My X6 doesn't automatically close contacts after a...

Whenever I go to contacts and make a call, after I finish the call, I have to manually go to contacts and close them. They don't close automatically.
What could be wrong?

whenever you make call using the numbers in the contact, the contact option gets hidden and runs in the background. So because of this only you are to do the closing manually. No need to worry.
Nokia C7

Similar Messages

  • RV120W WAN interface doesn't automatically re-enable after WAN connection is restored

    I found that RV120W WAN interface doesn't automatically re-enable after a cable pull and re-plug.  I have to go into the Status->System Summary and click the "Enable" button.  Is this normal on this router?  Can I prevent that from happening? I would hope this is NOT normal as this would mean that I would have to be on-site and login to the web interface to re-enable it after a power failure or WAN link loss.

    Tekliu,
    Thanks for the response. But, as I mentioned in my prior post, this is, unfortunately, the designed behavior for this device, at least with a static IP and no ISP login. Cisco Small Business Customer Support was clear on this and didn't even open a ticket. I asked that they submit a feature request to change this behavior in a future release. Of course, they couldn't make any promises.
    One possible source of confusion is the different circumstances that can occur. In my testing, the interface does come back up automatically on a soft reboot. It also comes back up automatically if both the RV120W and the upstream (WAN) device are power cycled together. I believe this is because the upstream device comes up much faster and is up before the RV120W. The case we are talking about is when the upstream device is cycled or the cable is pulled while the RV120W stays up. In this case, the WAN port remains disabled until you manually select the button on the status page.
    Thanks again for following up on this.

  • Automatically close window after processing

    hi
    In my program, I open a detail-screen in a new window (target=_blank in the link properties). Users can change details of the record on that screen.
    What i want to do, is automatically close the window after the record has been processed.
    When I add "javascript:window.close()" to the Button's URL, it closes the window. However, this does not work on the Branch option, which is called after the processes.
    I also tried the option that's mentioned in the "how to create popups" tutorial, with a piece of javascript in the header (a simple function with a close() in it), which is called by the branching process. This doesn't work either. I get a "This page cannot be displayed" page.
    So my question is: how can I automatically close the window after the record has been saved?

    hi
    In my program, I open a detail-screen in a new window (target=_blank in the link properties). Users can change details of the record on that screen.
    What i want to do, is automatically close the window after the record has been processed.
    When I add "javascript:window.close()" to the Button's URL, it closes the window. However, this does not work on the Branch option, which is called after the processes.
    I also tried the option that's mentioned in the "how to create popups" tutorial, with a piece of javascript in the header (a simple function with a close() in it), which is called by the branching process. This doesn't work either. I get a "This page cannot be displayed" page.
    So my question is: how can I automatically close the window after the record has been saved?

  • I recently installed a new Airport WIFI on my I-Book G-4.  Works fine, but the WIFI doesn't automatically come on after the PC sleeps.  How to fix??

    My new WIFI works fine, but doesn't automatically give me a WIFI connection when I "power up" or even after the PC sleeps.  I probably skipped a step in the installation process, but don't know which one.  I gone back thru the installation process a couple of times, but still no luck.  I've had a WIFI previously on this IBook G4 and it worked automatically.  This is easy to get going after "sleep," but after powering back up it more difficult, since the name is no longer in the WIFI airport list.  HELP??

    Have you tried System Preferences/Network Pane. Click on Airport and then click the options bar next to the show status in the menu bar. At the top of the next window is a a question "if no recent networks are found". Click and select the automatic choice. It may work.

  • How to automatically close TitleWindow after 10 secs?

    hello,
    I've been trying several options to automatically close title window (created via popupmanager) but none is working.
    I create this window as kind of final confirmation. I want to display it for 10 secs, then close and bring user back for welcome screen. For now I only managed to impement this for close window event, but this timed closure is highly needed. Anyone could help?
    Regards,
    Akeen

    Have your tried calling your popup remove function from a setTimeout call?
    http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/utils/package.htm l#setTimeout

  • Outlook 2010 doesn't automatically re-connect after Exchange Server reboot - help

    We have recently upgraded from Exch 2003 to Exch 2010.  We also upgraded our users Outlook client from 2003 to 2010.  Now when an Exch 2010 server is rebooted Outlook does not re-connect automatically.  You have to close Outlook and re-open
    it and it starts working again.  Others have reported the same issue.  Outlooks shows the status in the status bar area as password is required.  I have read an article in the forums about it being an authentication problem.  What
    changes can I make in Outlook or to Exchange 2010 to make Outlook automatically reconnect after an Exchange server reboot.  thanks

    They connect internally in the LAN with their domain credentials.
    I haven't noticed any errors in the Exchange server related to this issue but I have not really looked in the logs right after this happens.
    I guess I just don't understand how when we were running Exch2003 with Outlook2003 we did not have this problem.  Now that we have spent all this money and upgraded to bigger, better, smarter software we are having a problem like this.  It seems like
    if Outlook senses the lost connection and transfers to Offline that it would keep periodically to see if the email server is back up and reconnect. 
    Sorry for the delay response.
    I would suggestyou create a new Windows profile and test it again. Some times the windows profile curropted and woithout being able to provide credentials.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • Compiz doesn't automatically start anymore after gnome 2.30 update

    My logs only show this "Apr  1 18:15:26 arch gnome-session[2435]: WARNING: Application 'compiz.desktop' failed to register before timeout" error. But i'm pretty sure it always showed that error even before i upgraded today.

    Is it starting for you when you use "compiz --replace &" in terminal? For me it is, but without emerald, so I don't have any window borders...
    EDIT: OMG, when I used Fusion-icon then it started normally... Weird...
    EDIT2: I've changed in /usr/share/applications/compiz.desktop line where compiz is started from "compiz" to "/usr/bin/compiz ccp" and it's working now.
    Last edited by megawebmaster (2010-04-01 20:15:46)

  • I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.

    I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.

    Thank you for responding.  I decided to upgrade to Acrobat 11 and it is now working fine.
    There was no error message - the documents just closed. J.R. Ledbetter, CPL
    5614 Turfwood Lane
    Houston, TX 77088
    Tel. 832/657-7027
    email [email protected]
          From: Anubha Goel <[email protected]>
    To: J. R. Ledbetter <[email protected]>
    Sent: Thursday, March 5, 2015 8:12 PM
    Subject:  I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.
    I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.
    created by Anubha Goel in Acrobat Installation & Update Issues - View the full discussionHi jr_ledbetter, Could you please let me know if you get any specific error message when the PDF closes automatically.Does Acrobat opens as itself or not?You might need to refer the KB doc link mentioned below:Doesn't launch after 30 days
    Installed as part of a CS6 suite Let me know if this helps. Regards,Anubha If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7258293#7258293 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7258293#7258293 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Can you make core center automatically close after being called on startup?

    Can you make core center automatically close after being called on startup so it can set cpu fan speed to a slower fixed speed then exit?
    If core center really cant do such a simple task then can speedfan or another program?

    Quote from: bassmadrigal on 13-July-05, 07:42:36
    Why don't you want them running. Speedfan has a very small footprint.
    Just seems unnecesary seeming as it does its task as soon as it runs and its changes then stay applied. Speed fan is probably better but core center takes 10mb.
    Quote from: syar2003 on 13-July-05, 07:57:02
    You dont have to have it running to set a user specified fan rpm .
    Once it's set it is stored in the corecell/cmos chip on the motherboard .(until a cmos reset) .
    So to answer your question .
    There is no need to have it autostarted at each boot ...
    Thats how i have used it .
    Only reason to have it running is with MSI's "CnQ" control of the fan , varies with the load of the processor
    Thats strange for me the speed resets to default as soon as I restart my pc (about when the bios engages which is however tangibly after the graphics card fan revves up to its full speed). Depending on the temperature of the proccessor it goes to 3300rpm (less than 42c) or 4500rpm (too loud for ~45c IMO and MSIs "cool&quiet" option seems to agree, it doesn't even set it as high as 3300rpm)

  • When using Acrobat - Adobe Software License Agreement Pops Up - Accept doesn't seem to work - Application then automatically closes when existing the License Agreement pop up - Whats going on?

    When using Acrobat - Adobe Software License Agreement Pops Up - Accept doesn't seem to work - Application then automatically closes when existing the License Agreement pop up - Whats going on?

    Please try :
    Software License Agreement reappears after you click Accept
    Adobe's  "accept license agreement" pops up way too much and ruins UX
    Repeatedly asked to accept license agreement
    Hope it helps you.
    Regards
    Rajshree

  • How can I automatically close a dialog box using Javascript after I click the OK button to submit it?

    How can I automatically close a dialog box using Javascript after I click the OK button to submit it? I don't want to have to X out of the dialog box after I am done.
    Thanks
    Linda

    JS can not interact with open dialogs in any way, unless it's a dialog
    created in JS using the Dialog object.
    On Thu, Jul 24, 2014 at 11:13 PM, lindaeliseruble <[email protected]>

  • SAP system doesn't automatically start after restart (but manual start ok)

    Hi,
    We've got a new production line of SAP EP 7.0 systems, which have CI on HP-UX and DIs on windows. The version is NW2004s SPS09.
    What we see is that after a restart of the windows servers (usually because of windows patching), the SAP system doesn't automatically start up. It doesn't start up if I restart the SAP<SID>_<instance> service either. 
    However, I've got no problem starting the system with the MMC.
    Any idea what I am missing here? is it as simple as a profile parameter ?
    As far as I can see the profile used seem ok.
    After a restart of the windows server the following files have log entries in the c:\usr\sap\<SID>\J<instance>\work folder
    sapstartsrv.log
    trc file: "sapstartsrv.log", trc level: 0, release: "700"
    Fri Nov 17 15:51:26 2006
    <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
    sapstart.log
    Starting WebService thread
    SapSSLInit failed => https support disabled
    Webservice named pipe thread started, listening on port
    .\pipe\sapcontrol_97
    Webservice thread started, listening on port 59713
    sapstart.trc
    Starting WebService thread
    SapSSLInit failed => https support disabled
    Webservice named pipe thread started, listening on port
    .\pipe\sapcontrol_97
    Webservice thread started, listening on port 59713
    The windows event log have the application events
    (first)SAP Service SAP<SID>_<instance> successfully started.
    (at the same time)
    Failed to update service environment from user (STATOIL-NET\<sid>adm) environment. [ntservmgr.cpp 201]
    (note that this doesn't happen for all systems which have this problem, for other there is no entry like this)
    I see no failed login attemps in the security event log, but see the that a login is performed for SAPService<SID>.
    Since it also fails to automatically startup when I restart the service, I am able to use filemon to see what happens at a file level. Here I see that it can access the shared file system without any problems, and can read the profile and everything.
    MOM is running on the server and gets some Access denied errors since it doesn't have access to the shared file system, but I don't think that matters.
    Cheers
    Dagfinn

    hi  we are using sap bw 3.5 . database is oracle 9i
    i applied a kernel patch and when i tried to start the services . there was no problem with the oracle services  and saposcol but the service sap<sid>_nr did not start .
    when i went to check the error in work folder ..
    it say " SapSSLinit failed => https support disabled  .
    then i tried to start sap from cmd pmt . din`t work .
    is there a way to statrt this ...
    thanks alot.
    arjun

  • Acrobat XI Pro automatically closes itself with no messages etc. after few seconds

    Greetings all,
    I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggested at some other posts in the forum:
    I checked the "security settings (enhanced)" tab but the protected view option is already off.
    I searched for the eula.exe under the "Program Files (x86)\Adobe\Acrobat 11.0" folder but there is no eula.exe. May it be not present because I installed it as a part of CS6 Master Coll. package?
    I am using Eset Endpoint Antivirus as a third party Anti Virus Software.
    The problem occurs when:
    I open up a pdf file from outlook etc.
    I manually open a pdf file from windows explorer
    I open adobe acrobat with no file to view
    As I mentioned above, I see no error messages or warnings during the closing down. It acts as if I clicked the close button on the top right corner. I know that there are a lot of posts in the forum about this issue, but none of them helped me to solve my problem. I would be glad if you can help me with this problem.
    Thanks,

    Hey i was having this issue also with Adobe Acrobat pro... it only seemed to be affecting one program that produced PDF output automatically. When the processes finished the PDF is supposed to be displayed and instead it would rapidly flash across the screen and close. THen i would have to hunt for the PDF to review its content. I tried a couple of things like deleting my preferences for acrobat C:\Users\[your user name]\AppData\Local\Adobe\Acrobat\10.0. You might have to show hidden files. In the explorer window select Organize-> Folder and search options-> once that opens view -> check show hidden files, folders and drives. then navigate that path above. Make sure adobe is closed then delete everything in there or move it off to another folder if your worried it will break it further.
    That did not fix the problem though. I opened the application and ran my process again same results (adobe closes pdf auttmagically). so i opened adobe acrobat and navigated to Edit -> Preferences -> look under the General tab and click the select default PDF handler and that seemed to fix my problem. I also disabled the enhanced security look further down in that list under security enhanced. then a reboot so it is possible that the enhance security setting was the cause i think i will play with that for a minute to see if it was but i think my issue was the default handling. good luck

  • Form automatically close after receiving a specific number of submissions?

    Hello,
    I am using the form as a registration tool for an upcoming event.  How do I get the form to automatically close after receiving a specified number of submissions?  There are only 15 spots and 700+ folks may see the form.  I need for only the first 15 to have access to the form.  Thanks.

    We don't currently have an automatic way to close a form after a set number of submission. You would have to watch for submission and close the form manually.
    Andrew

  • I-photo has been working brilliantly until after my last update. Now it automatically closes after 10 seconds. The warning box appears but offers no solution. I have reloaded the software, but this has made no difference. Has anyone else experienced this

    I am having problems with i-photo. It automatically closes after 10 seconds. the warning box gives no guidance. Anyone else had this problem?

    What "warning box"?
    Assuming you're using iPhoto 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

Maybe you are looking for