My X-Fi Titanium I/O Drive stopped working please help!!!

Ok guys this are the things i have tried.... I have opened my computer and disconnected and connected everything, do a clean install of all creative software and drivers and now my last resort was a complete format which didn't work, when i noticed my I/O dri've wasn't working i also noticed that in Windows it just said SPDIF OUT when i tried to adjust the volume and also when i tried to open the console launcher it gave me a weird message about no audio device supported or something like that, right now with the complete format i did i could get the souncard working again but the I/O dri've is still dead. I'm using Windows 7 64bit and my system specs are below. PLEASE help me guys.
My Current PC:
Motherboard: GIGABYTE GA-MA790X-UD4 socket AM2+/AM2
Processor: AMD Phenom II X3 720 2.8Ghz Tri-Core
Memory: 4GB Corsair XMS2 / Dual-Channel / DDR2 800
Hard Dri've: Western Digital Caviar SE6 250GB 7200 RPM
Video Card: Sapphire Radeon HD 4870 GB
Monitor: 23" Acer H233H 5ms Widescreen LCD Monitor
SoundCard: SB X-Fi Titanium Pro Series
Speakers: Harman Kardon Soundsticks II
Operating System: Windows 7 Ultimate 64bit

=I've had problems with the front panel on mine intermittently ceasing to function. I've always been able to do the whole uninstall all creative software/drivers, uninstall hardware, etc. and it would work again, though. I've been waiting quite some time for a reason why it would do this, and haven't heard anything. Did you ever get yours to work again?

Similar Messages

  • Realtek Mic stopped working Please Help.

     I'm on a Toshiba NB205-N325BN, Windows 7 Home Premium, Intel Atom processor N280 o 1.66GHz, 512KB L2 Cache, 667MHz FSB Mobile Intel® 945GSE Express Chipset. Audio Driver is  a Realtek High Definition Audio driver version 6.0.1.5904
    My internal mic stopped working. I'm not sure how long it hasn't been since I don't use it all the time, but when I went to use skype last night I found that the mic wouldn't work with anything even the sound recorder program in the accessories folder. I've tried uninstalling and reinstalling the driver, but to no success. I figured I give this forum ago to see if any one could help otherwise I'll have to call the Toshiba support line or do a clean install of windows (which I do not want to do at this time.)

    I actually got in contact with Realtek's support via e-mail, and they sent me a program to install that will let them check their devices that are on the machine. After I ran the scan this is the conversation that we had:
    Realtek: "We found you had plugged a external mic to microphone jack. Have you tried to unplug external mic and then check the built in mic ?" 
    Me: "I don't own an external mic, but I did plug in my headphones into the mic port by accident recently maybe that was it? I don't have anything plugged in right now and it's not working."
    Realtek: "Please try to dump audio info again(run the scan again) during recording interanl mic sound."
    After I ran the scan again they sent me these instructions, and I'm kind of confused on what he means (I think the support is in Asia somewhere and they are translating each message at a time.)
    Realtek: "We tried to check it with TOSHIBA. Your machine supports audio prower download feature after audio idle status. You can try to turn off this function on the Power Manager Page of Realtek HD Audio Manageer. Or you can try to plug headphone jack to keep audio power up state .
    Can anyone help me understand that last part? I went to the Audio Manager and I didn't see a Power Manager page anywhere! Does "Or you can try to plug headphone jack to keep audio power up state." Mean that it might start working if I try to use it with headphones?

  • My Refine Edge in Photoshop CS6 has STOPPED WORKING, please help!

    Photoshop CS6
    Windows 8.1
    I have been using refine edge with no problem for months.
    everything worked great!
    I was able to extract out hair and edges very, very, very well...
    but about 2 weeks ago...something changed... the refine edge brush no longer works.
    When I click on Refine Edge... instead of a brush icon, I get the CIRCLE with a SLASH and my system keeps dinging because the tool is just not available.
    I deleted my preferences...but it is still a problem
    NOW... when I adjust the sliders, i don't see a preview of the adjustments...
    Please help!!!!

    no difference.
    i have tried to check and uncheck everything...
    if i adjust the sliders, i get NO Preview... but when i click OK, the resulting photo has been completely ruined by the tool...
    I tried deleting preferences...no change
    the weird thing is that this problem was very sudden.  Just a few weeks ago, I was using refine edge with NO PROBLEM. it is my GO TO tool for extracting people out of pictures...
    but then one day, it just stopped working...
    Do i need to reinstall CS6???

  • When i use Adobe Premiere Elements 10, after about 10 minutes it stops working please help

    I recently purchesed Adobe premiere elemnts 10 and it installed correctly, and it loads up fine but once i start putting video together, it starts to mess up, the video i cant watch because its very slow and jumpy and then after a few minutes of me editing a message pops up saying Premiere elements 10 has stopped working, and windows dose not give me a reson why it just stops, i am stuck with what it could be, the video i am using is from a dslr and is in full hd but that works on windows movie maker fine but dose not seem to work on this programe any help with this would be appriceated

    >dont know what you mean by codec
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen
    shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/

  • New Hard drive not working - please help!!!

    This is an original thread that I'd started:
    http://discussions.apple.com/thread.jspa?threadID=2066043&tstart=0
    Since that, I tried the following this morning.
    I took out the old 100GB drive and fitted the new 500GB (blank) drive. My plan was to fresh install OSX, install Carbon Copy Cloner and then clone the old drive by plugging it in with a reading device I have. What actually happened was the following:
    I put in my Mac OSX install disc 1. I opened disc utility from the top toolbar. In disc utility the new drive showed up and I formatted (erase option) it to mac OS Extended (journalled). I then began a fresh install of OSX. As it started the macbook told me I was '+running on battery power+' and '+was I sure?+'. With full battery I said yes and continued. All was going well and it prompted for the second install disc. It got some way through that and then got stuck at 38% installing garage band loops. The new internal drive was also making a repetitive noise - not loud or anything but certainly sounded like it was searching for something. As the whole thing was stuck and nothing was working I held down the power button.
    I tried again with the first disc but it wont even do anything anymore! I took out the new drive and put in the old one. Booted up. Connected the new drive to the reader with the idea of re-formatting it via disc utility.
    But now the brand new drive is not readable and is making the a few funny repetitive noises.
    Please help me someone - I'm very worried about this new drive now!!! Is is broken or corrupted or something???
    Your help is very much appreciated
    Adam

    Vegas Superstar wrote:
    My plan was to fresh install OSX, install Carbon Copy Cloner and then clone the old drive by plugging it in with a reading device I have.
    Hi VS,
    What "reading device" are you using?
    As it started the macbook told me I was '+running on battery power+' and '+was I sure?+'. With full battery I said yes and continued.
    It is best to have the power adapter connected when running a long process like this which cannot be interrupted.
    The new internal drive was also making a repetitive noise - not loud or anything but certainly sounded like it was searching for something. As the whole thing was stuck and nothing was working I held down the power button.
    How long was it "stuck?"
    I tried again with the first disc but it wont even do anything anymore! I took out the new drive and put in the old one. Booted up. Connected the new drive to the reader with the idea of re-formatting it via disc utility.
    But now the brand new drive is not readable and is making the a few funny repetitive noises.
    Please help me someone - I'm very worried about this new drive now!!! Is is broken or corrupted or something???
    It sounds like there is something amiss with the new HD. If you have access to a different external enclosure, (even on a PC, just to see if the HD will function), you could try erasing/formatting it again. If not, I think it's time to contact the vendor about a return.

  • Internet sharing suddenly stopped working - please help!

    I have been sharing my internet for weeks from my computer but this morning it suddenly stopped working. I've tried changing the password, changing the channel number, and changing the Network name to a simple one, but it is all not working Apparently the authentication server is not responding? How can I fix that?

    I'm having the same problem. I had internet sharing set up on my iMac from Ethernet via AirPort, and received quite well on my MacBook and iPod Touch, and then one day, it just stopped working. I'm assuming that some update or other caused this problem, but I have no idea which (I mostly use the internet on my desktop machine, so it may have been several days before I noticed the problem). I've tried with-and-without a password, and also tried sharing from my MacBook to the iMac and iPod Touch, and I can't get any bandwidth (I can connect to the 802.11 network that I create, but I can't get any internet through it).

  • Ipod nano 6th gen touch screen stopped working please help

    Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

    I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
    If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
    Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
    I have given up with my Nano and am now using an old model

  • Itunes has stopped working - Please help - Can't SYNC !!

    I have windows 7.
    I have the latest Itunes.
    My Itunes works fine.
    When I plug in my iphone 4 I tunes works fine.
    Whe I click sync Iphone, it gets to step 3/4 of the sync process and then it says " I tunes has stopped working" underneath that it says "Windows can check online for a solution to the problem". When I clikc view problem details I get:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    10.4.1.10
      Application Timestamp:    4e4e1904
      Fault Module Name:    QuickTime.qts
      Fault Module Version:    7.70.80.34
      Fault Module Timestamp:    4e13ba08
      Exception Code:    c0000005
      Exception Offset:    00146b30
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    2057
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    I have already tried uninstalling itunes, quick time and apple support programmes, and then reinstalling all of them.
    Help will be highly appreciated.
    Thanks.

    So sorry - I'm in the same boat!  Someone please help us out!!!!!

  • USB SLOT STOPPED WORKING PLEASE HELP ASAP

    I have a mac book pro (bought in 2012) and my usb slot (the one close to the sd card slot) has stopped working. I was wondering what can I do to maybe fix this, and with whatever i have to do delete my files?

    Try unplugging all peripherals and resetting SMC.
    http://support.apple.com/kb/HT3964

  • Backup stops working, please help

    I have an original iPhone (metal Back) and for the past 4 days, my phone will not backup in itunes. I'll get an prompt saying "AppleMobileBackup.exe stopped working. Windows will now closed program" I close out the prompt, and itunes will sync my music like normal but will not backup the phone. I tried uninstalling itunes completely then reinstalling it. I still get the same message when i sync. I also checked my previous backups so that way i can restore, but when i checked, it showed that itunes had no previous backups stored... so i'm really resistant to restore as a new iphone since there isn't a backup to restore to. Any idea as to why im getting this error message. This has never happened before. I have the current 3.1 OS as well as iTunes 9.0.1 What should i do???

    Hi
    What follows is a fix that should get your 2g iphone back up and running.
    Prep:
    Iphone os 3.1 updated downloaded and saved somewhere on your mac or pc where it can found without much effort.
    Iphone 2g 3g 3gs
    Itunes 9
    Sync cables.
    1: Start up Itunes and making sure iphone is powered on and in restore mode plug it into computer.
    2:At the same time press and hold both the power and home keys and continue to hold them until the phone powers off (about 10 seconds). Once the iphone powers off release the power key but continue to hold the home key for another 15-30 seconds or until it is recognized by itunes. At this point the screen on the iphone should be black but you will see an indicator pop up in Itunes stating iphone detected in restore mode.
    3:Click continue or okay and once you get to the restore screen hold shift or ctrl options key and click restore. It will open a file browser window. Navigate to the folder holding the 3.1 updated and select it and hit ok.
    4: now your iphone should begin the update process its screen should turn white and then to the apple logo with the loading bar.
    This process works by placing the iphone-itouch in dfu mode to do a restore.
    If this does not work for you or if you cant get it into dfu you mode google iphone dfu mode and you should find a walkthru.
    Hope this helps!!

  • IPhone ringtone stopped working please help???

    I downloaded a ringtone from the ITunes store on my phone (3g) it was the first time I had done it and I set it as my main ringtone. After 2 days it stopped working and is no longer showing up on my phone. However when I synced my phone to my computer it showed up under my ringtones in ITunes, but it's still not showing up on my phone. After the sync a message also popped up saying I was not authorized to play this particular song on my phone and I'm not sure why? I downloaded it from the Itunes stores and the full song still works just no ringtone (purchased separately)Sorry if this is confusing I just need some help!
    Thanks!
    Message was edited by: katiewej

    De authorize then authorize again.

  • WRT150N router has suddenly stopped working - please help :)

    I really don' know much about how routers work, so I am hoping you all can help me.  I have a home PC and an HP notebook.  We have a cable modem and a linksys wrt150N wireless router in order to use the laptop around the house.  It was working fine up until 2 days ago, when it suddenly just stopped working.  Nothing has changed.  I've tried unplugging, rebooting, resetting the little button on the back of the router.  I've tried clearing and refreshing the IP address.  The wireless and the security lights aren't lit up anymore.  I have tried to repair but I get the errors can't acquire a network address, and can't renew the IP address.  I've tried reinstalling the cd that came with the router.  I get router not found.  Please make sure the router is properly connected.  I don't know what to do anymore.  I can't get to the router set up because I can't use the internet without bypassing the router and connecting directly from modem to computer.  Is there any way I can fix this or is this router toast?  We've only had it for 2 years.  I am running XP on the PC, and Vista on the laptop.
    If anyone has any idea what is wrong, please please let me know.  I have school work to do on the laptop and really need my wireless connection back.
    Thanks so much.

    If you are unable to configure your router using the setup disk, then you can configure all the settings on your router manually.
    Click here to configure your router for cable isp.

  • Ipod apps suddenly stop working, please help very fustrating!

    I got a new Ipod Touch and sometimes the apps I've downloaded work fine but then some of the apps, after I tap on them, will load for a few seconds and show the splash screen but then will stop working and I'll end up back on the home page, and I have to re-install them from the app store so they will work again, Why does this happen? thx!
    (Ipod 2g) (latest firmware)

    There is a thread I think similar to this
    http://discussions.apple.com/thread.jspa?threadID=1735940&tstart=30
    I had something similar happen. I ended up deleting the app and then downloading them from my computer. I have also heard that if you restart your ipod before running the app for the first time that may work. Apple though is aware of the issue.

  • Printing subsystem has stopped working - please help

    I have had my imac for 4 months and now priniting has stopped.
    I have a canon 4300 for prints and an HP office 6200 for B&W everyday stuff. The canon is directly attached via usb and the 6200 is attached to my new AEBS. i can configure my canon just fine using print and fax utility however it finds the HP via bonjour automatically but when i push ADD it gives an "error trying to add the selected printer" and the error says "successful-ok-conflicting-attributes."?
    I also seems to find the same 6200 printer as a shared printer and will config and add it ok but somehow i dont think thats correct.
    When i try to print to the canon i get an error from any application - some say not enough memory - I have 2GB. Same thing happens when i try and print to the HP. THe strange thing is that I can use the maintenance utiliies to get to the canon and it runs them so the connection is ok something with the print subsystem.

    Plot thickens, I can print to these printers just fine from my wireless attached macbook pro! Interesting it sees the HP as Bonjour and the Canon as direct attached - it does see the extra HP "shared". This seems to be isolating it to the imac and not the printers or connections. Please help this is tough,

  • IMovie stopped working please help!

    the new version of iMovie i just downloaded two days ago has stopped working, it will not even open, how do i fix this??

    Can you create a new user account on your Mac, and see if iMovie works properly from the new account?
    If so, trashing preferences might work. See my post here.
    https://discussions.apple.com/docs/DOC-4061

Maybe you are looking for