My WRT54G router is slowing down my internet?! Please HELP!!!!

I have a WRT54G (Version. 6) Wireless-G Broadband Router and I have had it for about a year now. Then one day it just became VERY slow. My internet is supposed to be around an average of 4000kb and now its all the sudden 500kb. So I tried many things I tried to: 1) Hooked my computer straight up to my modem and it was running at 4000kb again. 2) Update my Firmware to the newest version but still didnt work. 3) Reset my router to factory settings then didnt work. I have tried more things but I don't remember right now so if anyone there has an idea or they have the same problem please reply I need help.

Did you make changes on wireless router and adapter recently? Many external factors can affect the wireless signal strength... Take a look on why my wireless network speed is slow and 4 tips to improve wireless coverage articles, see whether can help you...

Similar Messages

  • Leopard slows down and freezes - please help

    I'm running Leopard on a Macbook and I have had startup problems and slowdowns in general a couple of days now.
    When I start up the machine I get the apple logo, the spinning circle and then the blue screen for about 2-3 minutes before I get my Leopard wallpaper. It then takes another 3-4 minutes before the dock and icons load up and usually a couple of minutes before I can actually access the desktop.
    The whole startup usually took me less than 2 minutes total and is now as you can see a much longer process.
    Once in Leopard applications take much longer to load than usual and often freeze or stop responding. I get the colored spinning disc a lot and it seems like Leopard is using a lot of time loading up even simple apps like iCal and Mail.
    I'm not sure but it seems like Finder is the problem. I have tried restarting Finder a couple of times and this always gives me the gray screen telling me to restart Leopard by holding the power button.
    I have no idea why this has happened, I haven't installed any big apps or used up a lot of the HD space. I still have approx 85GB on my HD so that shouldn't be the problem.
    I have of course tried the basic troubleshooting such as restarting and verifying/repairing disk permissions in Disk Utility so I don't know what else to do.
    Any suggestions, tips, or ideas are truly appreciated. I really want my old Mac back, the waiting is driving me nuts.
    Thanks
    Dave
    Message was edited by: davelovesmac

    Kenichi Watanabe wrote:
    Did Verify report any errors? Did you try starting up from the Leopard installation disk and running Disk Utility from the Installer's Utilities menu, then running Repair Disk?
    Verify didn't report any errors so that didn't really help.
    I have just popped in my Leopard disk but there doesn't seem to be a menu for "utilities". My options are "Install Mac OS X", "Optional installs" (which doesn't have a Repair Disk option", and "Instructions".
    Did your MacBook come with Leopard, or did you install the upgrade over your Tiger system?
    The machine came with Tiger so I bought Leopard seperately, formatted the HD and did a clean install. But this was back when Leopard came out and I haven't had any problems with the OS until now.

  • Time Machine backups slow down TC internet connection

    I'm having a problem with my TC internet connection slowing down dramatically. When I connect my DSL modem directly to my Mini, it's fine. When I connect it to the TC there are big slow downs off and on. I'm wondering if the backups done by TM slow down the internet connection and the network as a whole.

    Over ethernet no, it would have almost no effect.. over wireless yes.. it can have a big effect.
    How big are the backups generally? These should only be incremental and relatively small.
    Measure your actual speed of copying a file to the TC.. if you can put numbers to it, that will help. Use the Activity Monitor and see what is the average speed copying a file or when TM is backing up.
    Any improvements to the wireless speed will reduce the time the backup runs and how much time your internet is slow. Wireless is highly range and signal dependent. You might find a network rearrangement where you use the TC close to the Mini can solve the issue.. especially if you can connect to it by ethernet.. and then wireless bridge if you need to.

  • IOS 7 very slow, i have many problem , exemple  download documents , typing doc to go .   Very slow, sometime no response , please help us for this error

    IOS 7 very slow, i have many problem , exemple  download documents , typing doc to go .   Very slow, sometime no response , please help us for this error,

    spacepilot wrote:
    i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me  new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
    all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
    foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with  a firmer grasp of english that the normal call centre staff
    welcome to the forum    why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • IMovie required an update, now it is shutting down automatically. Please help.

    iMovie required an update, now it is shutting down automatically. Please Help.

    To stop Auto updates use: '''Tools -> Options -> Advanced -> Update Tab ''' <br> select the options you require ( see [[Updating Firefox]] )
    As for why your version does not work I do not know but suggest you look at:
    * [[Safe Mode]] Note when using safe mode do not make changes on the first dialogue Window you see; click the Continue button
    * [[Basic Troubleshooting]]
    You may also need to review the versions of Java see
    * [[Using the Java plugin with Firefox]]
    * "Why do I need Java 6 Update 10 and above for Firefox 3.6 and later versions? " - http://www.java.com/en/download/faq/firefox_newplugin.xml
    Your System details show you as using version 3.6.12 of Firefox, that is not the latest version, it would be normal practice to update to the latest version, which is why you are being offered the updates. See also [[Software Update Failed]]

  • My macbook connects to my wifi but when i bring up safari it says you are not connected to the internet, please help...

    my macbook connects to my wifi but when i bring up safari it says you are not connected to the internet, please help...

    Try restarting the browser or computer..
    if it still doesn't work, try with a different browser like chrome or mozilla

  • Bluetooth slows down wifi internet connectiom

    i just bought a magic mouse that uses bluetooth but when i turn on bluetooth on my imac my internet connection slows down, way....down my question is what do you do so that the bluetooth do not intervere my wifi signal...realy need your advise cause my old cable mouse is broken and without a mouse i can't control my computer....thanks

    You could try changing the channel that your wi-fi uses for creating the LAN. You would need to do this in your router configuration.
    Dah•veed

  • Mail Slows Down my Internet Speed

    After the recent November 10.6.5 update, the Mail app brings my internet connection to a crawl. I used to have a solid 12Mbps connection and <25ms ping times but while Mail runs, is kills the speed to less than 2Mbps and over 200ms ping times.
    I have Mail configured as IMAP to my GMail account. Everything worked fine up until I did the OS X update. I even deleted my account from Mail preferences and re-entered the account information...no change.
    Any help?

    I had this exact same problem. It suddenly started when I reset my router to the original settings. Every thing suddenly was slow, then I finally figured out it was Mac Mail, searched Google for an answer, found this thread, then went in to my router page, since no one could figure out the cause. ***BINGO***
    I fixed it by going to the Firewall settings.
    IP Flood Detection   [square box here] Enable
    I un-checked the square box and slow speed be gone!!!!!! This was in the Ubee router at
    http://192.168.100.1/RgContentFilter.asp
    but for other routers, it might also have a Firewall setting like this some where. Hunt through your settings at
    http://192.168.100.1/
    It looks like my Linksys router thinks that there is an attack going on and slows down my connection.
    is what gave me the idea to go hunting through the router, a uBee router. Thanks.

  • Airport Extreme (5th Gen) slows down my internet

    I'm currently on 8mbps internet service. It's been giving good stable connections months ago, only until recently I noticed the drop in speed.
    At first I checked with my ISP, they asked me to directly connect to my modem, and it's good (7.79Mb/s on speedtest). Then I tried to WAN back to my AE, connect on Ethernet, it slows down to 4Mb/s. On WiFi, the graphs on speedtest went up and down, the quite the same speed like I got from AE Ethernet.
    So I guess this is be my AE problem?
    By the way, I'm using CAT5e cable for WAN connection; using Airport Firmware 7.6.3, then tried downgrading to 7.6.1 (no improvement).

    Sorry I missed you already put that in your opening post.
    This problem has occasionally happened and there is no very clear reason for it.. the AE is more than fast enough to handle the full network speed of 100mbps fibre.. but some people hit this problem and seem not able to get around it.
    Can you please reset the AE to factory and redo the seutp.
    Use the 5.6 utility to do the setup. See below..
    From 5.6 utility you can actually set the wan speed of the ethernet wan port.
    Set it to 100mbit full duplex.
    Make sure the ethernet cable is good.. maybe swap to be sure.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0

  • Open ports slow down my internet connection. How to close them? What to do?

    My MacBook Pro has massive problems with internet connectivity. At times the connection is blazingly fast, at times unbelievably slow.
    I've spoken to my internet provider who was able to inform me that my computer opens up 500-700 ports which is probably what's slowing down the network connectivity. When I'm online with the MacBook Pro, the web gets unstable – also for other connected devices like iPad etc.
    The web supporter asked me to run an anti-virus scan which I did – with no results. The problem persists. When my MacBook Pro is not online, there are approximately 15 ports open, when I log on the web that number increases to between 500 and 700.
    Is this normal?
    Can anyone tell me how to solve this issue?
    How do I figure out which application opens these ports? (and how to close them?)
    I tried logging into another user account on the computer and the problem seemed to disappear, indicating that it is caused by something run only on my user account.
    Hope someone can help me..

    Open ports don't slow down your computer. The tech support person you spoke to doesn't know what they are talking about.
    Basically, when you are using a web browser, opening a page means that the browser needs to open a connection for each element in the page (e.g., it needs to grab each picture, CSS, and JavaScript file that the page requires). This could be a couple of dozen, or it could be hundreds (and there's no telling what Flash content on the page will do). The browser tries to mitigate things a bit using a cache (you might check to make sure the cache is turned on, but this is the default setting). However, this is how all browsers work and how the whole system is designed to operate. You cannot "close" any ports, and they don't linger open, they remain open only as long as data is being transferred. This is expected and appropriate behavior.
    The most likely culprit is that you are receiving poor DNS service from your service provider. Every time the computer sees an address like 'http://www.google.com', it needs to send out a request to figure out what numerical address goes with the human-readable name. If the DNS service your system is assigned to use doesn't respond lightning-quick, your experience is going to be very sluggish.
    You might want to add an external DNS service to your list of DNS providers. Go to System Preferences > Network, select the network you are using on the left (Ethernet or AirPort), and click the 'Advanced' button. Click on the 'DNS' tab, then press the '+' button under the left panel. I would add the OpenDNS.com DNS servers. Add the following DNS addresses:
    {quote}
    208.67.222.222
    208.67.220.220
    {quote}
    Click the 'OK' button. And then the 'Apply' button to save the changes.
    That will probably fix the problem. If it doesn't the next most likely issue is either network congestion (e.g., your ISP's network is just too busy; a very common thing for small ISPs and cable Internet service), or the remote site that you are trying to contact is simply not performing so well.

  • WRT54GS Router -- Extremely slow performance

    I am currently using a hardware version 1 WRT54GS router. This router sends out to about 4-5 computers, usually only 3 at a time, two of which are wired to the router, one being wireless. Up until about 3 days ago, everything has been fine and dandy for over a year or however long we've had the router. However, a couple days ago, the speed has DRAMATICALLY decreased going through the router. I'm talking about a speed of 864ms ping, 0.4mbps download rate compared to a speed of 17ms ping and 14.1 mbps download rate. I dont know what caused this sudden change in speed, and upon contacting live chat, i was told my warranty no longer exists. Tried reseting router+modem, installing new firmware, etc. I still dont know what can cause this sudden change in speed.
    Thanks,
    Taylor

    Have you upgraded the router's firmware based on the version no of the router..? If yes then,reset the router for 45 seconds,power cycle the router and reconfigure it from the scratch as it is advisable to reset the router after upgrading the firmware of the router.
    While configuring the router's settings...Change the SSID to unique name,Change the Wireless Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Fragmentation Threshold to 2304,RTS Threshold to 2304 and Click on Save Settings...Also under Security tab..Uncheck "Filter Anonymous Internet Requests "...Now,check.

  • Slow Internet Please Help "Westell 7500"

    So for the past few days I have been dealing with a slow internet connection.  I called into verizon and they sent 2 tech people out to my house and basicaly said everything was fine.  Although they did pretend they solved a problem.  When they tested my modem they said I was getting the correct amout in. (3.6 down/.8 up)  But when you try and get on a computer or my xbox and speed test it, it goes to about http://www.speedtest.net/result/2277792647.png  about .3/.1.  The tech people did not help at all and I asked that they look at the modem page but they refused.  
    Transceiver Statistics
    Transceiver Revision
    A2pB020b3.d20h
    Vendor ID Code
    4D54
    Line Mode
    ADSL_2plus
    Data Path
    FAST
    Transceiver Information
    Down Stream Path
    Up Stream Path
    DSL Speed (Kbits/Sec)
    3359
    863
    Margin (dB)
    30.4
    19.0
    Line Attenuation (dB)
    3.5
    2.1
    Transmit Power (dBm)
    0.0
    12.8
    There are the transceiver stats.  I have tried many different things and nothing works please help.

    Ben12 wrote:
     How do I copy the info out of the command promt for trace route?
    After you get the route to show on your screen:
    #1 Right click.
    #2 From the options, you would use Select All
    #3 Press the CTRL and C key(s) at the same time on your computer keyboard.
    #4 Then to paste the output into the message: You use CTRL+V (The CTRL and the V key at the same time).
    #2 If you did not want to select all, then from the options you would select Mark
    #3 Highlight what you want copied.
    #4 Right click once.
    #5 Then paste the output into the message.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Hi all, my mac's suddenly slowed down significantly - can anyone help?

    Hi there, a couple of weeks ago my mac suddenly slowed down significantly. Since then I've installed the new operating system and that's helped a little but it's still not running as it should.
    Here's my EtreCheck report. Any ideas you clever people?
    EtreCheck version: 2.0.11 (98)
    Report generated 8 November 2014 16:37:52 GMT
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 4:31:31
    Disk Information: ℹ️
      APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (375.82 GB free)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) Support
      [loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) Support
    Launch Agents: ℹ️
      [running] com.advent.BonjourAgent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.sophos.uiserver.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.versioncueCS3.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [running] com.sophos.common.servicemanager.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.advent.ADVENT AiO Annual Opt.plist Support
      [loaded] com.advent.ADVENT AiO Firmware Updater.plist Support
      [loaded] com.advent.ADVENT AiO Software Updater.plist Support
      [loaded] com.divx.agent.postinstall.plist Support
      [failed] com.facebook.videochat.[redacted].plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      AdobeResourceSynchronizer Application (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: Java 7 Update 51 Check version
      OVSHelper: Version: 1.1 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 2.2 Support
      Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
      AdobePDFViewer: Version: 10.1.12 Support
      DirectorShockwave: Version: 12.0.0r112 - SDK 10.6 Support
    Safari Extensions: ℹ️
      AdBlock
      Ebay Shopping Assistant
      Searchme
      Amazon Shopping Assistant
      DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
      Adobe Version Cue CS3  Support
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
    Time Machine: ℹ️
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 123.06 GB
      Destinations:
      Expansion Drive [Local]
      Total size: 319.73 GB
      Total number of backups: 12
      Oldest backup: 2012-10-05 16:41:40 +0000
      Last backup: 2014-11-02 10:47:48 +0000
      Size of backup disk: Too small
      Backup size 319.73 GB < (Disk used 123.06 GB X 3)
    Top Processes by CPU: ℹ️
          1% java
          0% Installer
          0% InterCheck
          0% AppleSpell
          0% SophosUIServer
    Top Processes by Memory: ℹ️
      289 MB loginwindow
      236 MB com.apple.WebKit.WebContent
      155 MB Safari
      73 MB InterCheck
      69 MB Finder
    Virtual Memory Information: ℹ️
      40 MB Free RAM
      1.48 GB Active RAM
      1.47 GB Inactive RAM
      631 MB Wired RAM
      4.68 GB Page-ins
      64 MB Page-outs

    And while your at it, also uninstall the Spigot adware that shows in your report (as "SearchMe"):
    http://www.thesafemac.com/arg-spigot/

  • Extremely slow DSL speeds. Up speed higher than Down speed. Please help.

    I just purchased the 1.1 - 3.0Mbps hi-speed DSL package.
    Verizon speed test shows .17Mbps down and .536Mbps up. This is obviously curious for two reasons: 1) the incredibly slow down speed, and 2) the down speed being slower than the up speed. 
    Curiously, speedtest.net shows different results:
    2.45Mbps down, .55Mbps up
    What could this mean? Transceiver data follows.
    Transceiver Revision 3.3.6.10.0.1
    Vendor ID Code 4D54
    Line Mode ADSL_G.dmt
    Data Path FAST  
    DSL Speed (Kbits/Sec)
    Down Stream Path 3360
    Up Stream Path 864
    Margin (dB)
    Down Stream Path 27.1
    Up Stream Path 16.0
    Line Attenuation (dB)
    Down Stream Path 20.1
    Up Stream Path 8.0
    Transmit Power (dBm)
    Down Stream Path 6.8
    Up Stream Path 11.9
    Thanks in advance for any advice/ assistance you can offer. This is extremely frustrating.
    M King
    Solved!
    Go to Solution.

    OK. It seems as though you're suffering from what some people call "Juniperitus." If you're on a Remote DSLAM that uses Alcatel Litespan equipment (Litespan 2000 for example) along with being connected to a Juniper Networks ERX edge router, there tends to be an incompatibility between the two pieces of equipment that causes TCP connections and pretty much any other form of transfer to see artificial packet loss, which results in transmission. This results in inefficiency in every transfer, so what you're seeing is simply a result of all of this. In the past when Verizon first installed Litespan, they were using older Redback Networks edge routers, which did not create such problems. I'm on a Litespan and happen to still be on a Redback in my area (one of remaining ones still in operation in my area) and I get my max line speed with no issue. It's unfortunate that these actually perform better despite the Junipers being far better edge routers in terms of capacity.
    I know someone who should be able to get this fixed for you. I'll send you a Private Message.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Firewall/VPN Model-SG300 Cyberguard after configuration internet working very slow....please help me...

    HI FRIENDS,
    i have one firewall model number sg300 i configured each and everything
    but after configuration internet working very slow.if i want to open any website it is taking 5 min .i connected
    my lease ling directly in this device.
    please help me....
    Thanks,
    Madhukar 

    Hi Madhukar,
    It seems that it is not a hyper-v issue .
    For troubleshooting this please use your computer to access internet directly (without firewall ).
    If it works well , you may go over the configuration of the firewall .
    Also you can contact the hardware vendor .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • Font Smoothing GONE--Help!!!

    I'm running 10.6.2, and I pretty much have ZERO font smoothing whenever I ctrl-mouse zoom on any menu, any text, any program. This is on my MacBook Pro (2 years old) that had perfect font smoothing in Leopard. I've turned off the CRT checkbox in Syst

  • How to have a check on change bars and/or tags before generating a PDF

    Hi All, There were many instances where I have generated very huge books (over 1300 pgs), and realize that some chapter(s) (files) are printed along with the tags or the change bars on. To resolve this, I had to go back and regenerate the same book a

  • After upgrade from snow leopard to lion, where is application front row?

    After upgrade from snow leopard to lion, where is application front row? i realize it when to use my remote. any one knows about this matter?

  • Double consumption of Material while doing Picking using COIK T. code.

    Hi, I have a component for process order which is WM managed and is withdrawn from storage type 100. The component qty is  1504 PC and the stock in storage type 100 is 199 PC. While doing COIK the system issues double the qty ( 398) of the component

  • Maintaining RFC Connection

    Dear experts, I have done CRM_ABAP, CRM_JAVA,ERP installation based on Oracle in a laptop for SAP Best Practise. And I'm configuring the settings for ERP according to guide(BP_CRM_V170_Demo_System_Export_V2.pdf) downloaded from note 1040010. In the c