My work changed its Domain and now my mail will not load.  How do I change this?

My place of employment changed its domain this morning.  I am able to change domains on my iPhone and iPad, but not on my Mac.  Now my account will not work.  I tried deleteing the account and recreating it, but it still does not work.  Any ideas?

Went into Settings - Mail - my work account - Domain.
Don't see a Domain listing in the Mac Mail program.

Similar Messages

  • HT1750 I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

    I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

    Don't know.  Could be any number of reasons.  Re-read the how to install RAM manual again for your model iMac.  Double & triple check to make sure you purchased the right RAM chips.   Make sure they are seated properly.  If you didn't hear a snap when seated, the RAM is not properly seated. 

  • How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
    Please try each of the following, in order, until hopefully resolved:
    Note the following are excerpts from an OS X Daily article.
    * Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
    * Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
    * Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
    * Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
    * Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
    * Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
    * Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
    * Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
    * Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
    * Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual.

  • HT4718 OS Maverick on my MacBook air  and now my Mail will not open -  what do I do to correct this

    I have just today installed OS Maverick on my MacBook Air and now my Mail will not open All i get is an error message - 1712  -  what do I do to correct this please

    Please provide your operating system details along with the version of PS you are trying to download.
    If possible, paste a screenshot of the error that you get on Creative Cloud desktop app. FAQ: How do I capture and post a screen shot or video?
    ~ Arpit

  • I have changed the CPU on my pc and now Potoshop Elements10 will not load.

    I've just updated my computers CPU and changed the clocks and BIOS so that I could run Premiere Elements 10. This went ok And Adobe are going to update this program .
    BUT the problem I am having now is that the Photoshop Elements 10 won't load an it's saying that Iv'e got it loaded on 2 computers and that one must be disabled or the program wont run in so maney days
    I have not changed the hard drive and only have one copy loaded on the drive I have tryed to cotact Adobe about this but am having trouble with that, and thought someone may have had a problem like this.

    As this is a user to user formum mostly, only adobe support can sort out activation problems such as yours:
    http://www.adobe.com/support/download-install/supportinfo/

  • Just downloaded 10.7.2 on to my macbook pro and now my safari will not load pages.

    I just upgraded from Snow Leopard to Lion...10.7.2 and not my safari will not load web pages...my interent is working fine...the safari acts like it is trying but generally cant load them.  every once in a while it will be able to load a page.  My other web browser is having no problem so this is specific to Safari.  any advise would be greatly appreciated.  thanks

    You supply little pertinent about the MBP and the iPhone.
    First... on the MBP... Click on the Apple icon.. Top left in Finder...
     > About this Mac > Version...what does it say?
    Which iPhone and what is its' iOS Version.

  • Airport utilities does not recognise windows 7 and will not load, how do I fix this?

    Airport utiltiy will not load, it does not recognise windows 7 and I get an effor message telling me that it requires XP  or vista etc.
    I have deleted and reloaded Airport Utilities, Bonjour and Itunes to no effect. Help!

    well...i go only to the site "Test it here: http://java.com/en/download/help/testvm.xml". After this i was able to go to a site with the title "Java Downloads for All Operating Systems" and here you download your JRE for your OS. For XP or Win 7 it was a java 6 update 29-b11. The file to install is named '''jxpiinstall.exe'''. After install an restart you go again to [http://java.com/en/download/help/testvm.xml testvm.xml] and see that the java plugin works fine.... (see the screenshot)...
    cheers
    marco

  • I just upgraded to iTunes 10.6.1 and now my library is not loaded, how do I get it back?

    I upgraded to iTunes 10.6.1 overnight and when I start it now
    there is no media loaded, no songs, no films and no TV Shows.
    I have tried starting using the shift key to point iTunes back to my library location,
    but still no luck.
    Has anyone got any ideas??

    warren.b.paul wrote:
    So, I have managed to fix the problem.
    I found that the upgrade had replaced my library files with empty ones.
    So I restored the backup I made of them before the upgrade and
    now all my media is back.
    Great..
    For those who run across this therad and haven't taken the effort to make a backup here is another approach that should work.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • I've just updated to iOS 5.0.1 and now the ipad is not recognised, how do I correct this?, I've just updated to iOS 5.0.1 and now the ipad is not recognised, how do I correct this?

    I've stoped and restarted the AMDS but no change (this worked when I had the same problem with the iOS 5.0 upgrade), what should I do next?

    I had this symptom but adding +1 to telephone numbers nor the *228 reprogram worked. I found the solution in a kb article and documented the solution here:
    How to sync Contacts after iOS 5.0.1 update
    ..Mike . Silver Spring, Maryland, USA

  • I have an iPod Touch 4 and former apps I had on there are now gone and new apps that I've purchased will not load.How do I fix this?

    Do I have to get a new iPod to fix the updates of these apps?

    Hi there Skatermom14,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

  • I updated my software, now my email will not update, how do I fix this?

    I cannot get emails on my iphone 4 after I updated the software to the latest one.  I tried to re-enter my passwords but that did not work, still get no email. HELP

    try deleting the account and re-adding it.

  • I have just loaded my iLife disc and now my iPhoto will not open

    I have just loaded iLife 11 which I have had for over a year and now my iPhoto will not open, how can I overcome this problem.

    I have just loaded iLife 11 which I have had for over a year
    You mean, you reinstalled iLife from the iLIfe '11 installer? If your current iPhoto library has been edited using a newer iPhoto version, you need first to update to the latest version you used. Update from the -menu > Software Update.
    Then try again to launch iPhoto.
    now my iPhoto will not open, how can I overcome this problem.
    If updating to the latest version does not solve this, explain exactly, in what way "iPhoto will not open". What is the error message, and what is your MacOS X version?

  • Directx 11 and now Premiere CS5 will not work.

    I finally got my ATI 5770 working with Directx 11 and now Premiere CS5 will not work

    I just installed what I thought was Directx 11.  The latest file update I downloaded is only 9. dxwebsetup.exe from Microsofts web.
    I have a Dell XPS 8100.  I was on the phone with AMD/ATI, DELL, and XFX.  Dell said the card was an ATI, and AMD/ATI said that ATI now just makes the chips.  I tried Sapphire ATI 5770 and they didn't work, then I tried a program the took off all the drivers and I got the Dell drivers from the web, thinking that they are on OEM and with the DP Adapter, I finally got the 3rd ATI Eyefinity monitor to work. I tried Cuty of Duty and it worked for a couple of minutes.  I'm not into games, but I like the three monitors for learning software. One monitor is the video training and one is the software and the other is the Internet or an ebook.
    Now Premiere doesn't like anything. I tried going back to one monitor, and different resolutions. I had two monitors working at one time on this computer. I like the Time line monitor window on it's own monitor and the rest of Premiere on the left monitor.
    I was reading that Premiere likes 1280 x 900. That is not a mode on the ATI 1280 x 960 or 1280 x 1024.
    Could it be the latest Directx it installed or the fact the Display Port is in the card?

  • I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty

    I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty and been able to resolve it?

    Did you try deleting the mail account, then adding it back?   I've read a lot of times that is what needs to happen in order for it to work properly.

  • I updated to iOS 6 on my iphone 4 and updated my macbook pro with and now my mail is not working at all on my iPhone.  I can receive/send on my laptop, but not my iPhone!! Can someone help?

    i updated to iOS 6 on my iphone 4 and updated my macbook pro  and now my mail is not working at all on my iPhone, whether on wifi or 3G.  I can receive/send on my laptop, but not my iPhone!! Can someone help?

    Which email provider are you using?  If it's Gmail, try unlocking your account here: https://accounts.google.com/DisplayUnlockCaptcha.

Maybe you are looking for

  • Error connection using  JCO.Client :null

    Hi, I have small doubt in JCO connection, can any one help me. In WebDynpro  application some time we are getting exception like Error connection using JCO.client : null. Connection :200 we are maintained in JCO configuration. If I call one RFC usein

  • How do I create a new alert sound?

    In OS 9 it was obvious how to create a custom alert sound, but I don't see how to do it in Tiger or Snow Leopard. Any suggestions?

  • Deleting from 2 different tables

    HI, i have a Database with 2 tables that are identical. products (main product table) products_update (every morning this one is fill automatically with the list of products) So i need to insert/update/delete the products add and update works fine <c

  • Views not created in Oracle.

    The Migration process did not create views in the oracle schema. The access source database has 60 queries. There are no errors in the error log about view creation. As I understand, the migration process should convert the queries in access 2000 as

  • I have problem to connect wifi in Mavericks 10.9.2 on Macbook Pro with 15 days use.

    I can not connect to wifi, I bought my macbook for 7 days. Please, we need an urgent solution. Thank you