately asks me to re-enter the password. I have restarted my wireless router, restarted my iPod, reset my network settings on the iPod and it is still doing the same thing. I have not jail broke this iPod ever and it is up to date using iOS 8.1.3 which I installed three days ago. The wifi was working fine immediately after the update which makes me unsure if that is what caused this. Does anyone know how I might fix this.

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • TS1559 I have an iPhone 4s, after updating the phone to ISP 6 my wifi on/off is a dim grey colour and I can not switch on wifi, I have tried restor, reset network settings and updated to ISP 6.0.1 wifi will not work. This is VRF frustrating can anyone hel

    Since updating my iPhone 4s to ISo 6 my wifi setting is a pale grey and can not be turned on. Have tried restore, reset network settings and updated to ISP 6.0.1, anyone have any suggestions as this is really frustrating.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Office Jet 6500 E710n-z WIFI will not work on any devices-pl​ease help

    for some reason, my printer's WIFI quit working.  I have downloaded all of the HP assistance stuff and install all of the software correctly to my laptop.  
    When I print the network configuration page from the HP printer, it says active connection type- "wireless" and it says status "ready."  It passes all of the tests for confirmation and I have reset it to factory settings and started over with the wireless connection wizard.  No matter what I do, my printer won't print from my laptop or my iphone wirelessly.  All the devices, such a phones, will detrect the wifi printer but it just will say "error" when printing. 
    Could this be my wireless router setting?  Should I contact my internet provider and see if there is some secruity on the wifi.  
    The printer asks for my  WAP passphrase- that's my wifi password, yes?
    I don't know what else to do.  It says it's connected to WIFI but nothing prints. 
    Also, I have tried to manually enter my printers URL/ISP so I know that's correct too.
    Any other ideas- I've also shut down and restarting all d evices associated with it. 
    Thank yoU!

    Thank you.  I got it to work.  Phew.  I had to call back the cable company and they had to do something on their end to open up the connection.  Thank you!!!!

  • My wifi will not work after compurter sleeps

    Wifi works great until computer goes to sleep.  When I turn it back on, it can't connect.  Right now I am restarting the computer everytime.  Very annoying.  This only started this week.  It has worked well since Christmas.  This is an imac bought on Dec. 23 of this year.

    This is a know issue. The work around solution is only letting the display sleep, set the options in System Preferences - Energy Saver - Power. If you don't want to use the work around then simply cycle the Wi-Fi when you wake up the computer. You can do this by click the Wi-Fi symbol in the menu and then choose Turn Wi-Fi Off and then Turn Wi-Fi on.
    BTW PLEASE PLEASE PLEASE fill out your profile. Not having a profile completed makes it difficult for those trying to help you. You can do this by clicking Your Stuff in the upper right of this page, then click Profile and filling in the pertinent information.

  • HT1430 reset will not work, ipod not repsonding

    Originally got the high temp message, let it cool down and now it wont charge.  Tried charging into computer and wall charger. Tried holding menu button and sleep button to reset and wont work.  When plugged in screen shows the red battery but wont charge....

    Try here:
    iOS: Not responding or does not turn on
    However, based on the high temp alarm I think you have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My wifi will not turn on. The button is settings seems to be locked. I tried turning it on from the control panel, and also with Siri, but it still does not turn on in settings, so i cannot access wifi. Please help ASAP

    Wifi will not work. The button in settings seems to be locked. Tried control panel and siri to turn it on, doesnt work because the settings wont turn it on. Need help ASAP cause my data limit is approaching.

    If the battery was completely drained the iPad will not respond for some time after connecting it to the charger. Connect the iPad to the charger that came with it and plug that into a good wall outlet. Wait 30 minutes. Then reset the iPad.Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
    If the iPad restarts let it continue to charge until it's battery shows fully charged. If the iPad still does not start Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. Be sure to back up your device before taking or sending it to Apple.

Maybe you are looking for

  • Variable subsitution for target file names

    Hi All, I am using variable subsitution for dynamic file names. I am using the multimapping for multiple files in the target.So i coluld not able to use the dynamic configuration for file names. Now i want to replace all the spaces in the filename to

  • Timed out issue in jsp page!

    Dears, It is really amazing for me to see this issue in my application which I deployed in Oracle Application Server 10g r2. I am using JDeveloper 10g to create jsp pages. On one jsp page i am displaying 15 html tables for a report. All tables have 1

  • Please Help - Cannot install both versions of Garageband

    I am operating on Yosemite and have Garageband 10, but I need to download and install 5.1 (Garageband '09) in order to retrieve certain loops that came with that version that are important to me for certain tracks that I have been working on. After d

  • Blending 2 photos together to appear as one in 5

    I have two "clouds" jpg's that I want to blend into one larger jpg ?  They are very near exact as far as the cloud/sky colors taken at the same place/time. How do I merge/blend them together without the noticeable verticle line that is there if simpl

  • Why did my built-in camera randomly stop working?

    I have HP TouchSmart300 PC. Any assistance or point of direction to fix this would be helpful.