My work phone number has an extension. Can I input the number so that it pauses and then dials the extension?
My work phone has an extension. Can I input the number ito my contacts so that it pauses and then dials the extension?
Please see thread https://discussions.apple.com/thread/4329335?start=0&tstart=0
Pause and Wait doesnt work wiht Iphone 5 with ios 6.0
Similar Messages
-
ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase
ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase
-
I can't find a plug in that i downloaded and put in the library/audio file when I'm in garage band
I can't find a plug in that i downloaded and put in the library/audio file when I'm in garage band?
In GarageBand 10.0 and GarageBand '11 are the plugins (Audio Units) installed in
/Library/Audio/Plug-Ins/Components/
What is the GarageBand version? Not all plug-ins are compatible with the newest version GarageBand 10.0
The version number is shown in the "About panel" in the main menu bar: GarageBand > About GarageBand
If you are having the newest GarageBand 10.0, the Audio Units will show in the panel in the Smart Controls of the Track you selected.
Scroll the "Info" pane down all the way or enlarge the Smart Controls pane by dragging the dividing line to the track area upward, until you see theAudio Unit Brick.
Most panes in GarageBand 10.0 can be scrolled. If you do not see the scroll bars, they will appear automatically, when yous start scrolling. Or enable them permanently in the System Preferences > General > Scroll Bars. This is useful, as long as you do not know yet, which panes have hidden items that will need scrolling, to make them visible.
The Smart Controls need to be enabled in GarageBand Preferences >Audio Midi.
Some Audio Unit plug-ins will no longer work, since the new GarageBand 10.0 is a 64-bit only application; the 32-bit plug-ins are incompatible.
See this document: GarageBand for Mac (v10.0): Unexpected behavior with Audio Units plug-ins -
Can I save a keynote presentation in Power Point and then use the power point on my Macbook?
My library has a Toshiba TW 650 projector that is used by PCs. I am going to be giving a presentation created on Keynote.
My DVI-VGA connector did not work for my 2009 Macbook to the projector. Can I sve the Keynote presentation to power point and then
show the presentation on a PC with the Power Point version?Hello redffox,
You can export the project to a .PPT file as outlined here: Keynote '09: Creating a PowerPoint slideshow http://support.apple.com/kb/ht3698
To create a PowerPoint slideshow:
Choose Share > Export, click PPT (PowerPoint) and then click Next.
Type a name and choose a location for the file, and then click Export.
Additional Information
Note: PowerPoint doesn’t support some Keynote features:
Some bulleted text items may be lost. If you hide the bulleted text on a slide (by deselecting Body in the Slide inspector), it is deleted from the outline when you export.
PowerPoint doesn’t support alpha-channel graphics, so if you use a photo cutout frame, the image behind it will appear in front. You may also notice slight variations in other graphics.
Cheers,
Sterling -
I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?
Double click home button, then swipe up on app picture (not the icon itself)
-
how can i hold a spot in a clip, let the audio continue for a moment and then resume the clip and audio together?
you want to use the retiming tool. you can select what you want to hold, then use the "Hold" command (shift-H) to create a single frame of a default duration, which you can then change to whatever length you want by dragging the retiming handle.
Here's the page in the help manual that describes the hold feature in detail:
http://help.apple.com/finalcutpro/mac/10.0/#ver4c2173c9 -
Tonight opening Numbers caused a 'free update available box' advising me to install the latest version of OS X and then download the latest version of numbers. 'OK' is the only choice.
I can't force quit Numbers or even shutdown the iMac.
I don't want to lose the spreadsheet (90% completed so far) or upgrade to Yosemite.
I have OS X 10.9.5 running on a 2014 iMac.
What to do?
Thanks.NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe -
In other words, does the AirPort Extreme NEED to be the device connected to the coaxial cable, or can I connect that cable to the Motorola SBG6580 DOCSIS 3.0 cable modem/wireless gateway? (My Internet provider requires DOCSIS 3.0 for speeds above 12 megabits/sec.)
Will the Airport Extreme "program" the Express via an ethernet cable, and than the cable can be removed?
The "bridge" or "repeater needs to be quite a distance away from the physically connected cable modem/wireless gateway and the ethernet- connected AirPort Extreme, and we have wall-to-wall carpeting, and the walls and ceilings are off-limits (family politics), so a looooong ethernet cable is out of the question.
Any help is GREATLY appreciated!
Thanx!
P.S. The 802.11 in my house (ground floor, about fifty feet away from the modem; in the living room about 35ft away *****! And Motorola touts this wireless gateway as having amazing coverage (360, I think they call it),but in fairness, this house is old and has a 5 hanset cordless landline and a microwave and a fan, etc., etc., etc......See if find a solution in one of these discussions:
Best bets to extend/boost signals from Airport and AP Extreme
How to extend and Extreme network using Express -
when i turn my macbook pro it has a black screen and it beeps 3 times in succession with a pause and then repeats the beeping and so on.
If you replaced the Ram in your machine at any time, you may not have been aware of the fact that Apple computers have always been a little picky when it comes to 3rd party Ram. Apple computers have always run very well on 2 different brands.
Memory for iMac 2GB, 4GB, 8GB, 16GB, & now 32GB - OWC Certified RAM for Apple iMac with Lifetime Warranty
This first link is from other world computing and none of us on these forums to my knowledge have heard of any bad ram from either Other World Computing
or Crucial Ram.
Crucial Ram
The only difference I am aware of is that Crucial offers a download and will tell you exactly what Ram your computer is capable of using and the prices that are available.
Resolving Kernel Panics
HOPE THIS HELPS IN SOME WAY
DON -
My phone started resetting today over and over and then shows the icon to plug into itunes. When I tried plugging in, a message pops up saying that itunes can't connect because my phone has a passcode and i need to unlock it to connect. my phone won't let me do anything more than make an emergency call. it wont give me the option to enter my passcode to unlock the phone. What can I do?
After a visit to the apple store, they were able to get through my pass code but unfortunately I found out that is was a problem with the logic board. Since Apple only wants to sell and not fix, I was able to locate an iphone repair near me that deals with logic boards and they are currently working on it right now. i should be getting it back soon. Im not sure if the problem you are experiencing is the same as i went through but it does sound like it may be also a hardware issue and would suggest searching online for an iphone repair place that can diagnose what exactly is wrong. Hope this helps.
-
Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.
Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.
-
My phone has been smashed I need to get records of all my iMessages and texts from the last month. How do I get these?
Do you have a backup of your iPhone which contains these messages?
If so, you can restore a new iPhone from that backup during setup.
If not, the messages are gone. -
My iPad screen has gone black. I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again. I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using. Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't. It has not been dropped and has been in a case for years! Please help!
When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...
-
I merge projects in aperture, it works fine until aperture restarts. After aperture restarts, the projects are no longer merged, and are back the way they were. Can anyone suugest how to make the merge permanent?
I tried the first aid tasks but the issue is still there. I have more info now though. It's not a problem with merging.
The problem is that new projects are being generated everytime aperture starts (with the same name, ie 01, 02.... and 01 (1), 02 (1) .....)
When aperture start, it shows "importing". When I click on importing, it goes into the activity box. In the activity box, has many lines as below. The added projcts are all empty. It's annoying because i have many useless projects being generated. -
I just purchased an iPhone 5 and my phone has many duplicate contacts on it. I want to edit my contact list that's saved on the cloud and then replace the contacts on my phone with the edited list. I have spent hours but no success yet.
Okay
So when you edit in iCloud you are not seeing an update on your iphone?. I just did a test in iCloud.com and it changed my iPhone contact list in less than 1 second. So iCloud is functioning fine.
If you delete all the contacts on your iPhone and if you are properly synced they will all be wiped out on iCloud.....ugh! So let's not do that...
Your plan should be to make all the changes in iCloud and have them flow down to your iPhone. That sounds what you are trying to do anyway.
So. if you delete a contact in iCloud or edit a contact in iCloud then you are not seeing the changes on your iPhone?
If so then they are not properly synced..... but I wonder how you have any contacts in iCloud.
Let me know if you are seeing any changes, if mot then we can review the syncing set-up.
Cheers
Maybe you are looking for
-
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "startin
-
2010 Macbook constantly crashes after update to Mountain Lion
Here is the problem report: Interval Since Last Panic Report: 113393 sec Panics Since Last Report: 8 Anonymous UUID: 6C81E16E-40AA-50A7-1144-D99B8CBFB282 Thu Dec 27 17:58:56 2012 panic(cpu 3 caller 0xffffff7f831b6b25): NV
-
Doubt in Making IDOC as External Def
Hi, I have imported the IDOC From R/3 to XI ( IR ). If i changed the Occurence of one segment say 0unbounded to 01 by exporting the IDOC into notepad and imported as External def. Q1) Is ther any problem that having the 0--unbounded occurence at R/3
-
What is a web filter and why is it prevetning me from using firefox?
Firefox allows me to search on google but as soon as i click the next link/to go on the page i want is doesnt work. Instead it talks about a web filter saying that the page i tried to visit could not be checked by web filter. This also happens when i
-
How to get temperature status by wmic
Greetings I'm trying get temperature status from our server but I can't. I know that something is wrong in the command. Someone could help me get this info? wmic got this info: C:\Documents and Settings\Administrator>wmic /locale:ms_409 temperature N