My WLAN chokes when going too fast (Intel 3945 w/ Netgear) [SOLVED]

I recently upgraded my Internet connection from 8/1 to 24/10 and since then I have been able to download at the highest speed without any problems, except for this one of course.
When I'm torrenting and getting higher than 2 MB/s (yes, megabytes) speeds, the connection suddenly "chokes" and puts some sort of threshold on itself at about 150 KB/s. The threshold is not put only on the torrents, but on my entire connection to *this* computer. All of the other computers connected to the router still work fine. This problem doesn't go away unless I reconnect myself to my router. This happens only on Linux, not on Windows as far as I can tell.
What can be the problem? I have Intel 3945 drivers and 2.6.31.
Last edited by skorpan (2009-11-30 21:39:20)

This is *EXACTLY* what has been happening to me; thought I was going crazy. I also have an intel iwl3945 and 2.6.31. My router is a netgear wgr614v6. When I associate from *this* computer, after a seemingly random period of time, my connection gets chocked from the normal ~1.5 mb/s to 113 kb/s. This only happens to this computer, however, it *doesn't* happen over the local network, just to the internet. I can only use my full bandwidth after re-associating with the router. I was thinking it had to be a bug in the router firmware, but this looks like too much of a coincidence now...
what router do you use?

Similar Messages

Title 3d (upwards) goes too fast

I have a title of 23 words in 13 lines of text with an additional 2 lines of spaces after the heading. It goes up the screen too quickly to allow viewers to read it comfortably. I have increased the leading which helps but not enough.
How can I slow it down please? I can't see any parameters to adjust.
(BTW, for reasons too tedious to describe, I am using FCE3 — not 4 as stated in my sig. but if FCE4 has a suitable additional control I could use that if necessary.)

Regardless of which text generator you use, increasing the duration of the clip will slow down the scroll. If it's going too fast and the duration is 10 seconds, try 20 or 30 seconds ... whatever works for the amount of text you have.
Of course, if you are using Title 3D for this (which is kinda weird since Title Crawl was made for this), you'll have to move your ending keyframe out to the end of the clip's new duration.
-DH

Audiobook on my itouch is going too fast.

I just download an audiobook on itunes store and put in my itouch with no problems at all.
But when I play the audiobook (on the itouch), the narrator speaks too fast. And the audiobook is forwarding.. I mean it's going 2 sec per 1 sec..
0:01 to 0:03 to 0:05 to 0:07 and so on...
But when I play the audiobook on my pc with itunes, it's neither fast nor slow, it's just normal.
Someone can help because I want to heard the audiobook with my itouch.
I have the 2nd generation Itouch and the audiobook is Run for Your Life (Unabridged) which last 6 hours 26 mins.

under the ipod's general "Settings" click on "Music" and make sure Audiobook Speed is set to "Normal"

A bug? Photoshop Action Playback is too fast after CS5-CS6 upgrade!! My action wont work

On a PC
I upgraded from CS5 to CS6 (cloud) over the long weekend and I'm now faced with a massive headache. The process actions I use intensively for my work are all foxed by the simple problem that the action playback is going too fast for scripting over two documents to keep up. I have tried everything I can think of but the only thing that allows the action to progress sensibly (as in previous versions of the software) is the step-by-step playback mode. This is too slow to use on an ongoing basis.
The problem is caused by the following sequence
Save as document (on desktop)
Open as document - open as Camera Raw - after settings open in Photoshop
Select All
Copy
Close - saving no
(PS automatically selects previous document)
++++ paste ++++ ERROR Paste command is not currently available
This is where Photoshop should select the previous/underlying document before applying the Paste command. Since the upgrade its been trying to paste the clipboard in the split second after closing and selecting the previous document, and reporting no document available at all. Slowing or pausing the playback with step by step or stop&continue works around the problem but causes workflow to slow down drastically.
Is there a way to script a pause during this one crucial moment? Or is there a preference setting I have overlooked that is casing the behaviour?

Save as - open as camera raw - select all- copy - close - paste. The dance is the ony way I can apply Camera Raw settings such as clarity, noise reduction etc to my retouch after the initial raw conversion. Its a well used technique that I've known about for years. Loads of people use this method in CS6, but for some reason I can'y get it to work after the upgrade.
The action is recorded in the regular record/play type action script. Its a big action and would take many hours to convert into javascript (even if I had the skills). I could possibly use the script recorder plugin but that rules out future tweaks without rewriting everything from scratch. app.refresh and $.sleep sound interesting though... is it possible to incorporate them into the basic action script?

When are the faster i7 quad core (2.7ghz) chips going to ship in the MacBook Pros, Intel announced them over a month ago. Trying to make a buying decision.

When are the faster i7 quad core (2.7ghz) chips going to ship in the MacBook Pros, Intel announced them over a month ago. Trying to make a buying decision.

We can't speculate, when it appears it will appear.
Are these mobile processors? Because that will answer your question right there.

Battery capacity going down way too fast

So problem is that my mbp 13" is about 2 weeks old and battery capacity seems to going down too fast. I only have 2 cycles and I did calibration 4 days ago. When I bought it, it was like 5770 or smth and now it's 5500. Think it's normal or maybe it's just wrong info there?
Battery Information:
Model Information:
Serial Number: W004858Q9D3LA
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 000a
Cell Revision: 0165
Charge Information:
Charge remaining (mAh): 5431
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 5505
Health Information:
Cycle count: 2
Condition: Normal
Battery Installed: Yes
Amperage (mA): -589
Voltage (mV): 12339

It's fine. Cycle to cycle fluctuations of 300-500 mAh are normal.

Why would my video clips be running too fast when played on the monitor panel?

I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
My main question is: "why would my video clips be running too fast when played on the monitor panel ?". This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline. I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline. They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes. I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ? Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips. They are in their original state.
Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
Help would be greatly appreciated.

Yes, that is what the problem was.
Although the video camera on my Nokia N8, mobile was capturing at 25fps,
for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps. Once in Interpret Footage I was able to change the fps to 25.
Thanks for the help.

Intel i915, kernel output if lid opened too fast

I have an Intel graphics card, and acpid set up to turn off/on the screen based on the lid events (with vbetool's dpms ability).
At times, if I open the lid too fast, I get this output if I'm on a tty:
[drm:intel_enable_transcoder] *ERROR* failed to enable transcoder 0
I'm not quite sure what to do about it. Other than having the lid open event sleep for 1 second, that seems to have fixed it for now.
Just wanted to see if anyone else experienced this, had any advice, or thought this should be submitted as a bug report.

I have an Intel graphics card, and acpid set up to turn off/on the screen based on the lid events (with vbetool's dpms ability).
At times, if I open the lid too fast, I get this output if I'm on a tty:
[drm:intel_enable_transcoder] *ERROR* failed to enable transcoder 0
I'm not quite sure what to do about it. Other than having the lid open event sleep for 1 second, that seems to have fixed it for now.
Just wanted to see if anyone else experienced this, had any advice, or thought this should be submitted as a bug report.

I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

After ios7 update my iphone is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing fans like me y they spoil his name ??

after ios7 update my iphone 4 is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing apple have unique and unique fans like me why they spoil their name like this update iam too disappointed iam not say for oppose apple iam say for feedback to grow apple in world because i love apple more please solve it
by real customers
iPhone 4, iOS 7, iam apple suporter

please help me after ios7 update my phone is tooo slowww i want my old iphone

My bookmark menu moves too fast when I try to pick a submenu with my mouse.

My bookmark menu moves too fast when I try to pick a submenu with my mouse.
When I am trying to surf to a website using my bookmark menu and
navigating with my mouse, I click Bookmarks, then a main menu item, and then a submenu item. While moving my mouse from the main menu item to the submenu item, if I happen to stray off the main menu item briefly before I get to the submenu item, Firefox picks the wrong submenu item. I ran a utility program recently to "speedup" Firefox on the internet, but I did not want to speed up the menu operation. Please help me get the menu delay back.

You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

Hi my ipad keyboard is too fast when i'm typing exemple when i type a letter a it look like aaaaaa any adea guys thanks

HI MY I PAD KEYBOARD IS TOO FAST TO CONTROL WHEN I'M TYPING EXEMPLE WHEN I TYPE A LETTER A LOOK LIKE THAT AAAAA ANY IDEAS GUY'S
THANKS

Please explain as I have the same issue - I never know what the receiver gets. I do know that sometimes I get a replied/forwarded email with my message embedded in it and it is huge - I have set my fonts at 14pt for typing. but how an i be sure my clients don't see this huge font?
If you have used Mail > Preferences to set your font at 14pt, that will normally leave the size of the font which your recipient sees up to his own software and settings. Your outgoing email body will not contain any info about font and size unless you have deliberately set them for that particular message in the New Message pane.
In the end, it is not always possible to dictate what your clients see. Their software usually gives them the capability, if they want to use it, to read emails in the font and font size they find most comfortable.
it is so easy to enlarge a rec'd email or a safari webpage, but why can't this be done easily?
What is it that you want done exactly? Sometimes Mail just does not have the features people need. So they use Entourage or Thunderbird instead.

Elements organizer scrolls too fast and jumps when an image is selected?

Why does elements 12 organizer on new mac scrolls too fast and jumps all over?

I have found this to be a problem as well. Like other products, the scroll speed should start slow, and only speed up if the user moves the cursor further outside the panel.
Vista on Dell XPS 710.

Why my mac book pro is so slow with internet when my PC is going so fast?

Hi, I recently bought a mac book pro, with OS Maverick, 8gb RAM, I core7. I'm using WIFI and it's running so slow to connect to hotmail, or send an email. It's happening the same with an easy search in google. It's like the mac is thinking.
At the same moment my old PC is going so fast that I'm a bit disappointed.
Can somebody have an idea of this problem, please?

Hello there, Marol03.
The following Knowledge Base article offers up some great recommendations for troubleshooting Mac running slowly:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Recording iSight Video plays back too fast in Adobe Presenter/Office 2010?

Adobe E-Learning Suite 2.5 installed over Microsoft Office 2010 Home and Student
Running Presenter within PowerPoint detects and records using iSight. But the Playback is too fast, chipmonk like.
Perhaps its an FLV codecs issue.
Running Bootcamp 3.2 Software on Windows XP SP3 on an Intel iMac Core 2 Duo 2GHz 1,5GB Ram

Hello,
Do you mean that when you see the video inside Video Creator, slide 10 appears for a split second and then jumps to slide-11?
Can you record the same scenario in diagnostic mode and send us the logs.
Follow these steps -
1. Close Video creator if it is already opened
2. In Windows > Programs > look for "Troubleshoot Adobe Presenter Video Creator"
3. Launch the same and record the exact same steps
4. Stop recording > Ensure that the issue has been reproduced.
5. Close the application.
6. While closing, it will prompt you to send us an email with collected log reports.
Kindly send the logs. We will go through it and get back to you.
It will also be great if you can send us the presentation in which the issue is reproducible.
Regards,
Mukul

My WLAN chokes when going too fast (Intel 3945 w/ Netgear) [SOLVED]

Similar Messages

Maybe you are looking for