My X230 won't detect any USB devices..

hello all,
I'm from Indonesia, a few days ago I bought lenovo X230 5FA.. but every I pluged in every USB devices, it won't detect on my x230..
the devices is:
1. Sandisk Cruser Swicth 16GB.
2. USB Modem Huawei E169.
note that I use the latest driver provided by the web support device..
can anyone help to fix it?
thanks and sorry if my english not good :-P

What operating system are you running on your E330 and X230?
The answer may be found by figuring out why it works on the E330...
Have you tried to use any other devices in the USB ports besides those 2?
And were the recognized?
Did these devices ever work with your X230?
You could try to roll back to a previous driver update and see if that helps?
Here are some resources that might help you:
ThinkVantage Technologies Download
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-61432
Diagnostic Software
http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?LegacyDocID=LENV-DIAGS
Tool Box:
http://www.lenovoservicetraining.com/ion/Lenovo_System_Toolbox/pdf/Lenovo%20System%20Toolbox.pdf
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • USB won't work after I unplugged without disconnecting now won't recognize any USB devices?

    I put my Sandisk memory stick in to take some files off , i forgot to disconnect it properly so i plugged it back in and now it wont recognize any memory sticks i  put in ? How do i fix it ?

    Hello there, hales07.
    The following Knowledge Base articles provide some good recommendations:
    OS X Mavericks: If a USB device isn’t working
    http://support.apple.com/kb/PH13876
    You may also want to try an SMC Reset:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ph14222
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My macbook won't recognise any usb devices i plug in (iPod, camera etc). help!

    nothing comes up when I plug any devices into the USB port. any advice. I'm quite new to macs

    An issue with USB can be almost anything.  Check this article from Apple, as it might help you diagnose the problem. 

  • Miix 3 1030 USB OTG doesn't detect any USB device

    Two month ago I bought new Miix3 1030 tablet. I bought USB OTG cable but no devices are recognized. Can somebody suggest a USB OTG cable that is 100% compatible with Miix3 1030 tablet?

    I have this (the 3in1):
    http://www.ebay.com/itm/331437302480
    Tested to work with usb flash + mouse, usb 2.5" hd + power from miix charger, usb 3.5" hd with its own power (hd has charger).
    IT DOES NOT CHARGE THE TABLET AT THE SAME TIME, but I usually don't need that function.
    This one will also charge at the same time (tested by someone else in the forums):
    http://www.ebay.com/itm/10070TW-Acasis-H027-Mobile-Tablet-PC-Charging-Cable-OTG-Micro-USB-HUB-3Ports...

  • My MacBook won't detect some USB devices. HELP

    All boxes are checked under Finder>Preferences>General and Finder>Preferences>Sidebar. It shows up when I go Apple Menu>About This Mac>More Info...>USB but not when I check Disk Utility. HELP!
    Also, I have OS X 10.6.8

    An issue with USB can be almost anything.  Check this article from Apple, as it might help you diagnose the problem. 

  • IMac cannot detect ANY usb mass storage device.

    iMac Core 2 Duo (White) cannot detect ANY usb mass storage device including iPod. Only Mice and Keyboards work via usb. Any solutions? OS X shows absolutely nothing when any usb device is connected.

    Try resetting the PRAM. Hold down Option-Cmd--P-R together at the startup chime. Wait for two more chimes, total three, then let go to finish booting.
    Try an SMC Reset. Shutdown, unplug from power, wait ten minutes, still unplugged, hold power button in for five seconds. Reconnect to power.
    Run the Hardware Test in extended.
    http://support.apple.com/kb/ht1509
    Tried a different USB port, tried a different device besides the iPod?
    Some other ideas
    http://reviews.cnet.com/8301-13727_7-10328879-263.html

  • Audigy NX / Win XP not detected as USB Device! Can't Inst

    My NX which is under a month old all of a sudden is not being detected by Windows XP anymore. I plugged it in today (it was working fine a few days ago) and it was giving washed out music when playing a CD - like everything was muffled and the bass was dominating. I unplugged it, replugged it in but Windows detected the USB device as "Audigy NX" and tried to reinstall the hardware, but failed, and that was the end of it - It did not appear under my device manager profiles, nor could I get it to work anymore with my laptop. I removed all the Audigy NX software, unplugged everything, went into safe mode and uninstalled the drivers, reinstalled the drivers... what it comes down to is that Windows won't even detect the hardware when I pull the cable out and plug it in again. What do I do when all the drivers & problem solutions are dependant on Windows seeing my USB device. (I even uninstalled the USB roots on my computer and redetected them.. it only found my USB mouse, but no the Audigy NX.) I haven't made any hardware or software changes since I last used it - I have been operating Windows XP Home edition, SP2 with no problems with the NX up until now. Perhaps its a Windows thing, but maybe you can offer some help.
    Thanks,
    Echostorm

    Echostorm
    Try doing a Cleansweep for the sound card. This information can be found at the Knowledgebase.
    http://us.creative.com/support/kb/ar...asp?l=2&sid=72
    Jason

  • My iphone 4s won't detect any wifi networks.

    Hi
    My iPhone 4s won't detect any wireless networks.  It was working fine until last night when the connection dropped int he middle of me watching a programme.  At first I thought it was our router, but I reset that about 5 times, and all other devices are working fine on it.  The phone won't detect any other networks either - if I ask to join a network it comes up with the message "could not scan for wireless networks".  I have tried resetting the network settings as suggested on the support page, but it hasn't worked.  Can anybody help?  Thank you.

    If no change after resetting network settings on the iPhone, try restoring the iPhone with iTunes as a new iPhone or not from the backup.
    If no change after that, the iPhone has a hardware problem.

  • ITunes crashes each time I connect/disconnect ANY USB device... OR even Ethernet

    Hi,
    I use the last version of both iTunes (11.1.5 64 bits, last version detected) and Windows 8.1 on an Asus G750J (64 bits) and for several weeks now iTunes crashes EACH TIME I connect or disconnect ANY USB device (not only my iPhone, but my external hard disk or my... mouse) and even my Ethernet port...
    None of my other softawares are impacted
    Thanks for your help
    Serge

    Reinstalling the 64 bit version in the x36 programm folder seems to solve the problem but it's not satisfactory. I'd prefer to keep the advantage of beeing under the 64 bits version.

  • Hp soluation center can't detect any hp devices

    have installed the software and drivers on a acer laptop with windows vista home basic,all software and drivers installed. when i clicked on the shortcut for hp solution center it said it can't detect any hp device. but when you print the printer prints the other software works. the printer driver is installed. also when i plug the printer in the safely remove hardware said safely remove usb mass storage device - drive (f. please help thank you hp photosmart 7260

    i downloaded the software from hp,it was for windows vista 32 bit . it loads but the hp solution center said it can't detect any hp devices. the rest of the software and drivers work. thank you

  • Satellite A30: Doesn't recognise any USB devices.

    My computer doesn't recognise any of the devices when connected to the USB Port on my Satellite A30. After dowloading SP2 I was able to install the printer but I can't use it because there is no printer icon on the tool bar. If i want to print anything i get the printer window, i select the print then it goes to MS Office Image writer. Basically, I can't use my printer or any other device connected to a USB port.
    However, It was working perfectly well when I had the XP home edition but I can't reinstall that one because there is something wrong with the recovery disk that's why I had to install the XP Pro.
    Also, I used to get a sound, letting me know that a device has been connected. I don't get that anymore nor the icon on the toolbar.
    Is there anything I could do to resolve this issue please? Is it possible to obtain another recovery disc somehow? Obviously this is something to do with XP Pro software but I don't know what to do.
    Could you please help me?
    Thank you!

    Hello Juan!
    This is what the problem is the only printer window i have is the MS Office Image Writer. I do not have any other printer window. If I use add a printer, then the wizzard can't detect a USB device.
    I have just checked the link you gave me and did exactly what it said but it just doesn't help. It is not just my printer, it doesn't detect any device i connect to it. For example, I can't update my ipod anymore because the computer doesn't detect the ipod when it is connected.
    I really don't know what the problem is! It was working perfectly fine before the upgrade and for the upgrade i have used the official MS Windows XP disk.
    You woudn't know how to format the HDD by any chance, would you?
    Thank you for your help

  • MSI P43 won't boot with usb devices connected

    My system:
    MSI P43 Neo
    Intel Core 2 Duo E8400
    NorthQ Black Magic 850 watt PSU
    Corsair 4 x 2GB ram PC2-8500 1066MHz
    Seagate 320 GB hd
    Hitachi 1 TB hd
    Samsung 1.5 TB hd
    Club3D Nvidia GTX275 1,75 GB
    Samsung DVD Write Master
    When i try to boot i freezes at the detecting usb devices when i have a usb device connected. It does with any usb device. But when i boot up without any usb devices connected then i boot fine and i can connect the devices right after the detection of usb devices. How can that be?

    Googled on "computer not booting with usb code 6b38" and found this:
     Quote
    ****SLOW BOOT-UP in POST SCREEN****
    P.S. If you see the BIOS code 6B38 in the bottom right corner of the screen, this is a indication that USB Legancy support is enabled in the BIOS. If this is enabled and you have any usb devices attached such as a external USB Hard drive, your system will take ages to go through the POST boot screens.
    So disable this setting in the BIOS and the system will then boot in a matter of Seconds
    From:
    http://www.rebelshavenforum.com/sis-bin/ultimatebb.cgi?ubb=get_topic;f=30;t=000250
    Also try and see if a clear CMOS will help, some people suggested that from a old post from MSI forum here, saying its bios 1.3 thats bugged.
    So if disabling doesnt work, perhaps down/upgrading BIOS might.

  • [SOLVED] VirtualBox won't recognize host USB devices w/o root access

    VirtualBox is currently unable to detect the host's USB devices without root access. When I try to add a USB filter with user permission, the menu says
    <no devices available>
    but when I run VirtualBox as root, it detects the USB device, obeys the filter once added, and I can access the USB device from inside the virtual machine. Is there any way to get the same behavior from a non-root account?
    This user account is part of the vboxusers group and I have guest additions installed.
    Last edited by boblitz13 (2012-10-19 21:05:01)

    Well, sometimes it's the truly silly things that get you. I rebooted and VB now detects the host USB devices with regular permissions. All of the device filters are now working except the one for my NTFS-formatted external HD. The filter will grab it from the host OS but I cannot access it in the guest. I read that VB used to have a problem with USB 3.0, but that seems to have been resolved in the latest version. Is there any other explanation for why this isn't working?

  • 10.5.8 won't detect any external hard drives

    I want to update my 10.5.8 Macbook Pro which I bought in 2008.  It runs incredibly slow, and I want to reformat it before updating with Snow Leopard.  The problem is that my computer won't detect any external disc drives, so I can't back up my important files.  Is there any way to fix this, or is there something I'm missing?
    I'm also wondering if I'll be able to reformat without my original OSX install disc that came with my computer, and if so, how?  Thanks in advance.

    If you are going to be upgrading to OS X Snow Leopard, the installer for that should be able to format your drive for you before you do the installation.  I'm assuming that you have those CD's for your computer as you need discs to be able to ugrade to Snow Leopard.  What happens when you plug in an external drive?  Does it just not recognize the drive, or do you just not have it selected to show the drive on your desktop?  With Finder being the top window, click on the Finder Menu and select preferences > select general in the tabs at the top and then make sure that External discs is checked.

  • Trackpad doesn't work for 5 seconds after any USB device is connected

    This is really irritating. I could plug in any USB device - a hard drive or iPhone, and the trackpad will not work for about seconds of trying to get the pointer to move around the screen. Normally there's nothing connected to the Mac, so when something is plugged in, even if I just plug something in and walk away from it and come back some time later, if I try to move the trackpad, nothing will happen for about 5 seconds after trying to move the mouse pointer. Very strange.
    Any idea what's going on?

    Seems like a strange problem. You could try putting dbus earlier in the list, second after syslog-ng is where I used to have it. Moving to systemd might fix it too.

Maybe you are looking for