My wrt 54g router won't connect to the internet

I'm unable to even get an internet connection with my router, so I cannot access the router configuration settings page. I already made sure that the ethernet cables weren't the problem. I hook the cables up as instructed, but can't get the internet connection. I'm running Winows Vista Home Premium and according to my ISP (cable service), the ISP settings should already be set up to connect automatically with the router. It's a used router (not new) and I've already reset it several times........Help would be appreciated. 

Bypass the router and connect the computer directly to the modem. make sure that you can access the Internet directly through the modem.
Connect the modem to the Internet port and computer to the Ethernet port on the router.
Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
Check the IP address on your computer. You should get the valid IP address like 192.168.1.xxx.
Try to ping the router IP address 192.168.1.1.
If you get replies from the router IP address then try to access the setup page of the router.
Follow this link to configure the router with Cable Internet service.

Similar Messages

  • WRT54G won't connect to the Internet

    I'm hooking up a new router, a WRT54G, version 6. During setup, it won't let me connect to the Internet. I get to the part where I change the admin password, and each time I try to connect, I get a message that tells me that my cable/dsl router won't connect to the internet, to unplug and try it again. I do that, but it never works.
    Thanks in advance!

    Hi! Here's another way to configure:
    Setting-Up a Router with Cable Internet Service
    Setting-Up a Linksys Router for DSL Internet Connection

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    Thanks for your response
    Let me give the history - I started with an Apple Express being fed thru a D-Link  EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
    Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
    A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
    Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
    Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
    Got up and running easily with Comcast help and with the modem connected directly to a computer.
    Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
    However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
    I have gone thru all of the combinations of powering down/ up, but all stays the same.
    I can live with what I have but something still doesn’t seem right.
    Thanks again

  • My macbook won't connect to the internet even though my router/connection is fine

    Two days ago my computer was fine. Since yesterday it won't connect to the internet. I've been in touch with my service provider and determined that my router is fine and everything is correctly connected. I've rebooted my modem, restarted my computer, taken dhcp offline and put it back on, repaired disk permissions... Not necessarily in that order but nothing had work. Does anyone have any suggestions?

    We've determined, then, that you use your cable rather than wifi for your signal. Approach this in an organized way:
    1. ISP. Check your ISP's webmail to make sure you can send and mail email using the webmail interface. If you can, that means your ISP can still send and receive emails - if only on webmail. Useful if your normal email is malfuctioning, like now.
    2. Modem. Unplug and reconnect your modem, and make sure the connection is snug.
    3. Cables. Make sure all of your cables and plugs are connected; it's easy to disconnect an ethernet cable while cleaning, or after random kicking.
    4. Connection wizard. Go to Mail/Window/Connection Doctor, and take down the results.
    Most of the time, you can trace the problem after following these steps. If there's still no luck, provide detailed info on your results.

  • MacBook Pro won't connect to the internet after standby

    Hallo all,
    I have the following strange problem with my macbook pro:
    - after going in stand by and returning in operating mode the mac won't connect to the internet, I have to follow the procedure in order to retry to connect but It does'not work. Go in network preferences, try to change the DNS, use and not use DHCP and so on but nothing change.
    - Mac is working in ethernet, I can see other macs and pcs
    - When I change the network to connect, same problem even if I turn off the mac.
    I have the same problem with Iphone !!!!
    I have linksys router and modem but I think that the reason could be a setting in mac.
    Anyone can help me???

    I tried re-installing Mountain Lion 10.8.3 but it didn´t help.
    Assuming your can access email ok ?
    First, install the OS X Mountain Lion Update v10.8.4 (Combo)
    Then restart your Mac. That will reinstall any missing system files.
    Then try Safari.

  • My iPod Touch 2nd generation won't connect to the Internet

    After restoring my iPod Touch 2nd gen to factory settings because that's what iTunes advised me to do after doing the iTunes update a week ago, my iPod won't connect to the internet anymore. I was able to connect to our wifi but it won't go to any website, to iTunes, etc. I'm 100% sure the problem isn't our wifi because I'm using it right now with my laptop so it's not the wireless problem. Before restoring my iPod to factory settings iti has always worked and I never had a problem connecting it. I tried restoring it again but it still didn't work. I already also reset our router but still no luck. I wish someone could help me asap!! Thank you.

    You can try:
    - reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off an then backon your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

    Hello, I hope somebody can help.
    I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
    I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
    When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
    But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
    I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
    What could the problem be?

    99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
    Ring your ISP and make doubly sure you have exactly the correct username and password.
    If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
    In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

  • My airport extreme shows a green light, but won't connect to the internet.

    I have an airport extreme, and it stopped working one day, so I reseted it and it's not connecting to the internet now.  It's showing a green light, however, it won't connect to the internet. I live in an apartment complex, so I don't have a cable modem. The router is directly connected to the wall via ethernet. I had the ports checked by connecting the ethernet cord directly to the computer, and the internet is working fine. I tried resetting the router, but it still doesn't connect.

    Your problem is typical Yosemite network.. just reboot the Time Capsule.. no luck reboot the network.. do a restart in correct order.. modem.. wait 2min.. TC .. wait 2min.. clients.
    No luck then do a full reset of the TC and setup in a way that Yosemite can cope with.
    Start from a factory reset. No files are lost on the hard disk doing this.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 for basestation and TCwifi wireless name.
    If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
    2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
    Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
    Same thing applies to the Airport Extreme or the Express if used as router.. just replace TC in the instructions with AE.

  • TS1398 my ipad is connected to my wifi network but won,t connect to the internet, i have tried resetting network settings but it still won't work.

    my i pad is connected to my wifi network bt won't connect to the internet I have tried resetting network connections. it will connect to the internet from my phone hot spot

    Try restarting your WiFi router by removing power to it for 30 seconds.

  • Safari won't connect to the internet (but computer is)

    Today,
    None of our Macintosh (by Apple) devices will connect to the internet. Actually, only Safari says it won't connect to the internet.
    If I run Terminal on our Macbook, I can ping yahoo.com, google.com, etc... Also, Skype works just fine. However, when we run Safari, no web page will load and we get the error screen saying that the computer is not connected to the internet. Running diagnostics (forget where it's located on the computer) says we are indeed connected (which I could tell from Skype and pinging).
    Coincidentally, neither our iPhone or iPod can get to any web pages on Safari when connected to our wireless router. Using 3g network they access web pages fine. Our PC has no internet troubles today whatsoever.
    Any idea why Safari doesn't work? Unfortunatley we don't have Firefox or Chrome on our Macbook to test it out, not sure how to download those without being able to access their respective web pages.
    Thanks!

    Try turning off the router for 5 minutes, then turn it back on.
    Restart your Mac as well as the iPhone and iPod.
    If that doesn't help, on the Mac, go to /Library/Preferences/System Configuration
    Move all the files from the System Configuration folder to the Trash.
    Now on your iPhone and iPod tap Settings / General / Reset / Reset Network Settings
    See if Safari will load pages.
    If not, on your Mac, go to System Prerferences - Security.
    If the Firewall is turned on, turn that off. Restart your Mac, Try Safari again.
    Since you can access the net with 3G, it's got to be your Wi-Fi.
    System Preferences / Network / Assist Me is where you find Diagnostics.
    Make sure all the light are green. If not, click Continue.
    iOS: Troubleshooting Wi-Fi networks and connections
    AirPort troubleshooting guide
    AirPort Quick Assist
    --  When you post for help, please tell us which Mac OS X you have installed. Thanks!

  • Spotify won't connect to the internet?

    At the moment, Spotify is the only internet-based programme on my laptop that won't connect to the internet. I've tried everything that usually makes it work, e.g. logging out of Spotify and logging in again, turning off the internet via my laptop and switching it on again and turning the internet off via the router and a plug... but nothing seems to be working at all. Spotify for Internet servers like Google Chrome work but not for desktop. Why?

    Spotify does the same here. Device Android HTC m8 mini 2.

  • Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work.  Any ideas without needing to reset the ipod?

    Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work.  Any ideas without needing to reset the ipod?

    - Have you tried when connected to other networks?  Maybe the router is blocking the ports used by Safari and the other apps.
    - What kind of network are you using? a personel or bussines?

  • Linksys WRT54G2 V1 won't connect to the internet

    So I had my router all set up for awhile and then the other day my dad reset it and now for some reason it won't connect to the internet. I tried re-doing the setup but there was no luck. Linksys WRT54G2 Motorola DSL modem Model # 2210-02-1022 Bellsouth is my provider If anyone can help please do.

    Welcome to the Cisco Home Community.
    Double check your configuration if you've followed setting up your router with your DSL connection correctly.
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=96&vw=1&articleid=3687
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • My Apple TV Won't Connect to the Internet!

    My Apple TV won't connect to the internet. Everything else in my house does! I've unplugged everything twice and restarted everything twice and still nothing. Any suggestions?

    Make sure router is up to date
    If on wifi try ethernet
    Make sure DNS is set to auto (setting - general - network)

Maybe you are looking for

  • Why does iTunes keeps coming up empty even after successfully restoring from a previous library?

    So, the other day, I opened up iTunes to find that all of my music and movies (all media at all) was gone. Well, darn. I looked in my previous saved libraries and the most recent file was from a minute or so before I discovered the problem - so, an e

  • Can i use swing under JSP?

    i have a JSP, now my question is, can I display swing components under JSP?

  • Adobe Reader crashes when using search feature in OSX

    Every time I try to use the search feature of Adobe Reader in OSX, it stops responding and crashes.  Please help.

  • Short run time

    Hi all, I have wrote and modified this code. There's no error in the code, but I am having hard time of fixing the run time. It runs only up to maximum of 350 iteration. I wanted to run until I receive a true value; before it gets there it just says

  • Managing iPad and iPhone, 2 accounts, 2 PCs

    Here's the deal: I have a personal iPhone with an account managed thru iTunes on my home PC (Vista). [Personal account] I've recently been appointed as the "keeper" of a shared (5 others) iPad with a separate account managed thru iTunes on my work PC