My wireless all in one says it is not connected to my computer and yet it prints just fine. can't sc
I cannot scan, the error message says I am not connected to a computer and yet I am able to print from my computer.
Why would it then be saying that I am not connected to my computer??
What operating system? What router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
I have an iPad 4, I am connected to WiFi but all the apps say it is not connected.
I have an iPad 4, I am connected to WiFi but all the apps say it is not connected.
Being connected to your wifi network is one thing. Being connected to the internet is another thing.
Try rebooting the router. Just pull the power for a few seconds. No settings get lost. -
I Tunes consistently says I am not connected to the internet and I am--a wireless connection to my Dell computer, Windows 7 , Firefox browser set to no proxy. I am completely disgusted with trying to fix this. I do not know what to do anymore.
Hey there vreewillie!
Here is an article that will help you troubleshoot this issue with your iTunes Store connection:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards
ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1 -
My iPhone 5s wont charge it keeps saying that its not supported with this accessory. It was working just fine about 2 days ago, what can i do?
This is the 4th charger I've bought, i don't want to keep wasting money on chargers anymore.a_man_duh wrote:
My iPhone 5s wont charge it keeps saying that its not supported with this accessory. It was working just fine about 2 days ago, what can i do?
Take it into an Apple store and have it checked out.
This is the 4th charger I've bought, i don't want to keep wasting money on chargers anymore.
You shouldn't have bought any.
They are part of the 1 year standard warranty.
Take it into an Apple store for free replacement (if not user damaged). -
And then put in rice for 3 days and plugged it into my computer but it keeps flashing the Apple logo and a no charge sign. It also is not connecting to my computer and it does not say "Amelia's iPhone" in iTunes
Put it in rice for another 4 days.
-
Officejet Pro 8500 Wireless All-In-One Windows 8 driver not working
Hello!
I recently got a new Dell Inspiron computer running the 64-bit version of Windows 8, and I have an Officejet Pro 8500 Wireless All-In-One Printer from a long time ago. I don't have the disc version of the driver, since I purchased the printer before Windows 8 came out, so I tried to download it from the HP website. Whenever I try to run it, however, it says that it is extracting, but once the extract is finished, nothing happens. The Installation Wizard doesn't pop up, and there is no error message explaing it. Help please?
Thanks!
This question was solved.
View Solution.Hi,
Can I check if your Officejet Pro 8500 is A909 or A910? Alternatively, you can install the class driver built into Windows 8 to print to your printer. There are also a couple of Windows Store apps (HP AiO Remote and HP Scan and Capture) that would work with your printer.
I work for HP. -
Apple software server says I am not conneted to the internet and I am. I need to update software on my iTouch.
1.Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
Safari > Preferences > Extensions
3. Turn off proxies, if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
4. Uninstall anti-virus software, if any.
5. A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273 -
My subject message basically says it all. My touchschreen is not working at all. I went into device manager and found error message code 45, which states that the "device is not connected to the computer."
I have tried updating drivers, uninstalling and reinstalling the device, and other things, but nothing working.
All advice appreciated.Hi @Jim9 ,
Welcome to the HP Forums!
I saw your post regarding the error code 45. From what you have described this sounds like it is a hardware issue. The only real troubleshooting I can recommend (that you haven't already done), is going a full System Recovery to restore it back to factory defaults. If the issue still occurs then we know it is a hardware problem.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever I attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.
I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever I attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.
-
Messenger says i'm not connected when I am and won't open
Hi, I don't know if it's because I don't have internet at home, but I usually am able to connect with FireWire to the net and everything works fine, except for Messenger. When I log in, a pop up appears saying that my log in did not work ''because the service is not available or you may not be connected to the internet.'' Yet I am connected to the net. How do I fix this problem so I can actually go and chat with my contacts? Any ideas? Thanks.
Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Next, try doing a manual install/update using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch -
I have my IPod Touch connected via USB but it says it's not connected to my computer
I have my IPod Touch connected VIA USB port but a message tells me it's not connected to my computer so I can't get mail, etc. What do I have to do to remedy this?
Thank you.
RjhsWhat is the exact wording of the error message?
What are you trying to do?
The USB connection provides not internet connectivity. The iPod can only connect to the internet via wifi -
I tried to restore my iPhone 3G and I get a message that I am not connected to the internet but, I can barouse on the internet with my search engins.
It's hard to tell what password you are referring to. But my guess is you are being asked for the password to the iPhone's backup you created in iTunes. It sounds like you chose to encrypt the backup.
If that is the case, the following applies:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from http://support.apple.com/kb/HT4946 -
I am unable to scan using the hp office jet pro 8500 wireless all in one printer from an I-MAC
I have a new I-MAC OS Lion computer and an older HP Officejet Pro 8500 wireless all-in-one printer, scanner, fax, photo. I cannot scan, though I can print and I can fax. The error message says I must be connected to the network, and yet I am connected. The only diagnostic tool available is for MS systems only. Help???
Hi,
Make sure to use any scan method available for Lion.
If you have the HP Scan application installed, be aware that the used software version is not intended for Lion.
Please follow the steps below to find what scan methods may be used on the OS:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01910186&lc=en&cc=us&dlc=en&product=3752459
If there is still any problem while trying to scan, also make sure to install the latest HP Printer Driver 2.9 by clicking the Apple icon and then Software Update.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
My Airport Extreme 5th generation says it's not connected to the modem
My airport express died after 7 years. I upgraded to the Airport Extreme however when trying to configure it says I am not connected to the internet and that it can't find the DNS server. Any suggestions? I have Time Warner as my ISP.
Some cable modems store the identity (MAC address) of the computer/router attached to them and will work only with that one until they are reset (sometimes by powering them off and back on, sometimes by remote command from the cable provider). I have no clue whether yours would be one of them, but you might try the power cycle trick.
Another possibility is that your Extreme has not been configured properly to work with your modem. An example of a mismatch would be an Extreme trying to use DHCP to get an IP address from a modem not equipped to issue one.
Maybe you are looking for
-
How do I get my Apple TV NOT to control my Macbook volume?
We just recently bought an Apple TV. We synced it to our new remote to control volume and everything. Now, when we're on the Apple TV, when we move up and down on the screen, my volume on my Macbook Pro goes up and down with the tv. How do I get that
-
BAPI for Posting the WIP document with respect to profit center
Hi All, as per the SAP standards SAP posts the WIP revaluation to the profit center of the subcomponents instead of profit center of the manufactured material.. But now i have write a logic to make correcting entries for WIP revaluation to the Profi
-
When I am reading an email that I received and want to follow a link in that email, FF prevents me from doing so. It shows a new pane informing me that FF has prevented me from following the link. If I click the "Allow" button in the upper left-hand
-
Hello HR Gurus, I need to know about infotype 0007 (Planned working Time). This infotype is used in Time evaluation for time processing. I need to know where else is the infotype details like daily working hours, weekly working hours, monthly working
-
Removed SQL 2012 AV group leaves phantom processes consuming large amounts of resource
Hi, I have been experiencing performance degradation on some production servers that previously were part of a SQL 2012 High availability Group. I recently used a small window of opportunity to test the HADRON groups on some of my SQL Servers. Unusua