My WRT310n won't work with my Appl Mac Mini and iPhone

Previously I had a weak signal using my WRT54G router. I usually got one or two bars in the house on my iPhone or Mac Mini. I recently "upgraded" to the WRT310N and now I cannot connect wirelessly at all on the mini and only one bar on the iPhone even with the phone inches away from the wireless router. I know these are both G devices, but I didn't expect performance to be worse than with my $49 54G router. Any suggestions?

Are your wireless settings still on auto? Try using the wide radio band with standard channels 1, 6 or 11.
The box said windows xp or better... So I installed Linux!

Similar Messages

Will a external Apple iSight work with the latest Mac Mini?

with a firewire 400-800 if it will what software do i need to take pictures and videos.
Many Thanks

Will a external apple isight work with the latest mac mini.
Yes (if the external iSight works.)
External iSights are great webcams, but they are getting old (as consumer electronics go) and some have had pretty rough treatment. You can test yours using the suggestions from this page:
http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
I suggest you disconnect other Firewire devices until you get your external iSight working with your mini.
If you do not already have an external iSight and are considering buying one now,
a new webcam (with warranty) may be a better choice.
Many available alternatives are listed here: http://www.mac-compatible-web-cam.com/
THEMACMINIMAN wrote:
with a firewire 400-800 ...
Use one of the following ways to connect your FW400 external iSight to a FW800 Mac port:
• To use the FW400 6pin-6pin cable that comes with iSight, you can use a 6pin-9pin adapter
like one of these:
http://tinyurl.com/ydsbb6m&emsp; (I use this one.)
http://tinyurl.com/cgll7o
http://www.sonnettech.com/product/fw_adapter.html
• This Firewire 400-800 cable can work:
http://store.apple.com/us/product/TP320LL/A (I use this one.)
• Some report that this low-priced alternative cable works:
http://www.newegg.com/Product/Product.aspx?Item=N82E16812189097
I suggest you disconnect other Firewire devices until you get external iSight working with your mini. Once iSight works when it is the only FW connected device, you can try connecting other Firewire devices to determine whehter you can use any of them without conflict.
... if it will what software do i need to take pictures and videos.
With your 10.6.3 mini, you can use QuickTime X, iChat, Photo Booth, iMovie, and some of the other apps that are installed with OS X. Your Mac's Help for each of these apps can tell you how to use them with iSight (or other connected cameras.)
Some more apps you can use are shown in this list:
http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
The web links for each app gives details on what functions is offers with your webcam.
Many Thanks
You're welcome.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Will a Saittek Eclipse usb keyboard work with an Intel Mac Mini?

The Saittek Eclipse is my favorite keyboard.
Anybody know if it will work with an Intel Mac Mini.
Box only says Windows, but I'm just wondering if everything except volume controls will work fine? (it is also illuminated, with a light level control, but I'm guessing this shouldn't matter with Windows vs OS X?)

I am a writer though and a photographer (strictly point and shoot) for a couple of orgs. I just don't want o run out of space. And I hate!! slow response time.
Is the i5 adequate as well?
Glad to have found an Apple guru so quickly. May very well buc you more in the future.

Which USB external MODEM will work with the latest MAC MINI?

Can anyone recommend an external USB modem (other than Apple's) that will work with the latest MAC MINI?
Thanks!
Captain

Hello!
I am very happy with the APPLE USB MODEM "MA034"
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=ap ple%20usb%20modem#overview
You cannot find smaller and it never crashed or anything whatsoever.
Oh yes, and it is white!

Will my 5 year old lg flatron monitor 1730S work with a new mac mini ? thank you.

Will my 5 year old ( hardly used ) LG flatron monitor 1730S work with a new Mac Mini ? Thank You. Robert.

You don't say what sort of Inputs it has available, but if VGA, DVI or HDMI then yes, you might need to buy an adapter of some type though ...

Graphite base station not working with my Intel Based Mac Mini and iPhone.

My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: Soriano

I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps.

I'm trying to set up Continuity with mac mini and iPhone 5s and not working

I'm trying to set up Continuity with mac mini and iPhone 5s and not working, bluetooth not pairing

Your Mini is not supported.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity

Can I seamlessly toggle Apple TV between Mac Mini and Iphone / iPad?

I am having a Mac Mini, iPad, iPhone and Apple TV. Currently i am using 2 HDMI cables 1 between TV and Mac Mini and 2nd between TV and Apple TV. Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV; it becomes an issue.
Can I seamlessly toggle Apple TV between Mac Mini and iPhone / iPad?
Regards,
Mahendra Panchal.

Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV;
Toggle how? What are you doing? Why do you have the MacMini connected to the TV? That is the whole point of AppleTV. It is a simple way ( in therory ) to get your content to your TV without having to plug your computer in to your TV.
it becomes an issue.
What does? What is the issue? What specifically fails or does not work?

Will any of my old displays work with the new Mac Mini

I am thinking of getting a new Mac Mini.     What I need to know is if any of the monitor/displays I have here can bem used.
I have two old video monitors I used to used with my old mac mini (Samsung Symc Master 770 and old little Princeton - VL158) , a
n early 2006 iMac 20" (which I don't think I could use as a monitor from what I read) and an little Samsung TV with USB and HDMI connectors.,
Can I use any of these?
Need new connector cords?   Mini-DVI to VGA adapter?
Thanks

I am a writer though and a photographer (strictly point and shoot) for a couple of orgs. I just don't want o run out of space. And I hate!! slow response time.
Is the i5 adequate as well?
Glad to have found an Apple guru so quickly. May very well buc you more in the future.

Airport Extreme won't work with non apple products?

this is a recent problem after years on working ok.

You have not given us enough info to say anything. you haven't asked a question.
AE work fine as AP with non-apple clients.
I have multiple phones and wireless devices from numerous brands working with AE and TC.
What you might find is that naming of the AE has become more of a problem.. so you need to use SMB naming.. ie short, no spaces and pure alphanumeric, for the AE itself and the wireless SSID.
You might also find the latest firmware upgrade did nobody any good. If your AE is the flat one, go back to 7.6.1 which IMHO works better.
If your AE is old it could be just faulty.. it might need replacement.
If you want to do things like wireless extend, then there are huge issues with mixing apple and non-apple wireless routers.. but that is not new.. it has been an issues since Apple routers came out.

Lacie disk won't work with one specific mac

we got two mac pros at work, each with an external lacie 1TB drive. now, one of them won't be detected by the mac pro it's normally hooked up to. it just makes a ticking sound every second. however, when i connect it to the other mac pro, it works just fine. any suggestions?

Disconnect and power down the ext HD, zap the PRAM and NVRAM, as described in http://support.apple.com/kb/HT1379 restart, hook up the ext HD, and see if that fixes the issue.

Getting my wrt150n to work with my apple mac book pro

Hey guys,
I went round and round with everyone on this. I read the forums, called support, went to apple, and *finally* figured out a semi easy solution. This will fix dropped connections when waking from sleep and allow you to run your router in mixed mode (and significantly improve range and speed).
1.) Clone your desktop's mac address.
Open a browser and go to 198.168.1.1. There is an option under the wireless tab for it.
2.) Switch to WEP 10-hex security (if you are using security at all).
Enter a 10 digit number in the key1.
3.) Go to your mac book and open up the network preferences in your system preferences control panel.
a.) First clear out all your locations..especially ones associated with all the mess-up associated with trying to get your new wireless to work. Do this by selecting the Location drop-down menu and select Edit locations.
b.) Next Click on Airport from the network status screen (you should be on it) and click Configure... at the bottom. At the next screen, click options. For, If no recent networks are found, select: Keep looking for recent networks. Click OK. Now you shouldn't drop connections after a few minutes of inactivity!
c.) You should be back at the airport screen, at the bottom there is an Assist Me... button. Click it then the Assistant... bfind your networkutton afterwards, name your new location, click that you use Airport, find your wireless network and enter your 10-digit key.
You should be set!
V

One more thing....I changed the wireless settings to wide band only....that seemed to increase the speed and range.

Will Any Usb DVD-RW drive work with the 2011 Mac mini?

I am considering buying a USB DVD-RW drive, and i wanted to hear from people with first hand experience of USB dvd drive support for Mac's I'm looking for a DVD-RW DL drive, so It can burn DVD DL CD's normal DVD's RW's etc. Things a modern superdrive would do esentially.
I have checked and i personaly think the Official apple one will hit my bank too hard, not to mention it doesn't bother me what It looks like
Can anyone recommend any Drives that work?(It will also be used on My PC and Macbook with a broken superdrive)
I was looking around the £15-£25 price range
I was allso wondering if a USB to Sata with a Sata DVD drive will work? As from what i can see nobody has tried it!
Any help will be appriciated.
Thanks, Scott.

This OS X compatible > LG GE24LU20 Reviews works great with my iMac and Mac Mini.
Boots System Install and OS X Upgrade Disc's, plus burned and boots a Lion Recovery Disc.
Plus other trick features, like opening and closing from the eject button icon on the menu bar.

Cinema Display (A1081) Wont Work with NEW 2011 Mac Mini

Cinema display (A1081) woks fine with 2006 Mac Mini (has a DVI Connector on back) However same display does NOT work on mac mini 2011 (using Apples HDMI to DVI cable provided)
It shows in the ABOUT Displays, but seems to not get a signal from the mini,,,
Same 2011 Mini works fine with other DVI monitors
Any thoughts?
Thanks

I've got the same problem... is it the dvi-d???
i'm using a dvi-d-single linK do I have to use a dvi-d-dual link
Greentechlabs... Did you solve your problem?
Thanks
Renegabriel

My WRT310n won't work with my Appl Mac Mini and iPhone

Similar Messages

Maybe you are looking for