My wondrous 160GB iPod classic, part 2.

Halfway made it out of the first problem, and now I believe I have a new one. After resetting and putting my iPod into disk mode and connecting it without iTunes pulling up, I've been watching my screen flip between the "Do not disconnect" screen and then the screen with the apple insignia for a few hours now. When I first unplugged it as soon as the "do not disconnect" went away to show me the apple, it told me to restore my iPod via iTunes. However, all it does is go right back to telling me not to disconnect while iTunes doesn't pull the device up, or recognise it as a device if that's correctly putting it. Anymore tips or suggestions?

See Corrupt iPod classic.
tt2

Similar Messages

  • My wondrous 160GB iPod classic these days.

    Up until a few days ago, I was able to sync my iPod with my new HP laptop with no problem. Then, I started not being able to sync my whole library at once, Now, iTunes freezes up whenever I connect the device, and then wonderfully works when its disconnected. and its listed as a Removable Device under my computer, instead of itself. Any and all suggestions? I'm running Windows 8. I've got about 71 GB of music on my iTunes, if that matters any. It also says that I have 148 GB used up, yet there's no music pulling up to show for it. I've tried manually resetting it to no avail, also. I put it in disk mode, then it said to restore the iPod via iTunes, but I can't do such a thing if iTunes locks up every time I plug my iPod in. Thanks for taking the time to read this if it pulls up to anyone sooner, rather than later.

    See Corrupt iPod classic.
    tt2

  • My 160gb ipod classic won't sync to itunes on a mac (I've tried everything)

    Just got a 160gb ipod classic off of craigslist. The slate grey one.
    It says "connected eject before disconnecting" on the ipod when I plug it in and nothing shows up in itunes.  Every once in a while the "sync" circulating arrows start up, then stops and goes back to the plug symbol.
    It isn't available under "devices".
    I updated itunes, I restarted my mac, I put the ipod into and out of recovery mode (while plugged into itunes and on it's own), and still nothing.
    Everything on the ipod works perfectly fine.
    One thing to note, is the ipod is completely full. It has like 3kb of free space. Could this be part of the problem? Is there any way to delete directly off the ipod not through itunes?
    Is it possible that it's formatted for windows and needs to be reformatted for mac? If so, how do I do that?
    Please help!

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • How can I Replace a Hard Drive on a 160gb iPod Classic?

    How can I Replace a Hard Drive on a 160gb iPod Classic? I am considering buying an iPod Classic off of eBay which is described as 'broken' and having the 'Red X' showing up on the screen. The seller is starting the bid at a very low price, which raises some concerns for me. For this thread, let us assume that the iPod has a broken hard drive that needs to be replaced in order to function properly. I am assuming that merely 'restoring' it would not suffice. How would I be able to replace the hard drive myself, without bringing it in to a store? I have never fixed an iPod's hardware before, nor a computer or any electrical device. I am a novice at such things. Would I be able to fix it myself without wasting money on a broken iPod and new hard drive? Please provide instructions on how to do so =)

    Hello there,
    Yes, the red X icon is usually a sign of a bad or damaged hard drive. Sometimes, restoring the iPod will resolve the issue, but rarely. Other users were able to smack the ipod against the side of their leg and gain back full functionality of the iPod.
    However, if no such luck with either, your next option would be to replace the drive. For this task, you can either opt to repair and replace the hard drive yourself, or opt to send it into a third party repair business to do the job for you.
    I use the guides at [www.ifixit.com|http://www.ifixit.com> to help me replace broken parts on an iPod. These guides provide excellent step-by-step instructions as well as photos on how to repair any part from an iPod.
    Some other good sites for purchasing repair parts include the following:
    [iDemiGods|http://www.idemigods.com>
    [RapidRepair|http://www.rapidrepair.com>
    [iResq|http://www.iresq.com>
    Lastly, I would also like to remind you that ebay also has several great deals on excellent iPod replacement parts. It's where I purchase a majority of mine.
    Hope this helps.
    B-rock

  • Windows Vista not recognizing my new 160GB ipod classic

    I'm having a terrible time getting Windows Vista or itunes to recognize my 160GB ipod classic (ipod software version 1.0.3 PC). I've spent the last two days going through the 5 Rs (4 or 5 times, now)... updated all the USB drivers... reassigned my slave drive letter to make sure there's no conflict... nothing is working.
    The ipod is seen in the Device Manager as an "unknown device", but that's it.
    The "USB Mass Storage Device" and "Apple ipod Controller" are listed under the "Universal Serial Bus Controllers" and all drivers are up to date.
    When I try to update and install the driver for the "unknown device", it automaticly searches windows and the internet, but finds nothing. When I point it towards my C:\Windows\System32 folder (as suggested elsewhere) it locates a driver... but encounters an "unknown error" when installing.
    Absolutely nothing works! I'm not new to itunes, ipods or working with Windows Vista. This is terribly frustrating as I now have a $350 paperweight! Ironiclly, I just sold and sent off my 5g 60GB (WORKING!) ipod, too!
    Ugggggghhhhhhhh!!!
    Please, please, please help!

    Update: (Not that anything is fixed yet)
    Deleting infcache1 (as suggested elsewhere) had no effect... nor did moving around the usbappl.inf files forom the file repository as described here: http://teknobabble.wordpress.com/200...er-a-solution/
    Vista just keeps asking for a driver and when I point it towards one... runs into an error when intalling. The hotfix provided adressing this exact issue (http://support.microsoft.com/kb/940199) hasn't worked nad I get an error saying "This update doesn't apply to your system". O Rly!?! Hmmmm... Windows Vista 32... exact same error when mounting my ipod. Sure SOUNDS like it SHOULD!
    Tried this fix: http://support.microsoft.com/kb/925196/en-us but actually found the CD/DVD upper and lower filters in a different key: HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}. Still no joy, though. Starting itunes just gives an error message saying it requires the registry entry to burn CD's and asks that I re-install itunes. Attempts to connect prior to reinstalling (since it still runs) have no effect.
    Tried restarting itues service http://docs.info.apple.com/article.html?artnum=307078 but it just hangs. Reinstalling and restarting has no effect.
    It just kills me that I can see the ipod connected in the Device Manager ("unknown device") and in Computer Management/Storage/Disc Management ("Rmovable Disc 1" with 148 GB).
    So frustrating. This is the first problem I've run into with Vista that has stumped me for more than 24-hours and has really got me feeling stupid.

  • How can I make my brand new 160GB iPod Classic work?

    I bought a 160GB Ipod Classic in January and have just tried to use it for the first time and it has been a disaster! I have spent hours trying to use it and failed. I have been using iTunes for some time now and have recently successfully set up Squeezebox to use the iTunes music I have uploaded from my CDs.
    All started well - my system recognised the new hardware and iTunes started. I registered and said I wanted to synch my music and my photos and away it went. After 2-3GB of uploads I got an error saying
    "The Owner's iPod cannot be synced. The required folder cannot be found." On pressing 'OK' it then said I'd got an unknown error. Pressing 'OK' again took me back to the first error message. I then tried everything I coould including relaoding iTunes and eventually got it started again. This time it got up to about 8GB (of about 10.5GB) before abending in the same way. Since then I have failed to take another step forward in many hours.
    When I connect the iPod to my PC sometimes it appears briefly in 'My Compter' then disappears. Then the errors loop thus:-
    START:The iPod itself says "Connected" the a few seconds later it says "Ejecting"
    The device manager has a USB Mass Storage Device with an exclamation mark on a yellow background which then says
    "Windows cannot use this hardware device because it has been prepared for'safe removal' but it has not been removed from the computer (code 47). To fix this problem, unplug the device from your computer and then plug it in again"
    Doing this the causes the process to sytart again from START above.
    On one occasion only, after a few hours trying, I got a message "Your iPod need to be reformatted to work with Windows" and it opened up iTunes and then sat and did nothing.
    Running the diagnostics in iTunes says "No iPod found". The diagnostic information is set out below:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    To Be Filled By O.E.M. ALiveSATA2-GLAN
    iTunes 7.6.1.9
    QuickTime 7.4.1
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Apple Mobile Device 1.1.4.7
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number xxxxxxxxxxxxxxxxx
    Current user is an administrator.
    The current local date and time is 2008-03-14 21:39:45.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA GeForce 8800 GTS
    NVIDIA GeForce 7600 GT
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 7.6.1.9 is currently running.
    iTunesHelper 7.6.1.9 is currently running.
    Apple Mobile Device service 1.14.0.0 is currently running.
    Universal Serial Bus Controllers:
    VIA Rev 5 or later USB Universal Host Controller. Device is working properly.
    VIA USB Enhanced Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    iPod classic running firmware version 1.0.2
    Serial Number: xxxxxxxxxxxx
    <Edited by Moderator>

    Have solved my own problem. My PC sits on the floor so I have a four-port USB hub on my desktop with one port in use. I use one of the other three ports for USB-related task. As I was shutting down for the night I had a - what turned out to be inspired - thought about whether there was an adequate power supply from the hub. I then tried the iPod USB connection directly into the front of my machine and everything worked. It seems that an inadequate power supply was the cause of this strange set of conditions.

  • I have a 160GB iPod classic. How do I get my HD movies from itunes to this iPod?

    I have a 160GB iPod classic. I have HD and 1080P HD movies purchased through itunes. How do I get them to my iPod classic? It has plenty of storage. It gives me errors that make no sense to me. If making an error message, why can't they be more specific? The error messages unknown error occured (-50) audio and because they cannot be played on this iPod, "The Bourne Identity" was not copied because the video format is not supported by the iPod. I'm tired of buying 20 different versions of this and 20 different devices to play items I've purchased. Can anyone help with this issue please?
    Thank you.
    Henry

    Hello Henry,
    Thank you for the details of the issue you are experiencing when trying to sync your movies purchased through the iTunes Store to your iPod classic.  I found an article with some useful information:
    The iPad and iPhone 4 can play High Definition (HD) content and Standard Definition (SD) content. iPods and the original iPhone, iPhone 3G, and iPhone 3GS can play Standard Definition (SD) content. To find what video formats are supported, see the Tech Specs page, click your device's product family, and then your specific model. All HD purchases from the iTunes Store also include an iPod/iPhone-compatible Standard Definition version to accompany the HD version. When syncing an HD purchase from the iTunes Store, iTunes will automatically sync the SD video for devices that require SD content.
    You can find the full article here:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    http://support.apple.com/kb/TS1497
    You can download the SD version of the movies from your list of past purchases.   You can find the steps to do this in the section titled "Apps, Books, Music, Movies, or TV shows on a computer" in the following article:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune w

    Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune  y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada.  Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar,  he buscado para ver si tiene errores  el disco del Ipod y me dice que esta bien.  Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo.  He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien.  Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo.  Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema. 
    I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.

    06-sep-2012 0:14 
    Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune  y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada.  Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar,  he buscado para ver si tiene errores  el disco del Ipod y me dice que esta bien.  Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo.  He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien.  Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo.  Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
    I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
    iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA 

  • Has Apple addressed poor sound quality issues with new 160GB iPod classic?

    I just bought a new 160GB iPod classic, replacing a perfectly good 80GB iPod Video (5.5), thinking that the newer one would be superior to my 3 year old model. I discovered that the sound of the new unit was flat and muddy compared to the older model. I found that the 5th gen iPod video was more "spacial", if that's an appropriate word to use; the bass was more present and more clearly defined, as was the rest of the sonic spectrum. I searched several forums to research this issue and while there were numerous references to this issue, all of the posts I found referred to the original iPod classics (80GB and 160GB) and not the later 120GB classics nor the new 160GB classics like the one I bought. Has Apple done anything to address this issue since the first classics were released or are the new ones still suffering from the same sound quality issues as the original classics?

    Based on your observations here, they apparently have not changed the sound quality since the original 160GB classic. I noticed a clear narrowing of the sound stage (ambiance) between the 5.5G 80Gb and my 6G 160GB. You're describing the same characteristic. I don't own the newest 160GB version and came here today to see if it might have improved the sound quality back to the 5.5 spaciousness. Note that the 5.5G has a higher signal to noise ratio than the 6G, making it difficult for me to enjoy it through efficient balanced armature in ear monitors like the Shure SE530s or Ulimate Ears Triple.Fi 10s.

  • Suspicous HD sound on new 160GB iPod Classic

    Hi there,
    yesterday I bought one of the new 160GB iPod Classic to replace my old iPod Photo. After loading some music I noticed that the harddrive is really loud and makes disturbing sounds (spinning, clicking and chattering, obviously HD sounds) whenever I switch to the main menu or start playing albums.
    Ok, I know that Hard drives do make noises while operating but what disturbs me is the volume. You can hear it even when the iPod is lying on a table one meter away and it is considerably louder than my iMacs working volume for example. In comparison my 4 year old iPod Photo is really silent, I have to put the iPod to my ear to hear the HD sound - the only times I heard a HD sound of this kind is whenever my old iPod froze/the HD crashed and I had to reset it. So whenever my Classic starts to spin its HD I think it's gonna freeze/crash and it freaks me out.
    I contacted Amazon (where I bought it) and they told me that HD drive noises are normal and that I should contact Apple.
    So, is this normal or a case in which I should try to get a replacement from Apple?

    Amazon kept claiming that this ipod HD is not defective, still I returned the iPod to them using my right to return any item within 14 days of purchase. With the refund I walked to a local electronics market and bought their last iPod Classic 120GB (with a 25% discount).
    Now the sound difference becomes even more obvious to me. The 120GB's HD is considerably more silent than my former 160GB (no high pitch, you can't hear the HD spining unless you put it to your ear, the HD clicks is not lounder than pressing the click wheel). The iPod I originally got must have been a flawed one. I can't imagine that Apple unleashes such an unconvenient product on its customers as a regular item. I'm eager to know if more buyers of the new 160GB complain about the HD sound and if a production flaw (?) of new HD modell is repsonsible for it.

  • Can I use my old accessories for a 40GB (4G) iPod with new 160GB iPod Classic?

    I just purchased a 160GB (7G) iPod Classic. I had been using a 40GB (4G) iPod.
    The male connectors on  the accessories I used with my 40GB iPod seem to fit into the female connector on my new 160 GB. So, I am wondering if I can use these old accessories with my new 160GB iPod Classic. The old accessories I used with my 40GB (4G) iPod are as follows.
    1) Wall charger made by Apple. It has a firewire connection at one end of the charger cord which connects to  the small white plastic box of the charger that plugs into the wall. The other end of the charger cord seems to fit my iPod 160GB Classic.
    2) Dock made by Apple. It uses a firewire connection cord to my computer, in contrast to the USB connection cord that came with my 160GB iPod Classic.
    3) Car chargers that worked with my old 40GB, 4G  iPod. The car charger connectors seems to fit my new 160GB iPod Classic. One car charger is made by Apple. The other is not made by Apple.
    So, could you please tell me if I can use any or all of these old accessories with my new 160GB Classic without damaging it.
    Thanks.
    Richard

    No.
    Stedman

  • Brand New 160GB Ipod Classic Not Responding to USB 2.0 connections Why?

    I bought it online from Apple as a Christmas gift back in September. It charged succesfully using a wall charger but when connected to Windows PC's and Laptops(also running windows)neither computer recognized the Ipod as a connected device. The Ipod itself did nothing when connected. It showed no error screen nor did it begin to charge as most do when you connect them to a PC. What is seen on the screen is all the different menus you have to choose from like music, video and what not. All the stuff your supposed to see. I have no idea why it is not being regoznied by any PC unless it is incompatable with USB ports. If that's the case what am I to do about it? Aside from not connecting to PC's it appears to be working fine. The preloaded games play as they should and it does nothing out of the ordianary. Wall chargers work with it but attempted connections to PC's with USB 2.0 ports garner no response from the device. Any help would be greatly appreciated.

    I had difficulty making my 160GB Ipod classic recognized as a device by my PC. I pushed and held down the menu and cener buttons for a bout 5 seconds. The apple logo appeared and ever since then my computer sees it as a device and it works as it should.

  • New 160Gb ipod classic will not be see in in Itunes V11.3.1(2)

    I bought a new 160Gb Ipod classic. I bought it because my previous 2, older ipod classics, stopped syncing. One day they worked the next they didnt. I swear this happened after an Itunes update too. Anyway, I took one to Tekserve (local Apple service provider) and they told me one of the pins in the ipod i brought to them was damaged so the connection couldnt be made. I didnt really buy the answer, but since the ipod was older i figured, ok, I'll get a new one. Well I just got a new one. opened up the box, took out a new USB cord, plugged it into my computer and boom, NOTHING. The computer recognizes it in the Finder (MAC OS 10.6.8). Then again the MAC recognized my other 'broken' ipods too, Itunes just doesnt.
    So I had hunch before this this problem has to be a software bug. Now its confirmed. There is no way a brand new ipod should not be seen in Itunes. Trust me i tried all the normal 'Ipod doesnt sync support stuff' and it doesnt  solve the problem. This is an advanced problem and one that i need  real answer on. Does an ipod classic work with Itunes  V11.3.1(2) running on a MAC 10.6.8 OS? Ipod classics still cost $250 which is ridiculous since the technology is 5 years old, so if Apple stopped supporting them on the new Itunes without making that know I think there should be some serious press about this!
    Please help.

    Well I finally figured out the problem, not thanks to anyone from Apple for that matter. You would asume this problem has happened before and is still happening. The problem was I couldn't copy certain songs anymore from iTunes to my iPod Classic. When trying to copy certain songs I got an error.
    If you have this problem it means your song file is corrupted. You can simply check this by trying to copy it from your hard drive to an external hard drive. Here you will also get an error message.
    This means you need to replace all the corrupted files by a back up on your hard drive or download it again. I did this and now everything works fine.
    Hope this will solve a lot of problems.

  • 160GB iPod Classic not recognized by iTunes

    just got a new 160GB iPod Classic today, and I had no problems at first. when I was nearly finished syncing about 5500 songs to it, I accidentally bumped the dock, causing it to disconnect. i plugged it back in, and it started syncing my whole library again from the beginning. this time, something happened that caused iTunes to freeze up on my PC, so I had to restart.
    I'm now left with my iPod that has only 480 songs on it, and iTunes will no longer recognize it. I had tried to update the firmware to 1.0.3 but that failed. I have the latest version of iTunes. my PC has recognizes the iPod as a separate drive as usual, the problem seems to be with iTunes.
    help anyone?

    This is a problem caused by 10.10.2, only way to fix it at the moment is to revert to 10.10.1.
    Quite a few threads on it on other sites and only that one solution. Make sure you raise a feedback to apple though.

  • My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!

    My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!
    I've had this from new for 2 years, the battery life is excellent and lasts for days so I know it's not a power issue as it was fully charged that morning. No signs of connection in itunes, it's not showing as a connected device.
    Can anyone please help?

    Hi gscoops,
    Welcome to Apple Support Communities.
    You may find the steps in our iPod Troubleshooting Assistant helpful:
    http://www.apple.com/support/ipod/five_rs/classic/
    Best,
    Jeremy

Maybe you are looking for

  • Overriding attributes in ABAP objects

    Hello, I currently want know if it is possible to override attributes in ABAP objects. i know it is possible with methods. I have extend a previous class functionality and want to change the refrence type of an attribute from the parent class, but on

  • Anyone added a  modem to M4000  / SUN M5000 servers  - via xscf  or other ?

    Hi, Have any of you lads attempted to add a std analogue modem to an M class server, on older sun boxes the procedure is clear [ dedicated serial port, use tip with standard settings ] But for modern servers, cannot find any documentation on sunsolve

  • MSI Source path

    Hi! What Im trying to do is that i want a variable rather then the real UNC path to my MSI-package. Atm i have point out \\server\vol1\app\app.msi to all my msi-zenapps. What i want is \\%APP_SOURCE%\app.app.msi. What i have tried to do is this: 1. I

  • Wrong Driver for Live! 5.1 digit

    I am trying to install my Soundblaster Li've! 5. digital after a re-install of WXP. I found Li'veDrvUni-Pack(ENG) as the one I should try (I lost the CD). I get the message "Setup could not detect any Sound Blaster Audio card on your system." Who kno

  • How to get eLive in my Dutch Version Adobe Premiere 13?

    How to get eLive in my Dutch Version Adobe Premiere 13?