My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think.

My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think but it is linked as a plug in with chrome and IE. How can I get my windows to recognise the .swf files to play them.

The downloaded file is the projector, not an installer; you need to make the file association manually:
move the downloaded exe file to a location you can remember, e.g. C:\Windows\SysWOW64\Macromed\Flash
right-click on a swf file and select Open with > Choose default program
navigate to the folder you saved the player and select flashplayer_13_sa.exe

Similar Messages

HT1414 iPod Touch has a blank white screen and the computer does not recognise it. I have tried pressing the Home button and Up Volume button and Off button to no avail. Thank you

I tried to download an upgrade that was recommended by APPLE, the upgrade stopped halfway through and the iPod Touch was turned off, now the iPod Touch has a BLANK WHITE SCREEN and is UNRESPONSIVE to the COMPUTER
I wonder if anyone can help
Thank you
Brizey

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I put itunes on my ipad in NZ and still have credit left but its only 72 cent and i cant buy anything with that. then i moved to aussie and bought itunes now that i try to load the itunes it does not work. it says i have to use the last credit but i cant

please help!!

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Windows 8 does not recognise Excite 10

Windows 8 does not recognise Excite 10. Before win7 done this without any problems, now win8 looking for drivers! can anybody advice me what to do

Hi,
Please download the following program and run it on your Windows 8 machine:
http://ftp.hp.com/pub/softlib/software12/COL44840/mp-109033-2/hppiw.exe
You need the printer on your home network.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I recovered my back up via a wired connection. now Time Machine does not recognise older back ups wirelessly and wants to do a first back up

I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.

I recommend the following.
1. Reset the TC to factory.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Rename the TC to SMB standard.
That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
No spaces.
Pure alphanumeric. No apostrophe.
3. Ensure IPv6 is set to link-local..
Do the same thing for ethernet if that is used.
4. Manually mount the TC disk in Finder.
Use Go in the top menu.. connect to server.
Type in
AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
5. Delete current TM setup and redo it with the newly named TC.
See A4 here. http://pondini.org/TM/Troubleshooting.html
If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered.

Elements does not recognise prel file

I saved a project to DVD (photos with background music) Elements does not recognise "prel" file when trying to reload project. How do i open file in Premiere Elements 10

Chris (Herbie53)
There was no Premiere Elements 5 and 6. The version numbers went 1, 2, 3, 4, 7, 8, 9, 10, 11, 12 (latest) So you probably use Premiere Elements 4 or maybe 7 on probably Windows 32 bit XP or Vista.
Case 1. (Here we assume that you have the project.prel file (project) saved to a DVD disc as data disc.)
Even if you had saved that older Premiere Elements project file (project.prel) along with copies of the media that went into it, it is still questionable whether that old project.prel could be opened in Premiere Elements 12. But, assuming that the media was still connected to it (which it probably is not), you could try by right clicking the project.prel file and selecting Open With Premiere Elements 12. Have you gone that route, and the project would not open or you were greeted by "Where is the file...?" messages.
Case 2. (Here we assume that, when you were using the the older program, you took the project Timeline to DVD-VIDEO on DVD disc...this is not the project.prel file, but an export of it.)
In this situation, if you put your DVD disc in the burner tray and explored it, you would see two folders, one named OpenDVD and another named VIDEO_TS. This is your best case scenario. If this is the case.....
a. Put your DVD disc in the burner tray.
b. Open Premiere Elements 12 Expert workspace. Go to File Menu/New/Project and Change Settings.
In Change Settings, set the project preset for either NTSC DV Standard or NTSC DV Widescreen. For now, we will assume NTSC DV Standard. Then, before you exit that area, in the last dialog that you see (new project dialog), make sure you have a check mark next to "Force Selected Project Setting on This Project".
c. Next, back in the Premiere Elements 12 Expert workspace, use Add Media/DVD Camera or Computer Drive/Video Importer where you will select video files from the VIDEO_TS Folder to bring into the Premiere Elements 12 project. You will have to redo the menu in 12. The video files that you want from the VIDEO_TS Folder typically start with VTS_01_1.VOB and continue in series which can be detailed later.
Goal right now is to sort through the details so that we are in sync on what you have in order to enable us to be confident about the troubleshooting strategy.
We will be watching for your comments and results.
Thanks.
ATR
Add On.....The classical recommendation has always been to complete a project in the program in which it was created. But let us see what can be done here.

Windows vista does not recognise router

I had to reinstall my windows vista operating system. Now when i open the utility the menue is not highlighted and the router is not recognised.
I also have an amber light flashing on my router.
It worked fine before the reinstallation. I also tried to reset the router.
please help
anyone?

Hi,
Can you try a different USB port?
Check out this link just in case.
http://support.apple.com/kb/HT4049
Carolyn :-)

TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of g

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .

I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"

My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

Try the following:
In Finder, select the problematic volume and then press command-I.
Expand the Sharing & permissions section if it's collapsed.
If the section is locked, then unlock it by pressing the padlock button and then authenticating as directed.
Tick/check Ignore ownership on this volume.

When i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!

Since i have down loaded the new software my wifi does not work I have been to a apple store and they said it is a hard ware issue I do believe it is not my fault has the wifi workded before cheers Ben..

Since I have down loaded the new software my wifi does not work. I have been to a apple store and they said its a hardware issue. My phone was fine before the down load.

What is your technical support question for these user to user technical support forums?

My Ipad 2 will not open apps that I have download from the app store but will open apps that came preinstalled.

My IPAD 2 will some times not open apps that I have down load from the app store. But will open all of the preinstalled apps.I must go to the app store and install something and then all the apps will open. I should not have to install unwanted apps to keep my IPad working.I have reset and total reset nothing sames to work.

Sounds to me like you may have an issue with the firmware, i.e. the iOS version that you are runing. I also have an iPad 2 and sometimes have to restart it to get it to recognize and run a newly downloaded app. And only once or twice have I had to uninstall and redownload an app that this didn't fix. I think this has more to do with the way an app has been coded more than anything else.
You might try doing a "Reset All Settings" reset and set it up as a new iPad. You should not lose any data, apps, music, videos, etc. that you have stored on your device. I have done this a few times when tweaking the iOS 5.0.1 firmware and never lost anything. You do have to re-enter your ID's and Passwords for wifi. And of course you will need to go back into settings and reset any changes you may have made to things like location and notifications.
I don't know if this will work, but if I was in your place this is the next step that I would take.

I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help

I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help

make sure it's not being connected to by any of the other two
one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
automaticly
then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac

I can't open pdf files I have down-loaded from Safari

I can't open pdf files I have down-loaded from Safari (6.0 and OSX 10.8) with preview or acrobat. I get a corrupted file message. Anyone have a fix?

From the Safari menu bar, select Safari ▹ Preferences… ▹ Security and uncheck the box labeled Enable plug-ins. Test.

My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think.

Similar Messages

Maybe you are looking for