My World blue blank screen,apps don't work

I wrongly updated OS6 in my Bold 9700, phone didn't work well when I realised I downgraded software to latest version OS5. Since then, when I try to access info in Myworld about an App the screen goes blank, I can pres the menu key and it gives the option to download but then I see nothing. I have no problems with some apps,but facebook just doesn't work at all. I download it but it doesn't give me the option to 'run'. In the application list it appears,so it is in the phone but there is no icon. Other apps (such as bank apps) don't work either,they show 'error 'net.rim.device.api.ui.container.GridFieldManager not found'.
I have done a security wipe, deleted and reinstalled all apps including Blackberry World. I have reinstalled software about 4 times,battery pulls...you name it.
I have data allowance with O2, but the phone is an unlocked AT&T Bold 9700 brought from the States.
Any tips on what else can I do?The phone used to reset itself when I accessed My World,it seems it stopped doing that now, but still can't see anything when I want to see an App info. Thanks!! 
Solved!
Go to Solution.

Hi and Welcome to the Community!
A few things to try, in order of "less destructive" to more-so:
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
I suggest that you clear the AppWorld application cache:
1. Open App World
2. Go to My World
3. Follow one (and only one!) of these steps:
3a. For keyboard-based BB's -- Hold down the ALT key and then press, in sequence R, then S, then T
3b. For Touch Screen Only BBs -- Hold the num-lock (!?123) button so it locks and then press, in sequence 3, then 4, then (
3c. For newer (e,g., OS6 and 7) BB's, see this KB:
KB24714 How to clear the BlackBerry App World cache
4. AppWorld should close.
5. If your BB locks after issuing the cache clear, perform a battery pull reboot
6. Return to AppWorld/MyWorld (it may be sluggish while it re-synchronizes).
If step (4) does not happen as listed, then the clear cache did not work.
128268 wrote:
 'error 'net.rim.device.api.ui.container.GridFieldManager not found'.
Given that, it's possible that the OS loading did not go well (for one reason or another). Consequently, you might want to do it again.
At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Help w/ fixing my broken ipod touch. I have to double click on an app in order to open it, can't leave the home screen, apps don't work!

    I'm not sure what happened, but I can't leave my home screen unless I press n hold an app and move it to another page, then when i press the home button so the apps stop shaking I can stay on another page. Other than doing it that way I can't scroll from one page to another. When I click on an app a thin box appears around it, not only with apps but when I click on the time or battery or ANYTHING! In order for me to open any of the apps I have to double click on it and then when it opens I can't do anything in the app. Even when I went to settings to see if there was something in there to fix this problem I can't go anywhere or do anything. Someone please help!!!

    Im having this same problem an my phone is about 3 weeks old. I am not sure about the voice over part though...I have not yet figured out how to work the voice recognition part of the phone...I am such a newbie with this phone. I did the power off/on suggestion, several times. I tried leaving it off for 10 minutes. Tried to reset with the power on/off and home button pressed at the same time. Charged battery. Still makes no difference. You cannot scroll any direction. Have to double click to open apps. Have to double click letters when texting or emailing in order to get the letter in the text box. Can scroll through app choices, have to click on the line with the dots in it and move from page to page. Can't access the settings - > general - > accessibility - because it won't allow me to scroll down to "general".
    Anyone help you with your fix yet?

  • TS3274 When i turn ipad on, there's a dark blue blank screen

    Ipad 2 ran out of battery, put it onto charge, came to it this evening, and nothing there except a dark blue, blank screen.
    Tried holding 2 buttons for upto 40 secs - no change.
    Screen changes colour from off (black) to blue shade when home button pressed.
    Otherwise, nothing.
    Worked fine last night.

    Has the unit EVER been jailbroke?
    If "No," first try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • After update iOS 8 some of the apps don't work please help me

    After update iOS 8 some of the apps don't work please help me As fast as you can

    There can be some of that. Unfortunately, it's up to the app developers to make their app work with the iOS.
    So checking for updates can help. You can also look at the reviews for the app, see if others have the same issue. If 8 has broken the app, all you can do is wait.
    In some cases, a reset can help. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again. (this can work if the app is fine with iOS8 but is just glitching...it's a harmless reboot of the system)
    Another thing to try is to force quit the app(s) and force them to reboot. Double tap the home button. Flick the preview for the app up and off the screen to close it. Then single tap the home button to exit the mode. Try your app again. If it's just a glitch then this sometimes clears it up.
    I know once I updated my devices I then had several updates pushed out - updates that required iOS8 so weren't available before the update.

  • After upgrade to os 4 some apps don't work including Apple Store

    Upgrade went ok, but took long time. Some apps don't work correctly or crash. e.g. Apple Store app just recycles back to main screen. Starbucks app works for a few seconds then crashes.

    I had same problems.
    I decided to "downgrade" back to OS3. You can too!
    Go to this thread and read about it. http://discussions.apple.com/thread.jspa?threadID=2473976&tstart=0

  • IOs5 on iphone 4 apps don't work?

    Just installed ios5 on my iphone 4 and now my apps don't work.  Tap on an app and it just flickers and nothing happens!

    Flickers then back to main screen?
    Do you have excessive background apps running?
    You can try this app: RAM doctor lite, might help if your iPhone actually ran out of RAM, no guarantees.

  • All Mac apps don't work after cloning on new hd.

    All Mac apps don't work after cloning on new hd.
    I used CCC to clone 10.6.8 then onto new drive. Everything works BUT all Mac apps.
    Error: You can't open the app(s) because it is not supported on this type of Mac. (On MacBook 2011)
    Thanks for your help.

    All good. Just drag and dropped each application and they worked until I did a restart. Then repaired permissions and everything works.

  • My apps don't work after synching music files from my PC

    My apps don't work after synching music files from my PC through Itunes....though all the apps are shown in the Apps window in Itunes (The Apps match the iTunes account on the iPhone).....
    Disconnecting after the sync and After downloading any app from Appstore through Wi-Fi all my apps start working.....
    Please Help.....

    What happend is your phone forgot it was authorized to work with items associated with your apple id. If it happens again, download any free app to prompt the sign in, once you install the free app the others should work.

  • Apps don't work after being installed

    I loaded several apps Saturday and on Sunday apps don't work.  Afraid to "reset" phone.  any ideas?

    See here for...
    Troubleshooting applications purchased from the App Store
    also, you will not lose any data or setting with a Reset or a Restart
    Restart / Reset
    http://support.apple.com/kb/ht1430

  • Screen Painter don't work

    Screen Painter don't work when I click menu "Tools/Screen Painter", and show a System Message :Add-on Screen Painter is disconnected.Please contact:www.sap.com
    Restart Add-on
    Log off the current company
    Continue working without this Add-on.
    What should I do?

    Hi
    First uninstall Screen Painter then open the file C:\Program Files\SAP\SAP Business One\AddOnsLocalRegistration.sbo
    in notepad remove the lines related to screen painter (If there is any)
    <AddOn Exe="BK_ScreenPainter.exe" Installer="ScreenPainterInstaller.exe" InstallerMD5="384B6B18CA81A26CD8CC2A160BBBFC0A" Name="Screen Painter" Path="C:\Program Files\SAP\SAP Business One\AddOns\BK\Screen Painter" SelfUpgrd="false" Space="BK" UID="BK_Screen Painter" UnInstEstTime="180" UnInstParams="/zu201Duninstallu201D /x" UnInstaler="ScreenPainterInstaller.exe" UnInstallerMD5="384B6B18CA81A26CD8CC2A160BBBFC0A" Ver="880229"><Common ID="1" Name="B1DEVSRV"/></AddOn>
    save it and try again to install the screen painter.
    If that doesn't work  go to this C:\Program Files\InstallShield Installation Information directory and find find the screen painter installer and remove it.
    Hope this will help you
    Regards
    Arun TB

  • After software update (Sept. '09) apps don't work and some missing

    Plugged my phone in and itunes said there was an update I needed to install. Did that then it said there was a problem with the phone and it needed to be formatted before itunes could read it, did that too. Then while it was syncing up again after formatting it kept telling me there was a problem and items could not be found. All downloaded apps, some are missing completely from the phone, are no longer working. HELP!

    expresso3 wrote:
    yes i am fully aware of that!!!
    This "i do not see an update when i connect to itunes!!!!" suggested otherwise.
    the post says "after software update (sept. '09) apps don't work and some missing"
    there has been no update in sept 09!!!!
    Perhaps the OP doesn't connect the iPhone to the computer very often.
    Phil

  • After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected

    After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected.
    Windows of Swing apps don't display all GUI elements.
    After replacing System/Library/Java from a Time MAchine Backup, everything works normal again.
    Is this update corrupted?

    "avoid using Java in a web browser at all,..."
    Good advice.
    "...old Java apps/applets that aren't written to modern specs ..."
    The stand-alone Java Swing applications, that don't display their GUI elements after installing this update, have been written according to modern standards. With Oracle Java7, and with Java6 from Apple prior to this update, they run absolutely flawlessly.
    This is absolutely Apple's fault.

  • What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

    What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

    Make sure your apps are updated.  You might try Settings > iTunes & App Store > Automatic Downloads - Updates = "On".
    You cannot go back to an old operating system.

  • I updated to ois 4.3 and now my apps don't work

    I updated my 3rd generation ipod to the ios 4.2.1 and now half my apps don't work. How do I get back to where they do and is there some way to fix this bug?

    - First try resetting your iPod.  Nothing will be lost:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Some users have said installing a new app resolves the problem.  Thus, I would try purchasing a free app.

  • I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

    I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

    Follow the directions here:
    http://support.apple.com/kb/HT2109

Maybe you are looking for