My xperia j can't install new application

hello,
my xperia j just now had full storage in phone memory, but i already uninstall some apps. there just left two social media and one photo editor apps. whenever i open setting, apps, and then my phone memory had 50mb free. and i can't install new application because had no sufficient
please help

I've tried helping you but if you still have no room then without me having the device in front of me then we could spend months playing this games of back and forth - Try a factory reset but remove your SD card 1st

Similar Messages

Can't install new applications without administrator...which is me.

Currently, I cannot install any new software on my mac. I have a PowerMac G5, dual 2-Ghz 2-GB RAM, OS 10.3.9. Whenever I attempt, it tells me that I need to be (or contact) the adminstrator, which I am; most often, I can get an "authenticate" option where I can simply re-type my password. Other times I don't get the option and the install shuts down. This all happened after I ran the drivers for the Arduino microprocessor. Any ideas?

Paul Pontious wrote:
Currently, I cannot install any new software on my mac. I have a PowerMac G5, dual 2-Ghz 2-GB RAM, OS 10.3.9. Whenever I attempt, it tells me that I need to be (or contact) the adminstrator, which I am; most often, I can get an "authenticate" option where I can simply re-type my password.
This sounds like normal behaviour. The OS is supposed to ask you to approve changes that are system-wide. Or am I missing your point?
Other times I don't get the option and the install shuts down.
This, on the other hand, does not.
This all happened after I ran the drivers for the Arduino microprocessor. Any ideas?
The suggestions about first aid sound like good ones... Before repairing permissions, verify the disk and make sure it says it "appears to be OK".
- cfr

Can't install new applications, help!

When I try to intall new apps it comes up with someone elses iTunes email address and is asking for their password? I have no idea who the email belongs to. What can I do?

Connect to your computer, with your iTunes Store account logged in, and sync. The iTunes account link on the iPhone is set based on the active account on the last computer to which the iPhone was connected.

Can't Install New Apps

I can't install new applications to my iPod Touch. I've restored the iPod, reset both it and the computer but it still won't work. The unknown error code is 0xE8000050.

You may want to test with a different free app. Also try to restart the device, and try to sign out then back in the iPhone.
Turn off Cellular data as that won't work if it's a huge app.

TS2446 Hi! I tried to update a few apps from AppStore and to install new applications, but i got a message : " your Apple ID HAS BEEN disabled" !!! Please help me!!! What can i do now? How can i use my Apple ID? Please, i need help, i have this ID for 2de

Hi everyone!
I tried to update a few apps from my iPhone, and to install new applications from APPSTORE. But i got a message :" Your Apple ID has been disabled"!!!!!!
What can i do now? Can you help me please?
The same thing happend with my IPAD....
How can i do to function all this in the same way which was working till this problem appears.
I want to mention that i have 2 email adresses asociated with the same Apple ID.
wait for an feedback!
Thanks a lot!

Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it

I can't update or install new application on my iPad 2, please what can I do to solve this problem

I Can't update or install new application on my iPad 2 with retina displa running on iOS 8.1.2.
when I wanted to update, it was rolling for so many days and nothing happen. I don't know what to do.

Hello, DGVLIMITED.
Thank you for visiting Apple Support Communities.
I would need clarification on what exact issue you are experiencing and any errors when attempting to update applications to provide a better answer. However, try updating applications individually. This could be a capacity limitation when updating all at once. Also, try restarting the device. If these steps do not resolve the issue, try the remaining steps in the article below.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update(iOS 5 or later) or connecting your iOS device to iTunes and clickingCheck for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/en-us/HT201400
Cheers,
Jason H.

How to install new applications from my i tunes to i touch

how to install new applications into my i touch without losing the existing ones

Please help me.. I downloaded free applications from apple store, I can see it on the Library's application tab but cannot install it on my iTouch since there is no Application tab on my device. How can I install it? I already updated my iTouch to the latest software.
Thanks in advance..

HT2731 how can i install free application in my iphone 4s i am a student and i haven not a credit card. help me

how can i install free application in my iphone 4s i am a student and i haven not a credit card. help me

There are instructions on this page for how to create a new account without giving a credit card number : http://support.apple.com/kb/HT2534 e.g. select a free app in the store and click on 'create Apple id' when 'buying' it

How can I install new windows on NB200-10z without a CD drive?

Hi,
I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
I would like to do a recovery, but it also doesnt work.
I know there is a shortcut like press the 0 button when the laptop is starting up.
With this shortcut you can start the recovery to reset the software.
But when I press the 0 button it gives me an error.
So I think the recovery drive/partition is lost.
How can I install new windows on this minilaptop without a CD drive?

I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
+Message was edited: link has been removed+

Can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion

can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.

What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
You can't run an OS older than Mac on it.
But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS.

I can not install new update in Photoshop CC, does any one know, how I can install the new update?

I can not install new update in Photoshop CC, does any one know, how I can install the new update?
Photoshop CC show me, if I look on "Help" -> Update, there is no update. But my actual license is very old....
I tried it, to do it manual. But there is also some problem.

totally agree. at this point i could care less if "apple" supports it. i'm not renting my ipod touch, it's mine. i paid for it. and i'm not asking to do anything illegal with it, all i want is to get rid of this POS ios6 and get back to being able to use my ipod touch the way it was before...working.

I just upgraded to 10.7.3 and now I can't install any applications.

I just upgraded to 10.7.3 and now I can't install any applications. Everything else in the OS and in applications seems to work OK. After the installers ask for the system password, they do nothing. I doesn't hang; it just won't proceed any further in the install process. I can press the back button and it seems to do that just fine. I repaired the disk permissions, but to no avail.
After I installed 10.7.3, I tried to install an updater that was listed as being recommended for Time Machine users. That was the first time I tried to launch an installer of any sort and it did the same as above. I've gathered since then that the update wasn't necessary and was already included in the 10.7.3 I loaded today.
Any hints?

I'm having a similar problem after installing 10.7.3 and the Messages beta. I've unistalled Mesages with little bit of trouble.. Linc, I followed the step given in your final post any help would be appreciated.
A screenshot of my actual error. I get this error not just for Flash, but also Handbrake. I receieve th error even when I try using a programs automatic update. However, not suprisingly I do not get the message when using Apple's software update.
Step 1 results
com.symantec.kext.internetSecurity (1.3.2f5)
com.symantec.kext.ips (3.2f8)
com.cisco.nke.ipsec (2.0.1)
com.symantec.kext.SymAPComm (11.1.2f17)
Step 2 results
org.macosforge.xquartz.privileged_startx
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon
com.symantec.sharedsettings
com.symantec.Sched501-2.plist
com.symantec.Sched501-1.plist
com.symantec.navapdaemonsl
com.symantec.navapd
com.symantec.MissedTasks.plist
com.symantec.diskMountNotify.plist
com.symantec.avscandaemon
com.micromat.TechToolProDaemon
com.google.keystone.daemon
com.bombich.ccc
Step 3 result
org.macosforge.xquartz.startx
com.symantec.uiagent.application
com.prosofteng.DGMonitor
com.micromat.TechToolProAgent
com.google.keystone.root.agent
com.google.Chrome.framework.service_process/Users/damian/Library/Application_Sup port/Google/Chrome
com.ecamm.printopia
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
Step 4 result
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
Frameworks
NyxAudioAnalysis.framework
PluginManager.framework
R.framework
TSLicense.framework
cisco-vpnclient.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
.DS_Store
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
Unused
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.google.keystone.agent.plist
com.micromat.TechToolProAgent.plist
com.prosofteng.DGMonitor.plist
com.symantec.uiagent.application.plist
org.macosforge.xquartz.startx.plist
/Library/LaunchDaemons:
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.google.keystone.daemon.plist
com.micromat.TechToolProDaemon.plist
com.symantec.MissedTasks.plist
com.symantec.Sched501-1.plist
com.symantec.Sched501-2.plist
com.symantec.avscandaemon.plist
com.symantec.diskMountNotify.plist
com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist
com.symantec.sharedsettings.plist
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon.plist
org.macosforge.xquartz.privileged_startx.plist
/Library/PreferencePanes:
Flash Player.prefPane
Flip4Mac WMV.prefPane
SymantecQuickMenu.prefPane
TechTool Protection.prefPane
/Library/PrivateFrameworks:
SymAVScan.framework
SymAppKitAdditions.framework
SymBase.framework
SymDaemon.framework
SymIPS.framework
SymIR.framework
SymInternetSecurity.framework
SymScheduler.framework
SymSharedSettings.framework
SymSubmission.framework
SymUIAgent.framework
SymUIAgentUI.framework
/Library/PrivilegedHelperTools:
com.bombich.ccc
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Google Earth Web Plug-in.plugin
WebEx.plugin
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.E9E876AD-F4B4-43BE-A4F2-EC7 33492E799.plist
com.ecamm.printopia.plist
com.google.Chrome.framework.plist
Library/PreferencePanes:
Printopia.prefPane
Step 5 result
AdobeResourceSynchronizer, iTunesHelper, Air Video Server

I brought I pad air 3 months ago, but recently I can't install any application and can't make an update. Even I can't install the free application. I can see ... There is a previous purchase problem please Singh up your bank information again. Plz help

Hi , I brought an I pad air 3 months ago. But recently I can't install any application and can't update any application. Even I can't install any free application. I can see one dialogue box about in red colors " there is a previous purchase problem please type your bank information correctly" . So I don't know what to do please help me. Thanks

The message implies that a previous purchase may not have been paid-for due to problems collecting the money from your account. Have you tried logging into your account and updating/changing your payment details (tap on your in Settings > iTunes & App Store on your iPad and tap 'view Apple id' on the popup and sign into it) ? Until there is an accepted payment method on your account (credit card, redeemed iTunes gift cards) and what you owe has been paid then you won't be able to download anything (including app updates).

Can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

I can't install any application on my ipod. it needs a higher sofware version. how to upgrade it's software to 4.3? i have 2.1

i can't install any application on my ipod. it needs a higher sofware version. how to upgrade it's software to 4.3? i have 2.1

khristianfromaparri wrote:
i can't install any application on my ipod. it needs a higher sofware version. how to upgrade it's software to 4.3? i have 2.1
You won't be able to update to 4.3. Depending on which version you have, you may be able to upgrade to 4.2.1. Check out the Apple articles below for info.
http://support.apple.com/kb/HT1353
http://support.apple.com/kb/HT2052
Stedman

My xperia j can't install new application

Similar Messages

Maybe you are looking for