My Xperia Z2 is with BUG in the system, help me please.

Good Morning.
My Xperia Z2 is apparently with a BUG in the system. I customize the entire desktop by creating folders and reducing screens work, so my interface is more organized because I have many applications. The problem is that when I do any customization of the folders and everything I do on the screen when I put it to load immediately starts a video demo of the device and when I return to the desktop all I've done is lost and comes back as factory .
Please help because I am that with unit 3 days and I'm already frustrated. I did the last update (17.1.2.a.0.314).

yeah i know i told you to reapir your phone using PC Companion ok not a hardware..this is a software repair..
Do not forget to give kudosand to select the correct answer

Similar Messages

My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software.

My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done? Why did this happen, the overloading of the Time Machine?

Why has the TimeMachine drive run out of space?
With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
Will you have this problem with a 3TB drive?
I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
Moving Forward
Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else.

Flash CS 6 error: CreateWinProcess failed with error 2 - The system cannot find the file specified

Hi,
I'm getting the error "CreateWinProcess failed with error 2 - The system cannot find the file specified" whenever I try to test an Air app within the Flash IDE.
This error even comes up with a new and empty project .fla file. I already updated the Air runtime and Flash to the latest version.
How to fix this problem? Any ideas welcome!
Thank you.

I installed the update, but I'm sorry to say that it did not solve the problem
The error is still there as described by Master §ix and Daniel777
CreateWinProcess failed with error 2. The system cannot find the file specified.
It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
In this case, I can't use the simulator to test the applications,
thanks

Wrapper.createfile failed with error 3: The system can't find this path

Hi,
I have a problem of installing Java on my computer. I saw the error which is "wrapper.createfile failed with error 3: The system can't find this path specified."
I searched a lot of sites to solve it, but i havent found. How do I solve it ?
Thanks...

Hi,
Error code 0x80070003 = "The system cannot find the path specified."
Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I goy my Ipad disable, is there any way to unblock it with no restore the system?

I got my Ipad2 disable, i dont know why it dont recognized the passcode I set up on it. Is there any way to unbloqued it with no restore the system?

If you don't know the passcode, you'll have to restore your iPad from the computer to which it was last synched to remove the passcode. If you don't have that computer, you'll have to restore the iPad as new, and you will lose all your data.

Right now, I'm stuck in the settings, when I press the sleep/wake button or the home button it doesnt let me. But is not frozen or any thing just the buttons. help me please!!!!!

Right now, I'm stuck in the settings, when I press the sleep/wake button or the home button it doesnt let me. But is not frozen or any thing just the buttons. help me please!!!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I restore my iPhone 4S on iTunes and then when restarted it is asking for valid SIM card and I don't have SIM card for that, I was just using the iPhone with wifi, any one can help? Please.

I restore my iPhone 4S on iTunes after the restore was completed the iPhone was restarted and now asking for valid SIM card which I didn't,t have and I was using the iPhone with wifi, and now can't use it because the screen is locked for SIM card. Can anyone help me please.
Thanks,
David

wjosten wrote:
Phil0124 wrote:
I doubt the phone is locked to GCI in any way
Well, you're wrong, & in fact not only is it locked, GCI does not offer unlocking for iPhones.
Fact is your post won't help the OP.
And you are 100% sure its locked to them? How can you know this? While GCI does not offer unlocking that does not mean the phone is actually locked to it. Get off your high horse.
Its possible the original owner had an unlocked phone. he was using with GCI. Or that GCI doesn't actually have locked phones. Seeing as they don't even have their own infrastructure but instead use AT&T's I doubt they'd have iPhones specifically locked to them and that would be the reason they do not offer unlocking (because there's nothing for them to unlock). And just to clarify, I'm not saying for a fact its not locked to them. It very well maybe be, but without knowing more about the phone and going by the fact GCI uses AT&T infrastrucure its possible its not locked. But here's no way to say for sure either way.
Trying a Sim card from AT&T or another carrier might just help the OP if its actually unlocked or locked to AT&T rather than GCI.

_Media creation failed with error message: 'The system cannot find the path specified.'

SCCM 2012 R2 CU2 all latest patches.
I attempted to create a task sequence media and I get the error in the screenshot below. I have deleted and recreated the operating system,boot image, driver pack and task sequence. The usb media is 16GB and the task sequence size is 3004MB.
I only see the error in CreateTSMedia.log as below. How do you fix this?
<![LOG[Beginning media generation]LOG]!><time="12:37:44.522+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:418">
<![LOG[Partition activated]LOG]!><time="12:37:47.720+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="diskvolume.cpp:849">
<![LOG[Finished formatting volume F:\]LOG]!><time="12:37:55.723+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:772">
<![LOG[Assigning staging directory to F:\]LOG]!><time="12:37:55.724+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:1122">
<![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:476">
<![LOG[ Beginning pass to compute volume layout]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:479">
<![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:487">
<![LOG[Setting up new volume]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1297">
<![LOG[WriteVolumeId()]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1038">
<![LOG[Failed to create media (0x80070003)]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="3" thread="4668" file="createtsmedia.cpp:345">
<![LOG[CreateTsMedia failed with error 0x80070003, details='']LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="createtsmedia.cpp:355">
<![LOG[MediaGenerator::~MediaGenerator()]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:396">
<![LOG[Media creation process that was started from Admin Console completed.
]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4772" file="createmedia.cpp:1065">
<![LOG[CreateMedia.exe finished with error code 80070003]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="2" thread="4772" file="createmedia.cpp:1123">

Hi,
Error code 0x80070003 = "The system cannot find the path specified."
Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Rescue and Recovery with T40 booting the system (XP) without restoring factory configuration

(plus bas en français)
Hi,
I've a T40 which I want to restore the factory configuration.
I've installed the up-to-date version of Rescue and Recovery but :
- when launching Rescue & Recovery from XP, it does not offer to restore the factory configuration
- at least, this is feasible when I press the "Access IBM" blue button when starting the computer...
- ... even if factory configuration restore is available there, it does not work. Indeed, it asks me to confirm and then starts the computer again without restoring anything.
Can someone help me please ?
Bonjour,
J'ai un T40 pour lequel je souhaite restaurer la configuration usine.
J'ai installé la toute dernière version de Rescue and Recovery mais :
- quand je lance Rescue & Recovery depuis XP, je n'ai pas la possibilité de restaurer la configuration usine.
- à la rigueur, c'est pas grave car quand j'appuie sur le bouton bleu "Access IBM" lors du démarrage du pc, Rescue & Recovery me propose de restaurer la configuration d'usine... mais ne fonctionne pas. En effet, après avoir confirmé l'opération, le système redémarre et lance XP sans avoir restaurer quoi que ce soit.
Quelqu'un peut m'aider svp ?

hey sylvain,
for the Rescue and Recovery to work, did you make a backup of the system via recovery media ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Total lock-ups with fan running - translate system.log file please!?

Hi, all. My late 2005 2.3 gig dual G5 has been experiencing random lock ups for as long as I can remember. My system is up to date and I have tested each pair of the 5 gigs of ram that I have and the system freezes with each pair. It can happen at any time, when I am doing absolutely nothing, for example, overnight. I am at my wits end!
Here's the system log file for the latest freezes. Can anyone tell me what's going on here??? I really need to get to the root of this problem. Thanks so so much in advance.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/Macintosh HD failed 89.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Macintosh HD, flags 524288, pid 62
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This service performs licensing functions on behalf of FLEXnet enabled products.\n
Apr 12 18:01:06 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:01:49 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:08:29 Marc-Weinbergs-Computer diskarbitrationd[69]: SDCopy [1056]:36091 not responding.
Apr 12 18:16:18 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:16:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 19:24:12 Marc-Weinbergs-Computer ntpd[191]: time reset -0.650307 s
Apr 13 01:05:45 Marc-Weinbergs-Computer ntpd[191]: time reset -0.496917 s
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 07:15:03 Marc-Weinbergs-Computer postfix/postqueue[1778]: warning: Mail system is down -- accessing queue directly
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 15:53:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 15:53:54 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 22:15:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 13 22:15:47 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[63]: starting
Apr 13 22:15:48 localhost kernel[0]: vmpagebootstrap: 506550 free pages
Apr 13 22:15:47 localhost memberd[70]: memberd starting up
Apr 13 22:15:49 localhost kernel[0]: migtable_maxdispl = 70
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.FTATASil3132E" from archive.
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.Sil3112DeviceNub" from archive.
Apr 13 22:15:49 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 13 22:15:49 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 13 22:15:49 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Apr 13 22:15:49 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Apr 13 22:15:49 localhost kernel[0]: DART enabled
Apr 13 22:15:47 localhost DirectoryService[75]: Launched version 2.1 (v353.6)
Apr 13 22:15:49 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe1b4c7e; max speed s800.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:48 localhost lookupd[71]: lookupd (version 369.5) starting - Sun Apr 13 22:15:48 2008
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: Extension "com.microsoft.driver.MicrosoftKeyboardUSB" has no kernel dependency.
Apr 13 22:15:49 localhost kernel[0]: AppleSMUparent::clientNotifyData nobody registed for 0x40
Apr 13 22:15:49 localhost kernel[0]: Security auditing service present
Apr 13 22:15:49 localhost kernel[0]: BSM auditing present
Apr 13 22:15:49 localhost kernel[0]: disabled
Apr 13 22:15:49 localhost kernel[0]: rooting via boot-uuid from /chosen: 82827EDF-0263-3B93-BEED-4B114E820B85
Apr 13 22:15:49 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 13 22:15:49 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOApplePartitionScheme/AppleHFS_Untitled1@10
Apr 13 22:15:49 localhost kernel[0]: BSD root: disk0s10, major 14, minor 12
Apr 13 22:15:49 localhost kernel[0]: jnl: replay_journal: from: 8451584 to: 11420160 (joffset 0x952000)
Apr 13 22:15:50 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Apr 13 22:15:50 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x67, SDB vers = 0x01,
Apr 13 22:15:50 localhost kernel[0]: HFS: Removed 8 orphaned unlinked files
Apr 13 22:15:50 localhost kernel[0]: Jettisoning kernel linker.
Apr 13 22:15:50 localhost kernel[0]: Resetting IOCatalogue.
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 3
Apr 13 22:15:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Apr 13 22:15:50 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:78
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:79
Apr 13 22:15:51 localhost lookupd[86]: lookupd (version 369.5) starting - Sun Apr 13 22:15:51 2008
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 21611008 to: 7857152 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 673280 to: 24382976 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 3890176 to: 6294016 (joffset 0x7d01000)
Apr 13 22:15:51 localhost diskarbitrationd[69]: disk0s10 hfs 82827EDF-0263-3B93-BEED-4B114E820B85 NewestSeagate /
Apr 13 22:15:52 localhost kernel[0]: NVDA,Display-A: vram [90020000:10000000]
Apr 13 22:15:52 localhost mDNSResponder: Adding browse domain local.
Apr 13 22:15:53 localhost kernel[0]: hfs mount: enabling extended security on Maxtor
Apr 13 22:15:53 localhost diskarbitrationd[69]: disk1s3 hfs 0DBE2113-B1F5-388F-BF70-2E366A095330 Maxtor /Volumes/Maxtor
Apr 13 22:15:54 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
Apr 13 22:15:54 Marc-Weinbergs-Computer configd[67]: setting hostname to "Marc-Weinbergs-Computer.local"
Apr 13 22:15:54 Marc-Weinbergs-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 13 22:15:56 Marc-Weinbergs-Computer diskarbitrationd[69]: disk2s3 hfs 971CABB3-C211-38FC-8E91-6B4F8EA5FA20 B08-09-07 /Volumes/B08-09-07
Apr 13 22:15:56 Marc-Weinbergs-Computer loginwindow[110]: Login Window Started Security Agent
Apr 13 22:15:57 Marc-Weinbergs-Computer kernel[0]: AppleBCM5701Ethernet - en1 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Apr 13 22:15:57 Marc-Weinbergs-Computer configd[67]: AppleTalk startup
Apr 13 22:15:57 Marc-Weinbergs-Computer TabletDriver[119]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:15:59 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:01 Marc-Weinbergs-Computer lookupd[123]: lookupd (version 369.5) starting - Sun Apr 13 22:16:01 2008
Apr 13 22:16:01 Marc-Weinbergs-Computer kernel[0]: HFS: Removed 2 orphaned unlinked files
Apr 13 22:16:01 Marc-Weinbergs-Computer diskarbitrationd[69]: disk3s3 hfs CDA8BCC5-0CE4-33E8-A910-4B0952DBC230 FullBU-09-07 /Volumes/FullBU-09-07
Apr 13 22:16:04 Marc-Weinbergs-Computer configd[67]: target=enable-network: disabled
Apr 13 22:16:05 Marc-Weinbergs-Computer configd[67]: AppleTalk startup complete
Apr 13 22:16:09 Marc-Weinbergs-Computer TabletDriver[237]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: exited with exit code: 253
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: 9 more failures without living at least 60 seconds will cause job removal
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0L6LR', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0L6LR', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0LGS4', reports it is functioning at a temperature of 100.4F (38C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0LGS4', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '9RV000FC', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '9RV000FC', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', reports it is functioning at a temperature of 89.6F (32C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', appear to still be available. (Total Available: 63) (Use Attempts: 0)
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
etc.

Hi-
The machine seems to be having trouble with loading certain drivers, but, as this isn't a crash log, and doesn't show the "hang-up" or freeze, it's hard to tell.
Noted possibilities are:
-Microsoft keyboard (possible USB power problem)
-firmtek driver (from archive) questionable due to the "archive" annotation
-Wacom tablet driver, causing system problems
Running in Safe mode without freezes would help to determine if one of these drivers is the problem.
Other possibilities are outdated drivers, or simply a need to reinstall the OS.
If unnecessary, removing the driver(s) would be a good idea.
External USB and Firewire devices are all suspect, should all be disconnected, revert to Apple keyboard, and test system performance. Adding one device at a time, and testing each will be necessary to clear each device.
I have experienced system trouble when a Wacom tablet was not connected, but the driver was left installed.
Disabling the driver from Startup items may be necessary to test without the Wacom tablet connected.

HT1338 can't get my camera to work with Skype can any one help me please

cant get my camra to work with skype can any one help me please

You posted in the OS X 10.3 forum instead of the Mac Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
What OS X version are you using?
 Cheers, Tom

I need help badly with my dream phone. Help me please.

I just bought my iPhone 4 today. As I charged it tonight it shut down. I tried to turn it on again (with the charger connected), it says "Connect to iTunes" with a picture of a USB cable and an arrow pointing to the iTunes logo. So itried to remove the charger and the phone went off again and it doesnt want to turn on without the charger connected. Please help me. Ive been dreanibg of this kind of phone since apple released its iphone 3g. and now that I have my own, this is what happened. Please help me. I'm begging all of u.

Yes. I have read everything. Like I said sir, it does not want to turn on, it only turns on when the charger is connected. When I'm connecting it to my computer it only turns on for like 5 seconds then shuts down. so I won't be able to do any of those things that I missed if I don't get the phone to turn on. That's my biggest problem.

Too large java heap error while starting the domain.Help me please..

I am using weblogic 10.2,after creating the domain, while starting the domain,I am getting this error.Can anyone help me.Please treat this as urgent request..
<Oct 10, 2009 4:09:24 PM> <Info> <NodeManager> <Server output log file is "/nfs/appl/XXXXX/weblogic/XXXXX_admin/servers/XXXXX_admin_server/logs/XXXXX_admin_server.out">
[ERROR] Too large java heap setting.
Try to reduce the Java heap size using -Xmx:<size> (e.g. "-Xmx128m").
You can also try to free low memory by disabling
compressed references, -XXcompressedRefs=false.
Could not create the Java virtual machine.
<Oct 10, 2009 4:09:25 PM> <Debug> <NodeManager> <Waiting for the process to die: 29643>
<Oct 10, 2009 4:09:25 PM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<Oct 10, 2009 4:09:25 PM> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>

Thanks Kevin.
Let me try that.
Already more than 8 domains were successfully created and running fine.Now the newly created domain have this problem.I need 1GB for my domain.Is there any way to do this?

After the latest update to Photoshop 2014, something went wrong and started spray-like black oil on canvas. I have deadline with cover. Can you help me please?

How do I undo whatever went wrong after installing the latest update to Photoshop 2014 and suddenly when I tried to paint or touch up my illustration (book cover I'd drawn and painted, then scanned in and continued painting, changing. It's mostly done but I needed to send it like yesterday!!) OR touch up a photograph, black-like oily smudge-like substance sprayed around the point of the brush. I tried to fix by resetting but really didn't know what to do and probably made it worse. However, the problem happened after I updated the Photoshop Creative Cloud 2014 on my desktop 8.1 Windows and after a Tech helped update the regular CC Photoshop on my laptop 2007, 64 bit Windows to 2014. He promised to call back after giving it time to install but didn't for whatever reason on Friday. That happened to go up to the same update I did on my Windows 8.1 Windows. I have this deadline and really stressed. COULD IT BE THE UPDATE OR BOTH. REGARDLESS, CAN SOME EXPERT HELP ME UNDO WHATEVER THE UPDATE AND/OR I DID? I'm a God-gifted artist but only started using Photoshop CC, then updated to 2014--which, again, I like even better--when I began my monthly membership January or February 2014, although I had paid version 2002 and updated to paid version 2004 (ownership, not paid subscription like now). I've learned so much, including transforming, moving, stretching, with layers--all in the painting area with my illustrations--a little touch ups with photography. MY EMAIL IS: [email protected] I really appreciate any help. This needs to be resolved today, the latest tomorrow--I could call tomorrow, however. I was chatting with a Tech support but lost him about an hour or less back. I have the case number and name and gave him my contact number, but they won't be in until tomorrow. He's supposed to give info and escalate the case. I really need an answer--if possible, today. It may require going back to before installing the latest update. THANK YOU KINDLY. Glena Jessee-King

Update your graphics driver and/or turn off GPU acceleration in the Performance prefs.
Mylenium

HT4137 I recently bought an ipad off someone with her apps. i want to add apps from my account with out lossing the apps she has. please help

i recently bought a used ipad with apps from someone. I want to down load my apps on to it with out lossing her apps. how can this be done?

You can download whatever you want by signing into your own account, but what ever was previously installed with the other account will be forever associated with that account. This will work until the apps that aren't yours need updating and the only way to update them will be to sign in with other I'd.

My Xperia Z2 is with BUG in the system, help me please.

Similar Messages

Maybe you are looking for