My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop

Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?

*Moved to Android development*
Hopefully you can get some help here.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • "Apple page not found" error after installing iOS 6 and trying to connect to wifi on iPad 2, how do I fix this?

    SO I just installed the new iOS6, and the wifi is working (posting on my iPad 2 right now). However it won't let me use safari, and every time I select my wifi network, it shows the full strength signal. But before I can do anything it loads a page in an attempt to connect to apple.com, that says "apple page not found." I can then navigate the apple website, but there is no address bar. I try using safari and it says I am not connected to a wireless network. I know this is a problem with iOS 6, so has anyone heard how to fix this? Or is anyone having this problem as well?

    Reading some older threads from 2012 and 2011 it appears the problem was present even then.  Part of the problem was due to people using multiple or different account id's on the various devices.  In my case, I only have one ID and it is the same on all devices yet the iPhone and iPad are still throwing the same error when I try turning on iTunes Match.  This is very frustrating . . . any help out there?  Thanks.

  • Unknown error after install itunes 8 and starting Genius

    I can no longer connect with my AirTunes. Each time I try I get an "unknown error (-3256)" message.
    Tried restarting and reconfiguring, no go.
    Anyone else experiencing similar difficulty?

    I am having the exact same problem. I checked what version of Airpot Utility I am using and it is 6.3.
    I checked for any updates and there was one for Front Row. The update said it would fix problems with ITunes also. But still no luck.
    Can anyone help?
    Thanks

  • Kdcom.dll error after installing NI-DAQmx 7.5/8.5 on Windows XP Pro

    We are trying to switch from including a fully computer drawer in our product to just using a SBC (Single Board Computer).  In the past we have used Pentium 4 boards with the NI-DAQmx 7.5 suite and had no problem.  The current board we are testing useds the Intel 855GME GMCH chipset with a 1.0 GHz Celeron M Processor.  After installing the software and I am prompted to restart, and upon restart a notorious Windows blue screen of death comes up saying that there was an error error with kdcom.dll.  (exact error below)
    A
    problem has been detected and windows has been shut down to prevent
    damage to your computer.Stop:
    0x0000007E (0xc0000010,0xFAFF2A0,0xF7A16344,0xF7A16040)
    kdcom.dll
    – Address F7AFF2A0 base at F7AFF000, Datestamp 3b7d8346
    I have installed both DAQmx 7.5 and 8.5 getting the same results with both.  I have tried to disable all of the onboard functionalities of the board (video, ethernet, sound) and still I have gotten this same error.  (Note: I have done default installs as well as full studio installs)
    Has anybody seen this error before and knows what is causing/how to stop it?
    Is it quite possible that the NI-DAQmx 7.5/8.5 software/drivers are just not compatible with this SBC?
    Here is a link to info/specs about board that I am having trouble with: WinSystems EBC-855
    Thanks

    Hi,
    I'm not sure that this is a DAQmx related issue. A Google search reveals that kdcom.dll is a Windows dll - what leads you to believe that DAQmx is involved? I'm not a Windows supporter, but there do appear to be a few discussions in that search with issues very similar to yours - did you try replacing that dll? As long as your computer is an x86 architecture and/or on a supported OS, DAQmx should be able to run on that machine. You may want to hit up WinSystem's support to see what they have to say from the computer side.
    Hope this helps, please don't hesitate to post back if DAQmx is the culprit or if you have any additional questions.
    Cheers,
    Andrew S
    National Instruments
    Getting Started with NI-DAQmx
    Measurement Fundamentals

  • Xperia Mini Pro SK17a, when will ICS available ?

    After more than a year waiting for very annouced ICS update for 2011 Xperia mobiles, Sony has removed SI list with nothing for my Xperia Mini Pro [SK17a] SI 1249-8103. I´d like to say that I´ve chosen SK17a mobile because Sony officially annouced that their 2011 Xperia line would be updated to ICS on 2012 march or april, right now I feel like an idiot for believe in this "well-known" company promise and also because I have a Sony SK17a running 2.3.4 version forever.

    this should explain it
    http://developer.sonymobile.com/2011/12/07/ice-cream-sandwich-from-source-code-release-to-software-u...
    The Certification and approval phase: Making sure the software and hardware is compliant
    A phone comes with parts and software working with a number of different technologies, such as Bluetooth, Wi-Fi, modem and so on. To use these technologies, we have to certify that the new software is compliant with these technology standards. We therefore need to certify a new software release for all of these different technologies due to operator community requirements (GCF , PTCRB , CCF) and Intellectual Property Rights (IPRs), if we have modified the software module related to such technology.
    To a great extent, we try to get global certifications, but in many cases specific countries demand specific tests. For a global, worldwide product, we need local certifications approvals in up to 80 countries. For all these external certifications we are either allowed to test ourselves, and submit evidence that we passed, or we can get external test houses, such as Cetecom, to perform the tests.
    Besides the operator and IPR certifications, we must externally comply with certifications for regulatory requirements. For example, we must show evidence that we comply with spurious emissions, SAR,EMC, as well as other environmental and health compliances. But when it comes to software upgrades for existing phone models, not all of the regulatory certifications are needed as they have already been performed once.
    On top of this, Sony Ericsson is doing internal self certifications in areas we have identified as extra important to deliver the highest possible quality.
    All certifications are based on each phone model, and even if a phone model has been certified with a previous software release, the parts which have been changed must be recertified if we are doing a new software release. So if we, for example, have made changes to the Wi-Fi module in an existing phone model, we need to recertify it. When we are working with a new Android release, such as Ice Cream Sandwich, all the affected areas must be recertified.
    Another example is if the Bluetooth stack is changed. Then we have to recertify the Bluetooth part of the new software release. There are many apps that needs to be recertified for each of our phones, if they are changed in a new Android software release, for example Bluetooth, MMS, Wi-Fi, HDMI, DLNA and Adobe FLASH. Besides this, we rerun the Android Compatibility Test Suite (CTS) to make sure that we are compliant.
    Contrary to what people may think, it is not the Bring up phase, but the Certification and approval phase that is the most time consuming process when it comes to getting a new software release out on our phones. This is one of the major tasks that are legally required from us as phone manufacturer, but is a task that the custom ROM community doesn’t have to take into consideration. Furthermore, by putting all this efforts into testing and certification, we ensure that quality and conformance is at a top level, in benefit for all consumers worldwide.
    Additional approvals might be needed
    In some cases, the new and complete software release has to be approved to be used in all the different networks that our phones should work in. Many operators also want to customise the software according to their requirements, which in turn are based on their market, network, differentiation and business model. We implement all of these customisations and create a variety of software packages and releases for each operator.
    When all of this is done, we are ready to roll out the software release variants as software upgrades to operators and consumers around the world. The software upgrade can then be downloaded and installed either in the operator’s own update tool (if they have one), from Sony Ericsson’s PC Companion tool, or by over the air updates (FOTA – Firmware Over the Air).
    It should be pointed out that this summary of all the activities and phases is somewhat simplified and is meant to provide a general picture of what we do from the release of the first Ice Cream Sandwich source code, until it is released to our consumers. From Sony Ericsson, we hope it has shed some of light on the work being done for the software upgrades.
    If you have any question on this topic, feel free to drop us a line below. We will try to respond as soon as possible. For general software announcements and product information, please check the Sony Ericsson Product Blog regularly.
    is Sony spying on users in this forum?
    http://talk.sonymobile.com/thread/60197
    Don't forget to mark the Correct Answers & Helpful Answers
    RELATED topic, if you have some time please check this thread
    http://talk.sonymobile.com/message/244522#244522
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Read/Write errors after installing SSHD

    After installing a Seagate Thin 500GB SSHD into my Late 2008 MacBook Pro, I would get errors after my computer had been asleep for several hours.  The error codes end with -50.  I thought that limiting the speed of the drive with a jumper would work, but it hasn't.

    This is from the Toshiba knowledge base : http://forums.toshiba.com/t5/Computer-Troubleshooting/Errors-after-installing-new-advanced-format-ha...
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Problems with Android 2.1 for Xperia Mini-Pro: no Twitter on Timescape and not all contacts restored - please help!

    Hello all!  I own an Xperia Mini-Pro which I updated with Android 2.1 yesterday.  Having some problems, the main ones being: 1) Timescape does not allow me to sign in to Twitter (it claims my username and password are incorrect, despite successful log-ons with the same details via Twitter Mobile); and 2) not all my backed-up contacts have been restored to my phonebook (and yet they still exist somewhere in the phone - I know this because I can bring up full contact details for people who've sent me SMS - but I cannot find them if I use the phonebook interface).  Someone please help?  Cheers - Jos

    I suggest that you try to clear data and any cache in for the Timescape app.
    Menu> Settings> Applications> Manage Applications> Click on the first hardware button (the one with four squares)> Filter> All> Timescape> Clear data and any cache.
    Then check if you get the same error when trying to log in to Twitter.
    Regarding the contacts I think you should check if they maybe filtered in the phone book. Open the phone book and click on the first hardware button (the one with four squares) > Contacts to view.
    Check if some of your contacts might be filtered.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Sony ericsson xperia mini pro

    To read pdf and excel files what i have to install in my mobile? my mobile: sony ericsson xperia mini pro.
    Solved!
    Go to Solution.

    you should really look into using google docs on your computer and phone
    https://market.android.com/details?id=com.google.android.apps.docs&feature=search_result#?t=W251bGws...
    try this app too
    https://market.android.com/details?id=com.dataviz.docstogo&feature=search_result#?t=W251bGwsMSwxLDEs...
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • N97 Mini - Apps Installation error after update to...

    Dear Nokia Team:
    I have an error after installing the update to v30.2.004 with PC nokia software updater (I received the succefully message of correc install of update):
    N97 mini RM-553
    30.2.004 (16-06-11)
    30.2.004.C01.01 816.06.11)
    language: 29
    Error: After installing this update I coud not install application correctly in my phone.
    I have made a hard reset to the phone twice... same situation.
    Extrange is that I could install a few apps from Nokia Store (v. Ovistore_5250_prdsrv_1_16_006_40756) but other are impossible.
    Also copying the installation file to the phone, is the same...
    I have also the problem with app rpovided by Nokia in Store or in Beta Labs.
    I have installed:
    Cars racing free (from nokia Germany)
    Notifications (from Nokia)
    Doodle jump
    Need for speed shift
    Nokia store (replaces Ovi store) Ovistore_5250_prdsrv_1_16_006_40756
    Not possible to install:
    Java 2 beta 2.1 (betalabs)
    Nokia boots (betalabs)
    Nokia drop (nokia)
    Mazelook
    opera mini browser
    skype
    timer touch
    Upcode
    Nokia Battery monitor 1.3
    soft update SW:
    shows pending update for Music Player 15.2 (1034) : not possible to install, error received
    correct update history: Ovi maps 3.6 // Photos 1.0 // Ovi music 11.4 // Internet radio 2.2
    Could someone on Nokia support could help?
    Some one from Nokia's team?
    Please let me know if you need additional information to take care of this bug...
    I do not want to buy a new phone... but without the option to install applications...
     Many thanks in advance
    Dongatop.
    N97 mini.

    in first hard reset (HR) I used the option of pressing the keybord keys.
    In the second HR, first I format the E: disk with the file administrator, and then I use the code: *#7370#
    the after the HR i reinstal the mobil soft with PC nokia software update.
    I received the message of OK.
    next, I run Ovi suite update and instal the optional updates (descrived in the post)
    I also check them SW in the phone for OTA update, there i find the first error, regarding nokia music player.
    shows pending update for Music Player 15.2 (1034) : not possible to install, error received
    I start web explorer and goes to Ovi web page.
    after been informed of an ovi App update I douwload and instal Nokia Store (that replaces Ovi Store) "Nokia store (replaces Ovi store) Ovistore_5250_prdsrv_1_16_006_40756"
    then, in Nokia store I try to instal "My Apps" from my history. here I receive errors with some of them and not with others...
    i also could not instal app if i download them directly to the phone, like from betalabs.
    many thnaks in advance for your help.
    Dongatop

  • Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)

    Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
    Uninstalling and installing again - nothing change.

    Hi slawek,
    Please refer to the thread below where this issue has been discussed:
    Error code 50
    Regards,
    Sheena

  • Error after Install SAP NetWeaver 7.01 ABAP Trial Version

    Hi Everyone,
    I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
    It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
    Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
    Error! Connection failed to node (local) for database NSP:
    -24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
    -24832,ERR_SHMNOTAVAILABLE: Shared memory not available
    -24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
    Someone could help me?

    Hello Marques Polastri ,
    ->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to  C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
    Try to connect to the database NSP & let us know the results.
    -> Please update with output of the following commands:
           dbmcli db_enum
           dbmcli -d NSP -u <control>,<pwd> db_state
    Thank you and best regards, Natalia Khlopina

  • Windows 8.1 Pro not booting after install of Hyper V - ASUS z87 + intel 4670K

    Hi,
    I am running windows 8.1 pro on a intel 4670K 4th Gen Haswell CPU and ASUS z87 plus motherboard. 16gb of kingston hyperx ddr1600 memory.
    I have enabled virtualisation technology in the bios.  CPU has SLAT.... or Extended Page Table, as intel likes to refer to it.
    When I install HyperV platform and management tools the computer configures and reboots
    AFter reboot it brings up the blue window image and spinning circle of dots for a while then reboots. It does the same thing again and then reboots and goings into repair mode and asks me to do a system restore. It then restores to before they HyperV install.
    I've tried turning off xHCI mode (i.e USB 3.0) in the bios as this seemed to be a known issue with some gigabyte boards. This did not rectify the issue
    Updated to latest asus mainboard bios 1405.  Same issue still occurs upon install of hyper V.
    Automatic repair does not work and I have to restore from system restore point.
    I performed a clean boot after installing the feature and it still couldnt boot to windows.. it just sits at windows logo and then restarts a few times and then launches the startup repair. Once the startup repair begins, the only way I can get into windows
    is restoring to a system restore point from before the hyperv feature install.
    Please see the following logs which may have further information:
    CBS Log 
    https://skydrive.live.com/redir?resid=1F523A0B8734322C!685&authkey=!AGMjUfosLFpzYNI
    Setuperr
    https://skydrive.live.com/redir?resid=1F523A0B8734322C!682&authkey=!AKS8Jb1S6W2IAH8
    Windows update
    https://skydrive.live.com/redir?resid=1F523A0B8734322C!683&authkey=!AJdWKuKj4negBoQ
    Windowsupdate(1)
    https://skydrive.live.com/redir?resid=1F523A0B8734322C!684&authkey=!APplVjuLpNZW_AY
    I logged a job with asus support and their response was:
    "Clear CMOS and ensure virtualisation technology is turned on in BIOS. If it still doesn't work, seek assistance from Microsoft"
    Previously asked this question but took a while to get back to update with the logs and it was listed as Answered.
    This issue is still existing and I'd appreciating any assistance. 
    Simon

    Hi Simon,
    Thank you for uploading the Log files.
    According to the log files, no actuate clue can be found. 
    So, I suggest you upload the dump file so that we can help you analyze them.
    Automatic Memory Dump Settings on Windows 8:
    http://www.thewindowsclub.com/automatic-memory-dump-settings-windows-8
    It also applies to windows 8.1.
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing,
    privacy, and collaboration:
    http://skydrive.com
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

    eth0      Link encap:Ethernet  HWaddr 00:15:17:F7:81:53 
              inet addr:192.1.1.11  Bcast:192.1.1.255  Mask:255.255.255.0
              inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:100
              RX bytes:0 (0.0 b)  TX bytes:15868 (15.4 KiB)
              Memory:dfcc0000-dfce0000
    eth1      Link encap:Ethernet  HWaddr B8:AC:6F:92:C2:0C 
              inet addr:192.1.1.9  Bcast:192.1.1.255  Mask:255.255.255.0
              inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
              TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:18959341 (18.0 MiB)  TX bytes:9476 (9.2 KiB)
              Interrupt:169 Memory:dfbf0000-dfc00000
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:4035655 (3.8 MiB)  TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
    Thanks
    A/A

    This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
    Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
    It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
    # netstat -rn
    # cat /etc/resolv.conf

  • Final cut pro wont open after installing universal upgrage

    my Final cut pro wont open after installing universal upgrage, I installed just the FCP 5 from the universal disc i got from apple now it wont open goes almost all the way then simply quits without explanation
    I am afraid to instal the other apps for fear I would lose everything
    whats causing this?

    Download and run FCP Rescue. It fixes a lot of things.
    Shane

  • Relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express)

    Hi,
    I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
    I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
    After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
    =========================
    Relinking module 'ADCONV.exe' in product fnd ...
    gnumake -f
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
    D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
    Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
    *** target pattern contains no `%'. Stop.
    Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
    Relink of module "ADCONV.exe" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'AFTBLGEN.exe' in product fnd ...
    gnumake -f
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
    D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
    Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
    2010
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
    *** target pattern contains no `%'. Stop.
    Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
    2010
    Relink of module "AFTBLGEN.exe" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'APPR60UE.dll' in product fnd ...
    Removing any existing temp directory
    rm -rf temp
    creating the temp directory
    mkdir temp
    changing permissions for the temp directory
    chmod 777 temp
    Getting the object file names for this APPR60UE.dll
    gnumake -f
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
    appr60ue.LIST
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
    *** target pattern contains no `%'. Stop.
    Unable to get the objects for module "APPR60UE.dll".
    See error messages above (also recorded in log file)
    for possible reasons for the failure.
    adrelink is exiting with status 1
    =========================================
    Has anyone faced something similar in the past?
    Regards,
    Neeraj

    Hi Helios,
    That got resolved after I added the location of the dll in the PATH.
    Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
    The log looks like:
    Relinking module 'fndcpesr.exe' in product fnd ...
    gnumake -f
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
    D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
    Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
    2010
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
    warning: overriding commands for target
    `D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
    warning: ignoring old commands for target
    `D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
    warning: overriding commands for target
    `D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
    warning: ignoring old commands for target
    `D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
    link.exe
    -MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
    -NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
    -OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
    D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
         D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
    /LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
    "LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
    LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
    LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
    LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
    gnumake: ***
    [D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
    Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
    2010
    Relink of module "fndcpesr.exe" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Regards,
    Neeraj

Maybe you are looking for