My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro.

My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro. I have read many online threads without a solution. Do you have one?

My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro. I have read many online threads without a solution. Do you have one?

Similar Messages

  • TS4611 I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also after 3 meters away it keeps searching for network! It is the second try and the same issue. Will Apple ever come up with a solution?

    I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also, after 3 meters away from the rooter it keeps searching for network! It is the second try and the same issues. Will Apple ever come up with a solution? There is a program pack for the connection issue but I cannot believe that this computer wifi keeps connected only while nearby the rooter!

    Applied this update?
    http://support.apple.com/kb/TS4611?viewlocale=en_US&locale=en_US
    If the update is installed aready, you may have to wait until OS X 10.8.5
    update if and when it is relased.
    Best.

  • Doc to go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro

    Doc To Go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro (15-inch Late 2011), Mac OS X (10.7.5), ipad iOS 6.0

    Post in the iPad forum, this one is for OSX

  • Do you have the way of fix WiFI connection after restart on unlock the macbook pro

    do you have the way of fix WiFI connection after restart on unlock the macbook pro with retina

    Toddy, see [http://news.cnet.com/8301-30685_3-20004620-264.html?tag=mncol;txt]

  • Galaxy Note Edge Wifi Connection keeps dropping off

    My wifi connections keeps disconnecting even after many attempts to login and getting connected on my home wifi it disconnects within a few seconds. Checked my modem and router and all is good (up to date firmware) and no connection issues on other devices. I verified my Edge is up to date as well. I am at a loss as to why it keeps auto disconnecting from my wifi. I tested tethering to my other cell phone and it stayed connected to it. So where do I go from here?

    Cesmenow,
    Thanks for reaching out to us. We can assist you. To confirm, this is only happening on your home wi-fi connection or do you also experience it with all wi-fi's?
    We can try a couple of troubleshooting steps to resolve this: First, try resetting the app preferences by going to Settings>General>Application manager>Applications then press Settings>Reset app preferences. Tell us if this helps.
    If not, then please run your device in Safe Mode - http://tinyurl.com/oo54noe and try again. This turns off all 3rd party apps. Tell us if it helps. 
    Thank you,
    Samsung Support ^Kov

  • T400 WiFi connection keeps dropping

    My T400 WiFi keeps dropping the connection, and wonder if anyone has any suggestions.  When it drops, I've tried to reconnect by going to Network and Sharing Center, clicking on Wireless Network Connection and try to restore from there.
    I get a repair window, then nothing happens.  The machine seems to lock up - I lose the task bar, the Windows button doesn't work, and I have to force shutdown via Ctrl-Alt-Del.  When it boots up again, the wireless reconnects without problems, but then will drop out again after a few hours.
    I've tried reinstalling the most recent drivers for the wireless card, but to no avail.
    Any suggestions, please? 

    You can try either of these and see if they help.
    Tap Settings, then tap Safari on the left side. Then on the right side - tap clear history, clear cookies, clear cache. Clear all three. Reboot your iPad. Hold down on the sleep button at the top until the red slider appears and slide to power off. Then hold down on the sleep button until the Apple logo appears and the iPad will restart. Launch Safari and see if helped.
    If that doesn't help, try this. Tap Settings, then tap General on the left side, then scroll down on the right side and tap Reset, then tap Reset Network Settings at the top. Reboot your iPad as described above. Go to WiFi select your network, enter your password and try again.

  • Wifi connection keeps dropping from mbp

    how disappointing. after spend a few years thinking about switching to mac from pc i finally pulled the trigger and was looking forward to some issue free computing.
    after investing in a new 17" mac book pro how disappointing it is to find that it drops the wifi connection every few minutes.
    I live in the country so have no other wifi networks nearby to cause interferance. in the house we have 2 iphones, an ipad, samsung netbook and sony laptop all of which have no issues whatsoever with the connection...ever.
    during browsing the signal strength will suddenly drop to zero. to get back on I have to click on airport and select the network name again and a few seconds later the connection is back there, fulll stregth.
    I am only ever a few meters away from the router (4-5m) so range is not the issue. i've installed all software updates so that can't be an issue.
    come on apple - this is not the user experiance i was looking for from a £1500 machine.
    i've googled the issue and tried a few of the solutions people have suggested but had no joy.
    any ideas how i cn fix the issue?

    I also find the experience with Wi Fi on the unibody MBP of mid 2010 production less than stellar. I have a MBP, 15", i7 and also decided to 'pull the plug' on Windoze and get the Mac experience. Build quality is stellar, human/machine interface off the charts and a blast to use. BUT, that said, we have a Linksys router and five other PC's, plus numerous other toys running Wi Fi including our Netflix (Vizio) box....and the only thing that EVER drops a signal is Mac....and I do mean the ONLY thing.
    From what I can tell in researching the issue (and I've done a TON of it!) is the encryption mode seems to be far, far more sensitive on the MBP's than similar Windows machines. The PC's just take whatever signal you feed them and are happy....the MBP seems to balk sometimes and I've juggled my settings on it until now I do have a robust connection but still feel Apple needs to research this MUCH more....there are a ton of complaints that all center on mid-year 2010 produced MBPs of all sizes, all processors and it's not confined to this message board, they're everywhere!
    Fuel to the fire comes if you run an Airport Express too. We've got one for running our Bose sound system and it also just drops out....have arrived home and see the green light changed to orange and have to run the Airport utility to get it synced back up.
    My .02 cents worth, at least.

  • When in sleep mode my wifi connection keeps dropping out

    Since updating to iOS 6 on my iPad 3 when I but my pad into sleep mode I loss wifi connection. When I wake the pad the wifi connection comes back.
    Any help would be appreciated.

    Not likely an infection at all.
    Wake from sleep is usually some problematic USB or FW device.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for Sleep/Wake problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Why does my wifi connection keep dropping in and out?

    I have Samsung Galaxy Note 2. The wifi is connected to the wireless router and is the only pc of equipment that is. Full bars. Yet the note keeps dropping the wifi saying it has authenticity errors? My previous cell had absolutely no issues. And its a new router.

        I regret to learn of the issues, funeralguy77! Lets figure it out together. Can you try to connect another device to the same WiFi connection. Does it connect? Have you tried to delete/forget the connection and trying again?
    Please share additional details so that we can help!
    Thank you,
    LenaA_VZW
    Follow us on Twitter @VZWSupport

  • HT1338 wifi connection keeps dropping off on macbook pro

    hi, i just bought a Macbook Pro 13" and find that the wifi connection on my Macbook keeps dropping off every few minutes. i have tried numerous measures suggested that i could find on the net but the problem still persists. i don't know if it has anything to do with the Norton Internet Security that i installed on the laptop. pls help. thanks.

    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Wi-Fi Problems in OS X Yosemite
    Wireless Diagnostics
    Also try turning off Bluetooth.

  • Why does my wifi connection keep dropping every few seconds

    my new mac air is only a week old - it was working perfectly til yesterday now it won't hold a wireless connection.  won't even hold with an ethernet connection to mobile phone.

        I regret to learn of the issues, funeralguy77! Lets figure it out together. Can you try to connect another device to the same WiFi connection. Does it connect? Have you tried to delete/forget the connection and trying again?
    Please share additional details so that we can help!
    Thank you,
    LenaA_VZW
    Follow us on Twitter @VZWSupport

  • My home WiFi connection keeps dropping, how can I fix this?

    I have a MBP Mid2009 which is running on Yosemite. A couple of months ago it started giving a nosy issue: At home when connected to my home network, after being connected for 1 minute the connection drops, keeps connected to the router via WiFi but the internet drops. This only happens when the network is password protected, once, I removed the password and connection had no issues. Again this only happens at home, it is an Arris router and only happens when I assign a password.

    Hello joe2616,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your Wi-Fi network is dropping, please follow the directions outlined below.
    Symptom: The network connection drops unexpectedly
    Your Mac may not not stay connected to your Wi-Fi network reliably.
    Your Mac may stop accessing the Internet during use.
    Solution
    Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
    Check your range to the Wi-Fi router and reduce the effect of interference.
    If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
    Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • I can't restablish wifi connection between an C4580 and a Macbook Pro Tosemite 10.10.1

    The printer worked both with USB or WiFi till I must change my router. The setup program contained in the instalation disk broke in the final step so I'm unable to configure the wifi. 
    The set print and scan, Driver version is 5.0.4.
    What can I do?

    Hi @Xoan,
    Welcome to the HP Forums!
    I believe the issues you're running into are because your C4580 doesn't have an HP software package for OS X 10.10, so to reconfigure the wireless, you will have to take a slightly different approach
    I'd recommend that you follow the steps in this Re: Photosmart C4780 post that I did earlier this year and those steps should help. To restore the network defaults please go to page 19 of your printer's User Guide and it will explain.
    Let me know how things go and if you're able to get things working wirelessly!
    Happy Holidays!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • I am unable to get Airport Extreme WiFi to work with Windows 8 Sony Laptop

    My Airport Extreme WiFi works with my Mac Book Pro, iphones, ipad and DVR's, but will not work WiFi with my Sony VAIO laptop running Windows 8.  Although it does work with the laptop using a ethernet cable.  Has anyone else had this issue and can you please tell me how to resolve the problem?

    Windows can have issues with the wireless name.
    Make sure the name conforms to windows standard.
    Short, 2-20 characters
    No spaces,
    Pure alphanumeric.
    eg AEwifi is a good wireless name.
    Fred Blog's Airport Extreme Wireless87AD34 is a really bad name.
    Test also by removing the security and just see if you can connect if the short name doesn't help.
    WPA2 Personal is really the only security worthy of the name and the password should be mix of upper and lower case plus numbers.. keep it pure alphanumeric also.
    Set fixed wireless channels at least for 2.4ghz may help, depending on your location geo standards wise.
    Test 11, 6, 1 in that order. With no security briefly. And a short name. (different name on the two bands is also a good idea).
    Then wireless is not compatible.. you should download another driver for whatever wireless card the Sony uses.. intel most likely and they have a reputation as lousy. So download latest and a few prior to that as well.

  • HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

    I have three Airport Extreme (AE) routers in my home network.
    The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
    I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
    What should I do?
    For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
    For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
    FYI
    HP LaserJet Firmware Update Utility for HP P2035n is available
    Version: 20120105 (19 Mar 2012)
    Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
    File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
    line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

    Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
    Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
    My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
    The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
    You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
    Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
    I'm assuming that you are asking about an Ethernet switch here, correct?  The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
    Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
    Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
    Post back if you need any tips to get things setup.

Maybe you are looking for

  • In which table, we can find SCM customer code.

    Friends, I am writing an user exit for VA01/VA02/VA3/VA32. I am getting the customer number from VBAK-KUNNR  when I execute any of the above transactions. According to functional sepecification, we can find SCM code in the data base table ADRC. (we c

  • Macbook a1181 airport antenna cable socket problem

    Was replacing cracked screen on Macbook A1181 and in the process (quite unfortunately), both black and white antenna cables for the airport card were yanked from (ripped out of) their metal sockets.  Tried to delicately feed the cables back into thei

  • PO related

    Dear All , The requirement is like this . When we create PO , if it is associated with release procedure . The mail should be triggerd to first approval authority , after first aprroving authority approves that the mail should go to 2nd level . How s

  • Bitmap data vs memory usage

    Simple question Usign cacheAsBitmap is usedfull in many case. I just wondering if the memory usage used when a clip is set to true will be free when the clip will be removed from the timeline. I want to used cacheAsBitMap for some clip, but don't wan

  • Muxing Fails with audio fail, works without...?

    Hi there, I'm working on a DVD that contains a multi-angle track. Muxing fails on the DVD when it attempts to muxing on the first multi-angle clip. However, if I remove the audio file, it works fine and muxing is successful, but I need the audio for