My wireless printer is not working since i allowed hp updates from the internet with no solution

I accepted upgrades from the internet for my printer HP Photosmart 5510 series; now I cannot print anything not even a test page.  What are my options and how can this issue be solved?

Hi,
My suggestion: rollback or backout the updates using Windows Restore. To help us answer question quicker, please read this:
   http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • TS3048 my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

    my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

    I just had the same problem. And I found the solution, on Youtube.
    The problem is that these ******** at apple designed the battery compartement, the distance between metal contacts too big.
    That means the batteries plus or minus poles are not touching the corresponding contacts in the mouses battery compartement.
    Most likely the battery doesn't get pushed up to touch the plus contacts.
    I used a fingernail to push the battery up and tadaa, the green LED came on.
    The guy in the Youtube video just put some folded aluminium foil under the minus poles for bridging the gap.
    See here, "How to fix the Apple Magic Mouse!": 
    https://www.youtube.com/watch?v=7vlDEVfV45s
    Hope this helps.
    <Edited by Host>

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • My iphone 4 is not working and I cant reset it from the computer either because it wont connect to it I need help!!!

    My iphone 4 is not working and I cant reset it from the computer either because it wont connect to it I need help!!!
    1. I tried connecting it to itunes for a system reset and it didnt work.
    2. The phone wont even turn on!!!

    If the phone wont turn on it sounds like it needs to be charged.  Plug it into a charger and wait about 15 minutes and try turning it on while still charging. Have you tried holding in your home button with the on/off button held in?  Hold them both together until the apple logo comes up and then release them.  The screen will blink off an on while it is resetting. I still think this is a battery issue. Good luck~

  • Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb.  Any suggestions?  Thanks. LL

    My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB.  Have had no previous issues with printing, scanning or faxing.  When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the  on my MAC which shows the same problem.  All of the color and black cartridges are new.
    The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
    Any suggestions?  Could this simply be a compatibility problem?  I'd sure like to keep my Canon printer.
    Thanks,  LL

    Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
    Also an FYI - this is the Mavericks forum. The Yosemite forum is here

  • CAC not working since 4.0.5 update.

    I performed the following updates and have not been able to successfully use my CAC card to access DoD webmail and restricted sites since:
    Java for OS X 10.6 update 1
    Safari 4.0.5
    I configured my MacBookPro using the CAC on Mac website http://militarycac.com/apple.htm which had worked great prior to Safari 4.0.4.
    Can I revert or can someone help me?

    I'm having a similar problem with my CAC card and outlook web access. Mine however, goes a little further into my own OS. First off, my webmail used to work, and now doesn't. I never used to have problems with the keychain, nor did I have to use the ID pref workaround mentioned below.
    I've gotten to the point where I cannot even open keychain with my CAC card inserted without getting a beachball of death. 95% of the time it results in keychain locking up an having to be force quit. I can occasionally coax keychain to let me click on the CAC card to see the certificates, but the second I click on one, poof keychain is dead. Interestingly, if I first click on the encrypted email cert, and then highlight the other two, it won't lock up and I can copy them to one of my other keychains. I can't click on either the DOD or DOD-EMAIL certs by themselves tho. Also, if I create an identity preference, the only way to get it to work is to create one based on the encrypted cert, and then edit it and change it to one of the other two. After that the cert, typically, works fine
    I'm also using Safari 4.0.5 and performed the Java update, and a subsequent update. I'm trying to pin down when it stopped working and I'm thinking it was late December or early January.
    Looking back at my software update history, I installed 10.6.2 and Safari 4.0.4 in November. I recall the card worked until at least early/mid December, so thats not the issue. I installed Java for Mac OS X 10.6 Update 1 (1.0) in mid December and the 2010-001 Security Update a few days later. The next relevant update was Safari 4.0.5 in mid March, but it was long broken by then. I'm convinced that the problem was the security update as my CAC/OWA login was working just fine in early December.
    I can click on my identity preferences, delete them, once in a blue moon after a fresh restart I can even right click on the CAC certificate and create a few new identity preferences.
    After tooling around on militarycac.com/apple.htm I noticed a blurb about certain websites reporting an incompatibility. The instructions directed me to use the develop menu (turn the menu on in the advanced tab in safari prefs) to change the reported browser type from Safari to IE. I got https://nrows.sscno.nmci.navy.mil/nrows/ to work, by following the instructions. For sh*ts and grins, I tried webmail with safari reporting as IE and still nothing. It still won't even recognize that it should be asking for a CAC certificate.
    Interestingly enough, for the NROWS page, I didn't have to create a new identity preference. I was prompted to select a certificate in safari, in the background I had keychain open and noticed that it automatically created an identity preference. In that vain, I deleted my identity pref for webmail and just tried hitting the link, hoping it would auto create one. It didn't. Interestingly, I get the same 500 internal server error when I have an identity preference for webmail as I do without one. Weird.
    The following excerpt doesn't really apply in my case as I'm not using those versions of the card, but might be helpful to someone, so I'll report it here. Excerpted from militarycac.com/apple.htm: +If your new CAC (the one you were just issued) does not work, you may have received one of the new PIV II CAC's. You can tell if yours is this type by looking on the back at the top for either of these: "Gemalto TOP DL GX4 144K" or "Oberthur ID One 128 v5.5 Dual." A possible fix for you is to download the updated TOKEND from MAC OS FORGE.org download the CAC-NG (BETA v0.96)+
    +INFORMATION: The Smart Card Services Project Team is pleased to provide access to theBETA for CAC Next Generation (a.k.a. CAC-NG) Tokend support for Mac OS X 10.5 "Leopard". Support for Snow Leopard is forth coming, but you can proceed to test with your Mac OS X 10.5.6+ machines with this installation.+
    Surprisingly, for https://secure.bol.navy.mil/menu.aspx I simply clicked the CAC login button. I was surprised that I wasn't prompted for a CAC certificate, nor was a prefrence created in keychain, but it worked just fine. That got me clicking on some other websites I haven't been to on my laptop since the problems started and which I used to have ID prefs for. I've listed them below, these are mostly navy sites, one army, and all work fine.
    https://ntmpsweb.ntmps.navy.mil/fltmps/ no preference used/created
    https://npc.navy.mil/ no preference used/created
    https://secure.bol.navy.mil/menu.aspx no preference used/created
    https://wwwa.nko.navy.mil/portal/home?cacLogin=true preexisting preference
    https://infosec.nacy.mil/ no preference used/created
    https://www.us.army.mil/ no preference used/created
    https://nrows.sscno.nmci.navy.mil/nrows id pref auto created
    I'm just experiencing some weirdisms with keychain, and a total no-go for webmail... any thoughts? I've tried to give all the info I've found out. Here is some other misc info as per my system.
    Installed/configured/misc troubleshooting:
    - cookies deleted
    - ID prefs deleted and recreated
    - disk verify / permissions fixed
    - Keychain 4.1 (37196)
    - CAC card version Oberthur ID One V5.2a Dual 2050...
    - SCR3310 v2.0 (driver version 2.4.1 http://www.txsystems.com/scmdrivers.php)
    - DOD Root CA 2
    - DOD EMAIL CA-19 (corresponds to the email cert CA-19 on my CAC card)
    - CAC certs installed/copied to login (also tried them with system)
    - CAC certificates recently reinstalled on the CAC card by PSD and the certs/prefs in keychain are updated
    - X509 Anchors installed in keychain (tho it worked fine without as well, this seems to be optional)
    Not using parallels, this is strictly in Mac OS X running safari. Permissions have all been repaired and using my root login or my standard one there is no difference. I have five other mac users who I've personally set up their cards/webmail access and all stopped working at about the same time. We're all using various versions of iBooks, MacBooks, MacBook Pros and OS versions from 10.5 thru the latest build of 10.6.3. According to https://infosec.nmci.navy.mil/PKI/appendixa.pdf the reader we're using should be fine.
    Something else is going on here. Not sure what tho. Hopefully the info I've posted can help someone knowledgeable shed some light on something.
    Message was edited by: wakazashi

  • My Epson printer stopped working with Firefox today. It does test pages, will work on Notebook, and will work with IE. Up until today it worked with Firefox. Why can't I print anything from the internet with Firefox?

    Up until today, I did everything with Firefox. Then I was on Paypal and went to print a shipping label and the printer would not work. I went to troubleshoot page and it printed a test page. I uninstalled my printer and then re-installed it. Still would not work from an internet page. I did a system restore. Still didn't work. Called Epson. They say it's a Firefox problem because it works on Notebook and test pages. I installed IE and the printer works. What happened and how can I get it back working with Firefox?

    I have the same problem, I cannot print PayPal shipping label off of Firefox. I did the about.config entry and have seen that the print.print_printer does not exist at all in the list of entries. I use Vista 32. I use an Epson 545 wirelessly.
    Can anyone help?

  • Wireless printer does not work after update

    I have VM fusion running on my MAC with a wireless printer enabled on my MAC. Prior to the security update, the printer worked seamlessly. Since the update, I can no longer "see" the printer in Windows XP. Any suggestions?

    More information.
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • Printer shares not working since upgrade to samba 3.5.0 - SOLVED-ish

    I share my printer with my wife's XP laptop and another linux box.  This has been the position for the past 2 years or so, without any problems at all.  Yesterday I did my first reboot for a couple of weeks, and the first, therefore, since samba / smbclient upgraded to 3.5.0.  I can no longer print from the XP or other linux boxes.  Samba logs the error as :
    laptop (10.0.0.5) connect to service Oki initially as user visitor (uid=1001, gid=1001) (pid 12634)
    [2010/03/13 18:31:51.509666,  0] printing/print_cups.c:108(cups_connect)
      Unable to connect to CUPS server /var/run/cups/cups.sock:631 - Interrupted system call
    Setting cups logging to debug, the closest entries to the above attempt is as follows :
    D [13/Mar/2010:18:31:21 +0000] cupsdAcceptClient: 13 from localhost (Domain)
    D [13/Mar/2010:18:31:21 +0000] Report: clients=1
    D [13/Mar/2010:18:31:21 +0000] Report: jobs=500
    D [13/Mar/2010:18:31:21 +0000] Report: jobs-active=0
    D [13/Mar/2010:18:31:21 +0000] Report: printers=1
    D [13/Mar/2010:18:31:21 +0000] Report: printers-implicit=0
    D [13/Mar/2010:18:31:21 +0000] Report: stringpool-string-count=1334
    D [13/Mar/2010:18:31:21 +0000] Report: stringpool-alloc-bytes=6496
    D [13/Mar/2010:18:31:21 +0000] Report: stringpool-total-bytes=18208
    D [13/Mar/2010:18:31:21 +0000] cupsdReadClient: 13 WAITING Closing on EOF
    D [13/Mar/2010:18:31:21 +0000] cupsdCloseClient: 13
    D [13/Mar/2010:18:31:21 +0000] cupsdAcceptClient: 13 from localhost (Domain)
    I [13/Mar/2010:18:31:21 +0000] Generating SSL server key...
    E [13/Mar/2010:18:32:12 +0000] Unable to create SSL server key file "/etc/cups/ssl/server.key" - No such file or directory
    D [13/Mar/2010:18:32:12 +0000] cupsdCloseClient: 13
    I am guessing tht the "WAITING Closing on EOF" part may be important.
    Other aspects of samba do not appear to be affected. I can mount shares on the remote computers, use smbclient etc.
    Googling is not getting me anywhere.
    Any help will be greatly appreciated.
    Last edited by perseus (2010-03-14 18:54:41)

    I have had similar issues at my office.......I had a hylafax server (also sharing a couple printers via samba) running on debian 5 (samba 3.2) and upgraded it to debian 6 (samba 3.5). and it was samba printer sharing hell after that. What would happen is I would get samba logs full of the same jibberish
    [2011/02/25 15:11:20.201234,  0] lib/util_sock.c:1432(get_peer_addr_internal)
      getpeername failed. Error was Transport endpoint is not connected
      write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer
    [2011/02/25 15:11:20.201249,  0] smbd/process.c:79(srv_send_smb)
      Error writing 4 bytes to client. -1. (Transport endpoint is not connected)
    [2011/02/25 15:43:20.134201,  0] lib/util_sock.c:675(write_data)
    [2011/02/25 15:43:20.134220,  0] lib/util_sock.c:1432(get_peer_addr_internal)
      getpeername failed. Error was Transport endpoint is not connected
      write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer
    [2011/02/25 15:43:20.134234,  0] smbd/process.c:79(srv_send_smb)
      Error writing 4 bytes to client. -1. (Transport endpoint is not connected)
    I only post this here since I think it was more of a samba problem than a debian problem and we seem to be the only ppl out there talking about it......... the getpeername seemed to be the problem (to me anyway) and what would happen on our 25 or so XP home clients is that you would print but it wouldnt go ANYWHERE. Cups was not even recieving the jobs since samba was not passing the jobs to cups.
    It seems to me that the XP machines were not finding the server by its hostname so I messed around with changing the clients to map the printer by ip address instead of by hostname and it helped "some" but it still had big time glitchyness.
    the only conclusion I could come to in my mind is that this reminded me of back in the day when we had a win98se computer sharing a printer and the windows XP systems would hang for up to 2 min while trying to access the printer. The problem back then amounted to win XP not wanting to downstep to the older way of windows98's password encryption. So I started changing my smb.conf to allow guest on the printer, changed the mask to 777 and I even wrote up a whole new smb.conf from scratch to work on security = share no authentication, allow from everyone 777 etc etc.............STILL had problems.
    So I ended up throwing together a new server from a spare machine and installing debian 5.0.3 (with samba 3.2.5) and swapping it out yesterday........now EVERYTHING works fine.
    my educated guess here is that the new samba is probobly geared more towards vista & win7 than it is XP (since XP is a pretty old dog these days). I would loved to have worked this issue out but we just could not have the downtime any longer......so it looks like I am not going to be updating for a long time (which I now is not really the best policy) but it has to work.
    I hope this helps.....trust me you are not the only ones having this problem.

  • Wireless printing is not working

    Hello,
    I have a printer all in one : HP ENVY 4502 (HP ENVY 4500 Series)
    The printer works wireless.
    At the smartphones : it works
    At the laptop (Medion) of my daughter it works : printing and scanning. (Windows 8.1 64 bit)
    But when I want to install it on my laptop of dell with windows 8.1 64 bit it does not work.
    During installation he does not find the printer.
    What can be wrong?

    Addiotional info : when I go to the IP adress of my printer it works on my dell. I can scan but he does not print.
    So my laptop finds my printer and still I can not print.

  • My Epsom Printer/Scanner not working since upgrading to Maverick,??

    We have an fairly recent Epsom SX959WD scanner/printer, which was working fine until I upgraded our MAC Mini. OS to Maverick.
    I did all the further software updates that popped up after installing Maverick, so I'm at a loss as to how to fix it & we really need to use it
    Can anyone help please ???

    Try resetting the printing system:

  • My I message is not working, since IOS 8.3 update.

    My messages is not working properly, since IOS 8.3 update. Message are left hanging as undelivered. When I tap on "try again" nothing happens. Even messages to known contacts with I phones, appear in green and does not get delivered anyway. I have reset my i phone several times to no avail. I like my I phone 6+ as a camera. All other functions are less than impressive.

    Hi iambackbaby,
    In order to help resolve this issue where you are unable to send messages from your iPhone, please follow the directions in the link below.
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • Program not working since 8.0.8 update

    The application has not worked (connected my mac to windows 7 PC) since the 8.0.8 update. 8.0.9 has since been released and has still not fixed the problem. Any suggestions as to what is wrong? I see this is a common issue with other users.

    I am having the same issue and it is becoming a problem for our users as the updated App no longer connects, I have pasted the log from my latest connection attempt below, can you please advise as the current App state needs resolving.  Thanks
    [2014-Aug-11 17:04:45] RDP (0): Final rdp configuration used: redirectcomports=1
    server port=3389
    use multimon=1
    redirectdrives=1
    promptcredentialonce=1
    full address=SRV-WA.OLCHS.LANCS.SCH.UK
    session bpp=32
    prompt for credentials on client=1
    redirectprinters=1
    drivestoredirect=*
    alternate shell=||Notebook
    gatewayusagemethod=2
    workspace id=SRV-WA.olchs.lancs.sch.uk
    alternate full address=SRV-WA.OLCHS.LANCS.SCH.UK
    allow font smoothing=1
    gatewaycredentialssource=0
    remoteapplicationname=Smart Notebook
    use redirection server name=1
    devicestoredirect=*
    remoteapplicationmode=1
    remoteapplicationprogram=||Notebook
    redirectsmartcards=1
    redirectclipboard=1
    span monitors=1
    gatewayprofileusagemethod=1
    gatewayhostname=gateway.olchs.lancs.sch.uk
    remoteapplicationcmdline=
    loadbalanceinfo=tsv://MS Terminal Services Plugin.1.OLCHSApps
    [2014-Aug-11 17:07:01] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Aug-11 17:07:01] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Aug-11 17:07:01] RDP (0): ------ END ACTIVE CONNECTION ------

  • My adobe flashplayer latest version will not work since firefox 7.0 update

    I know there is a problem with this because I have already seen it many times on the internet. Not happy that I can no longer watch any videos since the update. I have downloaded the latest version of adobe. I can see the"flash player" under my control panel but it is not listed in my plugins under the tools/add-ons.
    I also followed the procedure shown on mozilla support to download the add on manager but it did not work either. It does also state on the mozilla website that they are quite aware that this has caused a problem for many. When is this going to be corrected?
    So, I finally went back to Firefox version 3.6 just so I could still see my videos.

    Hello, first update Firefox to v17.0.1 (or in the next days v18) please.
    Are your drivers and DirectX up to date (very important) ?
    Do you have tried to disable Flash Player Protected Mode (since v11.3) ? (that could explain why it is working with Flash Player v11.2)
    Do you have tried to disable Hardware Acceleration (Flash Player or/and Firefox) ?
    Do you have tried to disable all other extensions and plugins in Firefox ?
    Do you have tried to use the Firefox safe mode ?
    Do you have tried to disable your antivirus / firewall programm ?

Maybe you are looking for

  • Install - Oracle 9i 64 bit on Solaris 9 32 bit

    Hi Team, Is it possible to install Oracle 9i 64 bit version on Solaris 9 32 bit OS? Thanks in advance. Regards M.Saravanan

  • BAFF Format - Bank of America Format - Any SAP program to generate it

    One of customers have a requirement to make electronic payments to vendors. The DME file should be in Bank of America format (BAFF). The guide reads : Welcome to the STP Guide for the BAFF Payment file format. This guide has been customized to provid

  • IPhone sync with MacBookPro-- problem with calendar snyc

    My iPhone will not sync calendar items from MacBookPro -- Other things seem to sync fine.  Can anyone help -- I'm missing appointments!!

  • Optimal iMac GPU Specifications

    It seems clear from the chatter on several Apple-related forums that the Aperture software takes advantage of the GPU, not the CPU. If that is true, when I buy a new iMac, should I pay the extra $200 to get the 780m GPU with 4mb of video RAM? Or will

  • Merge documents in Pages?

    How can I merge documents in Pages 6. Actually, I have the same document, but with commentaries and alterations from differents authors, in differents files. I would like to merge all the commentaries and alterations into a new final file. Thanks.