My wreak while I met my read Using Laptop away from external hard drive.

In one location, I use my laptop connected to an external hard drive. My iTunes folder and most of the music files are on the external hard drive. When I try to open iTunes at another location (without the external HD attached) I get an error message which says "Be folder iTunes cannot be found or created and is required. The default location for this folder is in 'My Music' folder." I would like to be able to open iTunes on the laptop without being connected to the external hard drive. Is this possible? Can my set up be configured so that some of my files are on the laptop HD, others on the external HD and perhaps also use a network drive. Of course right now I'd settle for just opening iTunes while I'm at my remote location. I've tried reinstalling and repairing the iTunes program well not connected to the external HD. I thought of on installing iTunes and then reinstalling that while not connected to the external HD. I must admit I'm afraid to do this without advice from someone more knowledgeable than me. Any help would be greatly appreciated.
Gateway Laptop Windows XP Pro External Hard Drive

I have gone ahead and uninstalled and reinstalled the iTunes software, restarted the computer etc. I still get the same error message and cannot open iTunes.

Similar Messages

Using Time Machine from external hard drive to start using a new MacBook

I recently totalled my MacBook (white) and am now looking to replace it with a second hand MacBook. I have an (un-totalled) external harddrive and have been using Time Machine to keep everything backed up. I found a second hand MacBook at a reasonable price but it runs OSX Tiger, whereas my old one ran Leopard. So my question is, will it be possible to plug in my external harddrive and restore everything, including the operating system, on this new (used) MacBook, or should I be looking for one that runs Leopard?
Many thanks for reading!

You can restore from Time Machine using Leopard or Snow Leopard only. What I would do if I were you is buy either of the MacBooks, but make sure you get a Snow Leopard install disc--either a retail one if you buy the Tiger MacBook, or the install disc for the pre-loaded software on the SL MacBook.
Use the SL install disc to completely erase and (re)install Snow Leopard on the MacBook. Since your Mac will be second-hand, you should fully erase it and start fresh, just in case there are some nasty little malwares left behind or other problems the original owner didn't want to deal with.
After the install, use Migration Assistant to get your data off the TM drive.

Help reading a .txt file from the hard drive....

Hi guys,
Ok... I need to know how to read a .txt file from the hard drive... I have an example on how to read from a disk, but I don't have a disk drive. I could be confusing terminology, but I don't think I am. Here is the code I have for reading from a disk.. please let me know how I should change it to read from a hard drive.
Also, when the error pops up, it says that it can't read another .txt file that is not specified in the code... any ideas how that is occuring? Please advise.
import java.io.*;
public class TEST {
public static void main(String args[]) throws Exception{
FileReader fr = new FileReader("customer.txt");
BufferedReader bfr = new BufferedReader (fr);
String s;
while ((s=bfr.readLine())!= null){
System.out.println (s);
fr.close();
}

Ok... I need to know how to read a .txt file from the
hard drive... I have an example on how to read from a
disk, but I don't have a disk drive. I could be
confusing terminology, but I don't think I am. Here
is the code I have for reading from a disk.. please
let me know how I should change it to read from a
hard drive.The code will be the same, regardless of where the file is located. It's just the filename that will be different.
Also, when the error pops up, it says that it can't
read another .txt file that is not specified in the
code... any ideas how that is occuring? Please
advise.Probably becuase the class file (compiled version of the source code) is a different version to the source code, i.e. the source code hasn't been recompiled since the source code was changed.
How does this relate to EJBs?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

How do i change read/write permission on an external hard drive?

how do i change read/write permissions for an external hard drive?

If, on the otherhand, you are trying to write to a drive that is formatted NTFS (for Windows), and can't.
You have two choices...
1. Reformat the drive. Either Mac OS format, if you are using this only on your Mac. Or ExFAT, or FAT 32 if you intend to use it on both a Mac OS computer and a Windows unit. note: ExFAT is not suported by XP.
2. Install one of the drivers necessary for the Mac to write to a NTFS volume. Unless you want the experience of having the support for this being one that is sporadic, avoid this. I used to be a strong proponent of NTFS-3G, until I started having the problems with Lion, that many users warned us about. Go this route only if you find you must use NTFS on your drive. Paragon and Tuxtera are the sources for these.

I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? One I back everthing up on the TC, can I delete everything off of my MAC?

I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??

Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
TC was designed to backup your Mac. The TC literature is pretty clear about this:
If your Mac's hard drive has a problem....it will sooner or later....you can use your backup on the TC to rebuild your Mac.
But.....if you move all of your data to the TC from your Mac....you only have one version of that data now, and it is on the TC.
Have you thought about what will happen when....not if....the TC has a problem? Since the only version of your important data was on the TC, and the TC has failed......you lose all of your data.....because you have no backup.
A much better plan would be to add a USB or FireWire hard drive and connect it directly to your Mac. Move the data on your Mac over to the hard drive.
Then, the TC will backup both your Mac and the hard drive. So, you have original data on on one drive and backups on another drive.
That would be a minimum backup plan. Most of us have more than one set of backups.

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive?

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive? Thanks!

Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

I'll stay in this chat ... I answered in the other one ... I have a Sony digital Handycam ... from years ago. I just got the LaCie and I think I formatted it for only to be used on my Mac ... how should I go about reformatting it to be HFS Extended like you said?

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.

HT1751 My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used). ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used). ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help! The backup files consist of 34,000+ songs; almost all burned from my own CD collection. I do have most of the songs on an ipod classic but hesitate to try to restore from that. Can someone tell me how to get these 34,000 songs to show up in iTunes? Thanks!!

This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
tt2

Retrieving data from hard-drive - using it as an external hard-drive

Hi, first post here. Really hope you guys can help me out
My mac died over the christmas holidays (the motherboard fried from a water accident) and consequently I cannot get access to all my music and pictures on its hard-drive. I know the hard-drive is still functionable because an employee from a mac reseller store managed to retrieve as essay I desperately needed for it.
What I want to know is how I can remove the hard-drive from the mac and how i can use it as an external hard-drive so I can retrieve all of the information from it into my new laptop - which is a windows I'm ashamed to say (money is tight!). Also, would the fact my new laptop is windows affect whether i can move the data from the mac hard-drive to it?
Hope you can help, I need those pictures!
Chris

Hey Robot and sorry for your lose -
Here's a video to get your drive out: [Video to get Drive out|http://www.youtube.com/watch?v=uuyi-NWLLz4]. You'll need to go through the the point of removing the EMI shield with the T8. Then put the drive in a a 2.5" SATA enclosure and hook it up to your new notebook.
Good luck to you -GDF

How to use the ipod as external hard drive???

I went to the windows explorer page and checked under my computer and saw my ipod as the "E" drive. Is the procedure of storing files, be it word or excel or photos as simple as dragging them into the ipod E drive location???
I have tried doing this and they seem to have been copied into the ipod, however when I checked into the ipod they were not there...anywhere. I highlighted the "ipod(E)" drive and created a new folder named "my documents" and then dragged some word files into it. I then detached the ipod from my computer and checked the ipod for the files and the new folder "my documents" and could not find them.
When you use the ipod as an external hard drive are all the documents and files you drag into it hidden???
Is there any way to view word documents?? How do you store them?
When using the ipod, is the only viewable information that comes up onto the ipod screen, info from the "itunes" page??
cheers
ipod 4th generation....20g Windows XP
Windows XP

You can't view any of the files on the iPod while using the iPod. You can only see them through the computer. I guess if you want, you can put the files into the "Notes" folder on the iPod and see them using your iPod, but you can only open .txt files up to 4kb big.
eMachines(POC); 3rd Gen 40GB iPod, 4,000 songs on the dot! Windows XP Pro

Using Current Windows-based External Hard drive on Mac

Hello,
I have a MacBook Pro now. I have BootCamp installed with Windows Vista. Working fine. I also have a Western Digital 160 GB external harddrive with data on it from my old Windows only computer. In other words, it is formatted with NFTS.
I want to be able to do one of the following things:
1. Partition the external drive in half so I can use half of it for new Mac data while keeping my old Windows data
2. Seamlessly use the external drive as is between Mac OS X and Windows being able to transfer data. Right now, if I boot into Mac OSX, I can see the drive on the desktop and actually see the files and folders. But if I try to drag anything to the drive, I get permission denied.
Any hints here? Basically, in a nutshell, I am going to have data from both Windows and Mac OSX that I would like to save on the same external hard drive
Thanks.

You won't likely be able to make one hard drive with two different partition types if it is already partitioned (partly anyway) in Windows in NTFS. Mac Disk Utility won't deal with the unpartitioned space AFAIK.
It cannot hurt to try in Disk Utility and see if it shows the 60GB only or refuses to mount at all which I suspect will be what happens.
Anything but My Book is the answer (I have seen at least a dozen My Book complaints here) - normally with macs there are a few trusted makers and one interface - firewire (NOT USB). I use LaCie drives - 3000GB worth - and for portable I have an OWC, they make very high quality cases and drives and nice and small.
I have a few others that I do not rely on like a 320GB USB drive that was $100 and the drive inside is worth more than the whole external drive actually cost which is why I bought it. And a small USB Maxtor for use with Parallels since Parallels won't see Firewire drives.

My mac will not properly read the iphoto library on external hard drive. It only reverts back to the library on the computer instead.

I have an iphoto library on an external drive, which I have connected to my airport extreme. I can see the disk in my finder and access data on the external hard drive through the wireless, local network. The only problem is that when I use my iMac, the machine does not read the iphoto library on the external harddrive, instead it picks up the library that's on the iMac itsel. Is this a preferences list issue or something else? Any help would be great, thank you.

A strong warning: If you're trying to edit the Library (that is, make albums, move photos around, keyword, make books or slideshows etc.) or edit individual photos in it via Wireless be very careful. Dropouts are a common fact of wireless networking, and should one occur while the app is writing to the database then your Library will be damaged. Simply, I would not do this with my Libraries.

OS X Mavericks doesn't read my usb, sd and external hard drive

Hi all,
I am using Macbook pro (Mid 2010) and recently upgraded to OSX 10.9.3. Since switching to Mavericks, I have problems with using USB, SD Card and External hard drive (Freecom Classic II). The outcome is random. Sometimes, I am able to use it for a while and then it suddenly goes away (from the finder) or it mounts and fades into grey and then disappears.
I did read through the forum and followed PRAM resetting. However, it works for the moment and when I restart or try to use these devices again (days later) I end-up facing the same issues with USB, SD and EHD.
I checked all these devices in my PC and Ubuntu. All of them works fine.
Any directions?
regards,
Martin

Might be corrupted Finder preferences ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.finder.plist
Click Go then move the com.apple.finder.plist file to the Trash
Restart your Mac then go to Finder > Preferences > General
Make sure External disks is selected.

My wreak while I met my read Using Laptop away from external hard drive.

Similar Messages

Maybe you are looking for