My window can not find air port

After caieport utility my PC can not find the base , I have tried numerous times

I recently purchased one of the new Airport Extreme base stations and after carefully reading the instructions; I first installed the Airport Utility 5.5 that came on the CD onto my MacbookPro. I then connected the new base station to my macbookpro via Ethernet and power it up. I copied a previously saved configuration onto it. All my printers, IMAC and macbookpro were able to connect.
I then used my older base station and my airport express to extend the N and G networks through the house. My problem was (1) the new Airport utility would consistently lose the older extreme base station and the airport express, (2) An my HP printers keep losing the wireless connection to the new airport extreme base station. The only resolve was to consistently restart the new base station, after which (1) the new airport utility would see the older base station and express again and (2) the wireless connection to the printers would be restored.
After about a week of this, I removed the new Airport Extreme and replaced it with the older extreme (802.11N DRAFT) and de-installed the Airport Utility 5.5 and re-installed Airport Utility 5.4.2 and everything works fine.
Has anyone else experienced any problems with the newly released Airport Extreme (fully 802.11N) base stations and Airport Utility 5.5?

Similar Messages

  • Airport Utility can not find air port extreme base station

    I am running XP home on my computer and have an air port extreme base station connected to it wired. I have no problem connecting to the internet yet more times then not the air port utility can not find the base station. On occasion it will find it but most of the time it can not. Rebooting does not help.

    I recently purchased one of the new Airport Extreme base stations and after carefully reading the instructions; I first installed the Airport Utility 5.5 that came on the CD onto my MacbookPro. I then connected the new base station to my macbookpro via Ethernet and power it up. I copied a previously saved configuration onto it. All my printers, IMAC and macbookpro were able to connect.
    I then used my older base station and my airport express to extend the N and G networks through the house. My problem was (1) the new Airport utility would consistently lose the older extreme base station and the airport express, (2) An my HP printers keep losing the wireless connection to the new airport extreme base station. The only resolve was to consistently restart the new base station, after which (1) the new airport utility would see the older base station and express again and (2) the wireless connection to the printers would be restored.
    After about a week of this, I removed the new Airport Extreme and replaced it with the older extreme (802.11N DRAFT) and de-installed the Airport Utility 5.5 and re-installed Airport Utility 5.4.2 and everything works fine.
    Has anyone else experienced any problems with the newly released Airport Extreme (fully 802.11N) base stations and Airport Utility 5.5?

  • Why am I getting an error message,"windows can not find(my Yahoo mail launch address)"when accessing Yahoo mail site?

    Using WindowsXP, and e-mail via Yahoo,browser is Firefox 4.0.I get the following error message when accessing yahoo mail site:"http://us.f831.mail.yahoo.com/dc/launch?action=welcome&yy=1782408664&.rand=0qrsdp1o...Windows can not find(the above address is inserted here).make sure you typed the name correctly,and try again". After this message is displayed on my desktop it begins to fade,and the inbox of my yahoo mail is then displayed..I am able to work all functions of the mail without problems.( I might add at this point that i access the mail program via a desktop icon).When I close out of the program the error message box with the error described above is displayed again on my desktop.I must click on the "X" to remove it.I can access my yahoo mail via Internet Explorer with no problem,as well as accessing via my yahoo home page.

    Here's an image of the ERROR Message. I'm not sure how this forum works -- if this image is an attachment or if it shows up in the body of this reply.
    Here goes...

  • I have just had my hard drive replaced and now I can.t find Air Port to get wi fi

    I have just had my hard drive replaced and now I can't find Air Port for my wi fi

    Go to your Applications folder>Utilities>AirportUtility.app>and there set up your Airport service.  Then return to your Applications folder>Sytem Preferences>Network> and there turn on the WiFi on your iMac.
    Hope this helps

  • I CAN NOT find serial port init.vi

    In labview8.6 , I CAN NOT find serial port init.vi.
    Other lots of icon can be found..... 

    Dennis Knutson wrote:
    for(imstuck) wrote:
    That's because it is called VISA Configure Serial Port. It is located in Instrument I/O->Visa->Visa->Visa Advanced-> Bus Interface Specific -> serial.
    And there it is. Sometimes you really gotta dig!
    You enjoy taking the long way there?
    Message Edited by Dennis Knutson on 05-20-2010 05:48 PM
     I just did a search of the palette and thats where it took me so thats what i posted to help the OP. Besides, sometimes the scenic route is nice. You pass lots of beautiful VIs on the way to your destination that you may have never known existed. And, I actually prefer the quick drop way .
    Message Edited by for(imstuck) on 05-20-2010 08:35 PM
    CLA, LabVIEW Versions 2010-2013

  • Windows can not find ' FILE ': error.

    I have downloaded and installed the production version of SQL Developer. (1.0.0.14.67)
    Windows XP SP 2.
    When I started it for the first time I checked all the file association check boxes.
    If I double click on a .sql file the following windows error occurs:
    Windows can not find '<file>'. Make sure you typed the name correctly, and then try again. To Search for a file, click the Start button, and then click search.
    SQL Developer does startup. The error message is closed when the OK button is selected.
    Any Ideas?
    Regards;
    Robert

    Hi Robert,
    Just to confirm, SQL Developer does actually open the file. The only issue is the error message displayed. I have logged a bug for that.
    There is a work around until that is sorted. If you use explorer to associate the file types with SQL Developer, they open without this error.
    Regards
    Sue

  • Window can not find a system image on this computer

    I have HPPavilion dv6 3134se notebook.when I purchased.its operating system was windows 7 home basic.My friend suggest me to upgrade windows 7 ultimate.he also give dvd of windows 7.i have installed it.after3days a message appear from microsoft.that your copy is not original.ITry to get my previous windows 7 home basic.when i press F 11&amp;force to recovery amessage apear tahat window can not find a system image on this computer.I try to my level find it a message appear.thatspecify the location of the system image.How search system image on the network pleasehelp me with url address&amp;my hp recovery partion also now not loki ngcomputer.i hope some one help me.
    This question was solved.
    View Solution.

    Hi,
    You're welcome, glad it helped
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT4437 can not find air play icon on my ipod touch

    can not find air play icon on my ipod touch

    Which Apple TV do you have? What software is it running? Have you enabled airplay via settings? Are both devices on the same network?

  • NI USB-8473 Windows can not find Driver

    After I install my CAN Software 2.6.1 and connect my USB device, Windows starts the Hardware Wizard but, can not find the Drivers for this device.  I started out with 2.4 and uninstalled and reinstalled it which did not help and then I upgraded to 2.6.1.  This did not seem to help either.  My impression is that this is something to do with Windows or the computer, but I thought I would ask if anyone has seen this problem before in case it is a hardware or software issue.
    Solved!
    Go to Solution.

    Hi,
    Thank you for your post.  The NI-CAN driver is an inf file titled nican.inf.  Instead of automatically detected the driver in the Found New Hardware Wizard, try browsing to the nican.inf file.  This file is found in the following directory: C:\Program Files\National Instruments\NI-CAN\staging.
    If this doesn't work, I would run the Microsoft Windows cleanup utility linked below and remove all NI-CAN registries from your system and then reinstall the driver once again.
    http://support.microsoft.com/kb/290301
    Regards,
    Todd V.
    National Instruments
    Applications Engineer
    NI Prototyping Community

  • Firefox will not open give error can Windows can not find file firefox.exe

    when I try to open the install program for firefox I get error Windows can not file Programs\MozillaFirefox\firefox.exe
    tried to installing update to correct this no luck

    Sounds quite weird that you can't open profile manager or launch the official Mozilla installer. Probably try to reboot, and to scan for malware?
    Malware Removal Links: http://www.safer-networking.org , http://www.malwarebytes.org , http://www.spywareterminator.com , http://www.microsoft.com/security/malwareremove/default.aspx
    If you can, please give more information about what was happening at the moment of the crash. Did the crash reporter start, and can you [https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it#Getting_your_crash_report retrieve] your crash ID?

  • How come can not find air play icon on my iPad 2

    Wanna mirror my ipad2 display to TV but can not find AirPlay icon on my device

    Hi, Daviddegreat.
    The article below will show you how to enable AirPlay Mirroring.  AirPlay does require an
    Apple Digital AV Adapter or Apple TV.
    iOS: How to use AirPlay Mirroring
    http://support.apple.com/kb/HT5209
    Cheers,
    Jason H. 

  • Windows can't find air disk

    I have been searching for a long time now and can't find any answer how get my windows xp to connect to air disk..! Can anyone help would be greatly appreciate.
    ( I use air disk to share data in office, not to syn or anything )
    Thx

    You need to install the Airport Base Station Disk Agent software that comes on the installer disk with the Airport Base Station. You might be able to download the software from Apple, too. This will put an icon on your system tray that allows you to access the AirDisk.

  • TS1398 i was trying to update my itune but it keep showing at the windows can'not find the itune .msi?what can i do to update my itune?

    after i plug my ipod at my windows xp desktop it start automatic update on my itune after downloading the update it start detecting showing new devices is were detected from usb,then the download of the i tune stop responding and it show error can'not locate itune.msi.what can i do to make it right.thank Q.

    Try:
    'Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Maybe here:
    Trouble installing iTunes or QuickTime for Windows

  • Can not find air printer,but friends iPhone does?

    CChange my wifi to shaw and now my ipad and iPhone do not find my air printer, but my friends iPhone does?  ***?

    Yep, here you go
    http://support.apple.com/kb/ht4356

  • Response-can not find air printer

    I can print on my iPad 2 only when I have the option to open in another application. When I don't have an option to open in another application it will not print at all and says air printer not found. I know the printer is set up and wifi is accurate since I can print when I can open in another application. Example: if I try to print from mail, photos it doesn't give me an option to print in another application and it says no air printer found. Can anyone help me so I can print anytime?

    What type of printer is it that you are using? As far as ipad printing there are 2 methods of printing, airprint, and eprint home and biz. The type of router you are using can also have an effect, so if you do have that available it would help out.
    Airprinting is only supported by newer model printers, and is built in to iOS in most of the Apple apps (photos, safari, notes etc). This is usually the easiest method if your printer supports it, but it is limited in what options it gives you.
    Eprint home and biz is a free app in the app store made by HP that adds far more options when printing (paper size, image size, paper type etc), as well as allowing it to print to most networked hp printers, even those that are a few years old. The limitation to this is that you must open things in the app to print them.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

Maybe you are looking for