My Wrtg54G and blocking web addresses

HI
I have tried to use the setup to block certin web pages but does not seem to work I did u[grde firm ware to the latest one foe my unit. But still still not workin to block the address I have entered. Has any go tthis to work or is linksys going to have this fixed in a new release.
In the setup 192.168.1.1 under security you can block certain web pages.

Hi hakmacpace,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps!

Similar Messages

RV016: PPTP Server and "Block MAC address"

So if the PPTP server is enabled, and "Block MAC address not on the list" is enabled under the DHCP settings, will the PPTP client get an IP address?
Similarly, if the PPTP server is enabled and the range of IP addresses configured on the PPTP server screen is outside the IP range of the router due to a subnet mask (like 255.255.225.248 for example), will the IP still be assigned to the PPTP client? If assigned, will that IP have any connectivity to the LAN?
Thank you in advance for any answers!
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

So here's how PPTP works with these two features:
1. The PPTP IP range is a different range than the DHCP range. You get an error message if your PPTP IP range overlaps with the DHCP one.
I didn't test the 'Block MAC' function because since the IP isn't coming from the DHCP pool, I highly doubt any MAC blocking will work.
2. Since your PPTP IP address range is outside of the DHCP range, this point is completely taken off the table. However, if you choose an IP range that's outside of the subnet, you'll get an error message when saving. I also learned that if you set the PPTP IP to just a single number and connect, the router will automatically reject any additional connections since no IPs are available.
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

Java update (3 days ago) won't let me play yahoo games anymore. I've tried moving java security to Medium and adding web address as "permissive use". Still nothing. I'd really like a fix. Really, apple? What's your beef with yahoo games?

Installed Java update three days ago. Now, can't play yahoo games as it's now blocked by security settings. Already have tried moving Java security to Medium and adding yahoo.games.com (including web address of game) as a "Permissive exception". Also tried removing java and installing older version. Still nothing. Really Apple?!? What's your beef with yahoo games?

csnorth,
all of the older update versions of Java SE 7 can be found here. If 7u45 also didn’t work with your Yahoo! games, you can choose from any of the even older versions there as well.

Upgraded from iWeb 06 to 08, and now web address and links don't work

Hi there,
I recently had the hard drive of my computer replaced and the Mac shop automatically upgraded iWeb 06 to iWeb 08, without asking me (and they also upgraded iPhoto)... I didn't think anything of it and went home. The next time I tried to update my website in iWeb I was asked a question that went something like did I want to upgrade or change or did I want to go ahead or something? I foolishly just said yes, whatever, and did my updates to my website. Then I used Transmit to upload my website files to my web site host. The web pages themselves still all look fine in Firefox, but there is one massive problem: when I type in my web address, which is www.*****.com, in Firefox, I'm told: "404 Not Found - The requested URL /Site/Home.html was not found on this server". When this happens, I've noticed that the www.****.com that I typed into the address bar now has changed to http://www.******.com/Site/Home.html.... If I delete the "/Site" bit from this new "address" my website comes up! If I then click on the link The Albadukes e.g., this page comes up fine. I then click on Links, and this page also opens up fine. However, if I then try to go back to the page called The Albadukes, it doesn't open! Instead, I get the 404 Not Found message again. Here, I've noticed that the writing in the web address box of the browser has changed from "http://www.***.com/The_Albadukes.html" (which works) to http://www.****.com/The Albadukes.html" (i.e. with a space between "The" and "Albadukes" - doesn't work...). If I remove the space and instead add an underscore, then the page opens! This kind of thing happens in different directions between different pages within my website.
<Edited by Moderator>
I realise the problems when upgrading to 08 and I wish it had never happened, but it did. So my question is: does anyone know if these link and web address problems can be solved, or should I just accept that the problems are due to the upgrade and instead just recreate my website in 08 (and hope that 08 will work OK on my computer...)? I am very very grateful for any help!!
Many many thanks,
Sofie

Hmm, interestingly enough it works on my MacBook fine...just a lot slower but that's because of ram size. I cannot figure out what's the problem with it on my iMac though.
I've gone into Quicktime and deleted any divx files associated with that and still nothing.

Unable to close open and blocked web server ports

I have been running the sun webserver 6.1 as a test development environment on my local pc (Windows 2000) at work. The machine crashed while the web server was running, and while the server instance stopped, the ports being used are still open and apparently, still being used. Restarting my machine does not solve the problem.
Using netstat (through cygwin - i am familiar with linux, and have been using cygwin as the easiest way to do many things with the web server) I can see that the ports are indeed being "used", however i cannot find any running processes (through the top or ps command or the task list) associated with the open ports. Also attempts to start the server again fail, and the server complains that the ports are currently being used.
In order to continue to develop I created a new domain using a different set of ports. Since then, I have (in zealous cleanup) removed the domain that was using those ports, and in attempting to setup a different webserver encountered the open ports.
I need/wish to stop the running processes and close the open ports. Any ideas?
Thanks in anticipation.

There are no such processes running in either the task manager or services.
I do not believe that the domain/web server is running, since the domain instance has since been removed.
However, the ports seems to be stuck on being "used".

Is it possible to block web addresses via Airport?

Is it possible to keep any device that accesses my Airport to view certain websites? I would like to not have to go into 2 ipads, ipod, iphone, and two mac computers to update safari, firefox, or dolphin and set each one up to not allow the user to view youtube for example.
Michael

Not with an AirPort Base Station, no, but there are services capable of doing so. They replace your ISP's DNS with theirs, and you can customise it to block individual websites or broad categories.
OpenDNS is one; it's free for home users but businesses and institutions must pay. There are other, similar services.

How do I display the web address within Adobe PDF Reader 10 & IE 9 64-bit?

Until a week ago, I was using IE 9 32-bit version together with Adobe PDF Reader 10. When I would try to open a PDF file from within the browser, it would and the Web Address would continue to display at the top of the window while browing the PDF document. I could then continue using IE 9 and move on to other pages and etc...
Now, I have swtiched to using the IE 9 64-bit version. What happens now is that when I enter an address in the web browser and it's a direct link to a PDF file example: https://www.technicalindicatorindex.com/newsletter/bpdf/TII_Newsletter_1686a_10.11.11_7055 475115.pdf ), it opens up with no problems, but I no longer see the IE 9 Web Address shown anywhere. So in essence, that page becomes a Adobe PDF program window and I loose my IE 9 access. I guess the PDF files are no longer displayed within the browser (althought I have it check ON).
Am I missing something?

I did write there, but no replies
I guess that with Adobe Reader 10.1.1 running with IE 9.x in x64 bit mode, you cannot open the PDF within explorer, as it does it outside it as a separate Window?
Correct?

How do I display the web address with Adobe PDF Reader 10.1.1 & IE 9 x64?

Until a week ago, I was using IE 9 32-bit version together with Adobe PDF Reader 10.1.1. When I would try to open a PDF file from within the browser, it would and the Web Address would continue to display at the top of the window while browing the PDF document. I could then continue using IE 9 and move on to other pages and etc...
Now, I have swtiched to using the IE 9 64-bit version. What happens now is that when I enter an address in the web browser and it's a direct link to a PDF file example: https://www.technicalindicatorindex.com/newsletter/bpdf/TII_Newsletter _1686a_10.11.11_7055475115.pdf ), it opens up with no problems, but I no longer see the IE 9 Web Address shown anywhere. So in essence, that page becomes a Adobe PDF program window and I loose my IE 9 access. I guess the PDF files are no longer displayed within the browser (althought I have it check ON).
Am I missing something?

I did write there, but no replies
I guess that with Adobe Reader 10.1.1 running with IE 9.x in x64 bit mode, you cannot open the PDF within explorer, as it does it outside it as a separate Window?
Correct?

Converting Word to PDF-don't link web addresses

I'm trying to convert a word doc to a pdf using Acrobat XI Standard. The word doc has a hyperlink in one spot and a web address typed out in another spot. The goal I'm looking for is to have the hyperlink carry over into the pdf, and the typed out web address to be non-clickable. The hyperlink does carry over, but the typed out web address is also hyperlinking, but without the hyperlink box. How do I get the pdf to not link the typed out web address? There is no hyperlink box to delete.
Thanks!

That's a setting of the application. You can disable it under Edit - Preferences - General - Create links from URLs.

IWeb web addresses

Ok, so I published my site with iWeb '08 and the web address is web.me.com/emailaddress...etc. I need a shorter web address so that people can remember it. I was watching the '09 tutorial and it showed that when publishing you could type in your own web address (lizinfocus.com is the one used for the tutorial). However, in the same tutorial, when the pop-up window appeared to view site or announce it, the window still showed the web address as web.me.com/emailaddress/lizinfocus.
I'm curious, is there some way that I can buy the domain name that I want and when people type it, they are redirected to my iWeb website? Or does this happen in iWeb '09 automatically? For example, if someone were to type in lizinfocus.com (from the tutorial) would they be redirected to her super long iWeb address?
I would be fine with this as long as I could keep the web address simple and easy to remember. Thank you.

dominic.lopez wrote:
is there some way that I can buy the domain name that I want and when people type it, they are redirected to my iWeb website?
Dominic ~ Yes, this article explains using domain names with iWeb:
http://iwebfaq.org/site/iWeb_Domains.html
dominic.lopez wrote:
Or does this happen in iWeb '09 automatically?
iWeb '09 did not change the way domain names are set up. See this Apple article:
_iWeb: Using your own domain name_

Clickable Hyperlink for Web Address Link in e-mail

It turns out that you CAN put a clickable hyper link into an e-mail message. Starting from a message (you are not on the web page) go to the relevant web page and select the entire addresss including http and pull that into the clipboard.
On the text of the message body, select Edit and Add Hyperlink from the top menu bar. You will get a dialogue box that asks for the web address. Paste the web address there and Enter. Maybe V 10.5 might be more straight forward?
From the actual web page, Hold down the Apple and Shift keys at the same time and press i. It starts a new blank e-mail message and the web address appears as a blue highlited Hyperlink.
Tech Support showed me No. 1 above.

Generally speaking, the term hyperlink is used for click HERE using HERE for the hidden URL address or link instead of just providing the URL address or link - http://www.apple.com/
As Michael provided, a URL address only or link which requires including http:// does not become active with a Mail.app message until the sending process. When including a URL address only, check the copy of the Sent message. The link will be active.
Hyperlinks in a Mail.app message are active before the message is sent.

When I open firefox, the web address ishows my chosen home page but the window shows "untitled" and I am unable to connect to any site to the internet.

I chose the New York Times site to be my home page and when I open Firefox this address appears in the web address panel. But in the tab box it says "untitled" and I don't connect to any web page. I have tried reloading firefox, nothing seems to work. How can I stop this?

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

How to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area. What are the other ways

I am a cityville game player on facebook and for some reason today I am unable to send out blasted on the game when if fact this was never a problem. Finally I went to internet explorer and the same problem happen, but internet explorer let me know that the content was blocked. All I had to do was unblock it and that was easy and know I can blast out. However trying to remove the block from fire fox is a issue. I went into to tools and removed every block and it still want work right. Therefore, how to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area under tools options. What are the other ways

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Every time i go on w website, several other web address keep opening. I get pages for related information and also a lot of pages to download things.

Every time I go on to a different website, several other web address keep opening. I get pages that open up are for related information and also a lot of pages for downloads, including ones to update Firefox.. (Sometimes it even tells me I've downloaded something, and it ask me if I want to save the file or run it. )
Ps.Please also send me the address to update Firefox.
Your help will be so much appreciated!
Anne

Hello,
FIrst scan your computer, this pages can be malwares, addons, etc:
*[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Problems caused by malwares]
Verify if this happens in safe mode:
*[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in safe mode]
You also can use addon to block popup/ads pages:
*[https://addons.mozilla.org/en-US/firefox/addon/simple-adblock Simple Adblock]
*[https://addons.mozilla.org/en-US/firefox/addon/adblock-plus Adblock Plus]
*[https://addons.mozilla.org/en-US/firefox/addon/adblock-plus-pop-up-addon Adblock Plus Pop-up Addon]
*[https://addons.mozilla.org/en-US/firefox/search/?q=adblock More Results]
Upgrade Firefox only from oficial page:
*[http://www.mozilla.org/en-US/firefox/new/ Last Firefox]

Firefox no longer loads webpages, try to load web address and it goes back to about:home

Just upgraded to Firefox 17 from 15 and when the update installed it said successful, however when I try to load a web address the address bar blinks quickly and shows "about:home" and the webpage doesn't even change at all. Anyone have any ideas of why this could be happening?

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My Wrtg54G and blocking web addresses

Similar Messages

Maybe you are looking for