My WRT54G2 will Not Work HELP NEEDED !! PLease Help

Question

Hey i Have a WRT54G2 and it has worked Flawlessly for about a Year... One Day i Wake u To No Connection coming From my Linksys ..... on the Wirless Connections Pop up there is a Message saying  " Information Sent over this network might be visable to others" I Have Tried Everything and Anything to Figure Out or Fix the Problem But NOthing i Do Works ... I am Really Out of Options ,,,,, Someone PLeaseeeee HElllllp Meeeee !!!!1 Aaaahhhhhhhhhhhhhh 

Answer 1

In this case try to change the power socket. Try to do 30/30/30 hard reset. The following procedure will clear out the NVRAM and set Router back to default values:
~~ With the unit powered on, press and hold the reset button on back of unit for 30 seconds
~~ Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
~~ Plug the unit back in STILL holding the reset button a final 30 seconds....
Then make the physical connectivity. Here are the steps for the physical connectivity for the router:
The router’s power adapter needs to be plugged to your router and into an available power outlet.
If using a wired connection, the first Ethernet cable needs to be plugged to the computer’s LAN port into any of the router’s blue numbered Ethernet ports.
The second Ethernet cable should be plugged to the modem’s Internet port and the other end into the router’s yellow Internet port.
Ensure that you have no firewall enabled that may prevent the router from being detected.
Then make the manual settings according to the ISP setup. Here is the link for setting up a Linksys router with Cable Internet service:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...
Here is the link for setting up a Linksys router with DSL Internet service: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...