My Windows 8 is asking for mediaaccessibility.dll file.
I have installed and repaired the latest version of iTunes 5 times now. But I cannot launch it without an error message that the mediaaccessibility.dll file is missing. I get this error message: Error 7 (windows error 126)
Hello, Annamite.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.
Similar Messages
-
Windows shared folder asks for permanently delete
Hi,
Any file from windows shared folder asks for permanently delete and after that it is not recoverable... Please help, how to enable recycle bin service??Hi,
This is by design the Recycle Bin only stores files deleted from local drives, not from a shared folder. The workaround is to move a folder in C:\users\<user name> to the shared folder.
For more detailed information, please refer to the thread below:
Files deleting over the Network /share drive is not going to the recycle bin it permanently delete the file but deleting from local drive is normaly going to recycle Bin !
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7119aafa-fe55-470c-ae20-568b80c5dcb4/files-deleting-over-the-network-share-drive-is-not-going-to-the-recycle-bin-it-permanently-delete?forum=winservergen
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
T-code of the window where it asks for evaluation path.
Hi,
I want the T-code of that window where it asks for evaluation path. I want to generate the report in OMHi,
If you are creating repoert through HIS tool, you can use OODS T code to declare the Evaluation path.
Tomesh -
How can I close premiere pro. There is a window opened asking for saving a file, which i Can not see.
Or do this:
or this -
I'm reinstalling CS4 Standard, and a window comes up asking for my previous CS3 serial number. Found number, but still won't take that. What is wrong?
Contact support by web chat or phone.
Mylenium -
Outlook 2007 and 2010 on Windows XP keeps asking for password
I have a fresh installation of Exchange 2013 installed on Windows 2012 and the problem is that Outlook 2007 and 2010 which is installed on Windows XP keeps asking for password.
The problem occurs only on Windows XP while on Windows 7 is working fine.
Any help will be appreciated!Hello
I had similar issue in my environment -Exchange 2010 SP2 UR4-v2 ,DAG 2 MBX servers(MBX1 and MBX2) in production site ,2 CAS in production site ,17 mail box databases , Public folder replicated to all the mailbox servers.
strangely users using outlook 2003 and outlook 2007 were being prompted for user name passwords.
investigations were done as follows
1. test connection status -click on the outlook icon in the lower right of the users desktop.clicked on test connection status ..
2. found that the username was being prompted while attempting to connect to the public folder in MBX1 server.
3. using EMC on the exchange server, changed databases pointing to public folder in MBX1 to public folder in MBX2. This solved the issue for us.however we were not sure of what the exact issue was ..was it public folder corruption in MBX1? .we found
that the users were being prompted for username and password only in outlook 2007 and not in OWA or outlook 2010. this made us rule out possibility of Public folder corruption in MBX1 server.
4.raised a case with microsoft to do a RCA (root cause analysis) . The resolution from them was to change the exchange RPC service on MBX1 from "network service" to "local account" and switch back to "network service".
The reason stated by microsoft is "password cache corruption" .Any ways the problem was solved at the server level.
Hope this helps all of you who have been scratching your head over this issue
Shiva -
Why would a commercial printer ask for Illustrator native files instead of InDesign files?
Why would a commercial printer ask for Illustrator native files instead of InDesign files?
For example, We create 32 hang tags for the same brand. Each hang tag looks identical except for a color bar calling out the different fits. We set the files up in InDesign with a Master Page congaing all the similar artwork. This process saves us a lot of time when making changes to the entire package of hang tags. So my question is... why can't the printer use InDesign. They are saying they convert our InDesign files to Illustrator before printing.A printer who insists on native files but can't take InDesign is not properly equipped. It suggests they haven't updated their capabilities in 15 years.
-
I've installed elements 12 but it won't open it's asking for the exe file but all it does when located is install again. I can't uninstall as it isn't present in control panel. When I open properties it asks to locate the exe or the other options don't work the target is invalid
Hi sambanyc,
What version of Adobe Reader have you installed on your Mac?
Please try installing on a different Admin user account and check if that makes a difference.
Regards,
Rave -
I have a network of 10 computers configured as peer-to-peer work group. I have upgraded one of the ten from Windows XP PRO to Windows 7 PRO. The other nine computers are all running XP PRO. AS near as I can tell they are all configured the same. I have the
same user and same passwords on all computers. One of XP computers is used as a print server. The Windows 7 computer initially was able to access shared files and printers on all XP machines with out requesting a network password.
Suddenly, the Win 7 computer began requesting a network password to access the shared files and printers on the XP print server. It will not accept any of the user names or passwords (all administrators on both machines with identical names and passwords.)
The Win 7 computer has no problem accessing the shared files on the other XP machines. It can even access shared printers in a different work group. Apparently something has changed but I'm at my wits end trying to figure what changed on either the Windows
7 machine or the print server XP machine.
I would appreciate any help. Thank youHi,
Based on my research, I would like to suggest the following:
1.
Disable simple file sharing on the Windows XP computer:
How to disable simple file sharing and how to set
permissions on a shared folder in Windows XP
2.
On the Windows 7 computer, go to “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” and ensure that the
following items are turned ON:
Network Discovery
File and printer sharing
And this one is OFF:
Password protected sharing
3.
Temporarily disable or remove all the security software (firewall, anti-virus, anti-spyware, etc.) on the computers and check if it works.
In addition,
I would like to share the following with you for your reference:
Troubleshoot file and printer
sharing
Hope this helps. Thanks.
Nicholas Li - MSFT -
Hi,
When using narrow down the object to home interface after performing lookup(), it gives error for
'ioser12.dll' not found. If doing 'SomeHome someHome = (SomeHome)obj;' it's working fine.
Regards,
Jitendra KumarRemove the j2ee.jar from your classpath and narrow will work.
The correct version is in weblogicaux.jar.
-- Rob
Jitendra Kumar wrote:
>
Hi,
When using narrow down the object to home interface after performing lookup(), it gives error for
'ioser12.dll' not found. If doing 'SomeHome someHome = (SomeHome)obj;' it's working fine.
Regards,
Jitendra Kumar -
Content Server 6.40 Presents a Save As dialog for ContentServer.dll file
hi All
we have installed successfully the content server 6.40 on a windows 2008 with iis 7 environment. The installation wen successfully with no errors. however when we run a test by calling the URL http://<server>:<port>/ContentServer/ContentServer.dll?serverInfo URL, instead of getting a response, we are getting a save as file dialog to save the dll file. Also, after the installation, even with the install website tick checked, the website was not installed. we had to do the installation of the website manually for the port.
With content server 620 on windows 2000 this was never the case
if anywone has an idea on how to resolve the issue, please advice
Regards
RonnyGOT the Solution
to anyone else who could be going through the same issue, see if the solution below solves your issue
The website should get created if all the roles in IIS 7.0 are installed. Therefore, please try to install the IIS 7.0 by selecting
all the roles followed by installation of the SAP Content Server. By doing so, websites should be created automatically.
In the IIS 7.0, all the roles are not selected during the installation by default. Please make sure all the below roles are included and IIS 7.0 is installed, as per the installation manual for the Content Server on Windows 2008:
Roles needed in IIS 7.0.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled which is done by
default.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
I hope it helps someone! -
I have video clips from a stills camera on my computer mixed in with still pictures in various files. When I sync my iPad to the computer and ask for the files to be transferred to the iPad the video clips are not included (even when I tick the box to include videos). How do I rectify this.
How to use your iPod to move your music to a new computer
-
"recover database until cancel" asks for archive log file that do not exist
Hello,
Oracle Release : Oracle 10.2.0.2.0
Last week we performed, a restore and then an Oracle recovery using the recover database until cancel command. (we didn't use backup control files) .It worked fine and we able to restart the SAP instances. However, I still have questions about Oracle behaviour using this command.
First we restored, an online backup.
We tried to restart the database, but got ORA-01113,ORA-01110 errors :
sr3usr.data1 needed media recovery.
Then we performed the recovery :
According Oracel documentation, "recover database until cancel recovery" proceeds by prompting you with the suggested filenames of archived redo log files.
The probleme is it prompts for archive log file that do not exist.
As you can see below, it asked for SMAarch1_10420_610186861.dbf that has never been created. Therefore, I cancelled manually the recovery, and restarted the database. We never got the message "media recovery complete"
ORA-279 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10417_61018686
Fri Sep 7 14:09:45 2007
ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10418_610186861.dbf'
Fri Sep 7 14:09:45 2007
Media Recovery Log /oracle/SMA/oraarch/SMAarch1_10418_610186861.dbf
ORA-279 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10418_61018686
Fri Sep 7 14:10:03 2007
ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10419_610186861.dbf'
Fri Sep 7 14:10:03 2007
Media Recovery Log /oracle/SMA/oraarch/SMAarch1_10419_610186861.dbf
ORA-279 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10419_61018686
Fri Sep 7 14:10:13 2007
ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10420_610186861.dbf'
Fri Sep 7 14:10:13 2007
Media Recovery Log /oracle/SMA/oraarch/SMAarch1_10420_610186861.dbf
Errors with log /oracle/SMA/oraarch/SMAarch1_10420_610186861.dbf
ORA-308 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10420_61018686
Fri Sep 7 14:15:19 2007
ALTER DATABASE RECOVER CANCEL
Fri Sep 7 14:15:20 2007
ORA-1013 signalled during: ALTER DATABASE RECOVER CANCEL ...
Fri Sep 7 14:15:40 2007
Shutting down instance: further logons disabled
When restaring the database we could see that, a recovery of online redo log has been performed automatically, is it the normal behaviour of a recovery using "recover database until cancel" command ?
Started redo application at
Thread 1: logseq 10416, block 482
Fri Sep 7 14:24:55 2007
Recovery of Online Redo Log: Thread 1 Group 4 Seq 10416 Reading mem 0
Mem# 0 errs 0: /oracle/SMA/origlogB/log_g14m1.dbf
Mem# 1 errs 0: /oracle/SMA/mirrlogB/log_g14m2.dbf
Fri Sep 7 14:24:55 2007
Completed redo application
Fri Sep 7 14:24:55 2007
Completed crash recovery at
Thread 1: logseq 10416, block 525, scn 105140074
0 data blocks read, 0 data blocks written, 43 redo blocks read
Thank you very much for your help.
Frod.Hi,
Let me answer your query.
=======================
Your question: While performing the recovery, is it possible to locate which online redolog is needed, and then to apply the changes in these logs
1. When you have current controlfile and need complete data (no data loss),
then do not go for until cancel recovery.
2. Oracle will apply all the redologs (including current redolog) while recovery
process is on.
3. During the recovery you need to have all the redologs which are listed in the view V$RECOVERY_LOG and all the unarchived and current redolog. By querying V$RECOVERY_LOG you can find out about the redologs required.
4. If the required sequence is not there in the archive destination, and if recovery process asks for that sequence you can query V$LOG to see whether requested sequence is part of the online redologs. If yes you can mention the path of the online redolog to complete the recovery.
Hope this information helps.
Regards,
Madhukar -
I've been having a lot of problems trying to get an old batch file we have laying around, to run from my powershell script. The batch file actually asks for two inputs from the user. I've managed to put together a powershell that echos a response, but of
course, that only will answer one of the prompts. As usual, I've simplified things here to get my testing done. The batch file looks like this:
@ECHO OFF
SET /P CUSTID=Customer Number:
SET /P DBCOUNT=Number of Live Databases:
ECHO Customer Id was set to : %CUSTID%
ECHO Database Count was set to : %DBCOUNT%
Two inputs, two echos to verify values have been set. Now, the powershell looks like this:
Param(
[string]$ClientADG,
[string]$ClientDBCount,
[scriptblock]$Command
$ClientADG = '1013'
$ClientDBCount = '2'
$Response = $ClientADG + "`r`n" + $ClientDBCount
$Command = 'Invoke-Command -ComputerName localhost -ScriptBlock {cmd /c "echo ' + $ClientADG + ' | E:\Scripts\Setup\Company\DatabaseSetupTest.bat"}'
powershell -command $Command
Output looks like:
Customer Number: Number of Live Databases: Customer Id was set to : 1013
Database Count was set to :
As expected, as I'm only passing in one value. I can't figure out how to get a second value passed in for the second prompt. Instead of $ClientADG, I tried to mash the two value together in the $Response variable with a cr/lf or a cr or a lf in between,
but no go there either. The first input gets set to the second value, and second input is blank still. In the essence of time, I need to get this batch file called from Powershell to get some folks productive while I actually rewrite what the batch file does
in another powershell, so it can be integrated into other things. (I'm automating what a bunch of people spend hours doing into multiple scripts and eventually one BIG script so they can focus on doing their real jobs instead).
How do I get this right in powershell? I don't want to modify the batch file at all at this point, just get it running from the powershell.
Thanks in advance!
mpleafIt's a "simple" test so I can figure out how to get the arguments passed from ps to bat. The bat file looks like this:
@ECHO OFF
SET CUSTID = %1
SET DBCOUNT = %2
ECHO Customer Id was set to : %CUSTID%
ECHO Database Count was set to : %DBCOUNT%
That's it. The PS script looks like this:
Invoke-Command-ComputerName myserver-ScriptBlock{cmd/c"E:\Scripts\Setup\Company\DatabaseSetupTest.bat
1013 2"}
That's it. The bat file exists on "myserver", and I'm getting the echo back, but without the values.
mpleaf -
Mediaaccessibility .dll file is not on computer, where do I get this file?
Where do I find the mediaaccessibilty.dll file?
What is it for?
and why do you need it?
Maybe you are looking for
-
Dual Boot with Win8 on UEFI with SSHD
Hi folks! I have a Lenovo Y40 laptop which currently has Windows 8.1 preloaded, which I unfortunately have to keep for a host of reasons. I've been meaning to install linux on my laptop for a while though, and now I finally have the time. However, I'
-
I have updated my iphone 4 with iOS 6, but now i am unable to transfer my music videos to iphone.I cant add a music video to itunes using 'add file to library' and then transfer it to my iphone. Am using itunes 10.7.
-
Close a PO so that no further postings hit it
Help, I am interested in knowing how to close a PO so that no further invoices and goods receipts may be entered. Even when we have marked Final Invoice and Delivery complete boxes, we can still enter another invoice against that PO. We are using SRM
-
Imac 17 inch c2d (64bit graphics card) display vs. mpb 15 c2d display?
hello, was wondering how my 17 inch imac c2d's display compares to the quality of the 15 inch mpb c2d? (ive heard all of the uneven illumination, ect ect) but can it really be worse than what the imac 17 inch displays offer? i just want to use a mpb
-
Prompt values At the top of OBIEE reports
Hi All, Actually we have a requirement like we have to display the values which is entered by the user in the prompt , at the top of the answers report. For eg: If the user enters the "Name" as "x" and "Number" as "1″ in the prompt, at the top of ans