My Xperia Z3 Dual only has a constant red led when plugged in, cant turn it On

Hi,
When I woke up in the morning today, I noticed that my Xperia Z3 Dual only shows the led in red (constant, not blinking) when I plug in to charge. I cant power on pressing the Power button, cant even restart using Power + Volume buttons. I also tried the recovery procedure from PC Companion, power off then Volume and power on, connect to PC and autodetect... nothing works.
I have the phone since march 2015, only 3 months; all was perfect before this big issue: no software problems, battery duration was excellent (at least 1 full day), camera ok, both sim's detected and configured without issues, also no problems when wet my phonet.
Can you help me pls?

@JesusAlarcon
That could be a hardware issue, contact your local Xperia Care ASAP
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Curve 8520 Constant red LED indicator

Hi,
I recently turned on my phone to find out it has a constant red LED indicator,
it does not flash nor effect the phone it's just pretty annoying.
I have the latest OS installed on the phone.
If someone could find a solution i would be very greatful.
Thanks

Hi Paid4Upload and welcome to the BlackBerry Support Community Forums!
Have you recently installed any LED type applications or themes? I would also assume that the LED is red?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi Claire, sounds dire, but some things to try...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

TS1398 my iphone 4s has stopped access to wi-fi and I cant turn the wifi from off to on. how can i reset this? i already tried the reset setting

my iphone 4s has stopped access to wi-fi and I cant turn the wifi from off to on. how can i reset this? i already tried the reset setting

iOS: Wi-Fi settings grayed out or dim

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on-

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on…

http://www.verizonwireless.com/support/knowledge-base-26502/
Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment

Itunes has stopped recoginising my ipod when plugged in

Itunes has stopped recognising my ipod when connected .
The ipod logo on the left of the screen no longer appears.
Up to this point it had all worked fine and I have not altered any settings .
This suddenly happened when I was in the middle of buying music from the itunes store.
Itunes recognises all other devices when connected and all cables are working fine.
My laptop recognises my ipod when connected and in all other respects the ipod works fine .

Hello docker474,
The article linked below provides some useful troubleshooting steps that can help get your iPod to reappear in iTunes.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Cheers,
Allen

HT3964 My MacBook Pro i5 Dual Core has a hardtime waking up when the computer is put to sleep and only when it goes to sleep and has been asleep for a while. The indicator light flashes on and off for a while and then freezes. I've done an SMC reset once.

Does any one have the same problem with their MacBook Pro i5 Intel Dual Core? If the computer goes to sleep (not the screen) and is asleep for a while, when I try to wake it up it doesn't respond. I have to power it downn and restart it and sometimes it takes two or three attempts. Otherwise it works fine. I upgraded the memory to 8 GB. That is the only alteration doen to it. I've performed one SMC restart and now it wakes up but it takes a while and a gray screen shows up. When I insert a DVD it won't start automatically I have to start the application in order to see it. Any suggestions?

http://www.apple.com/support/macbookpro-videoissues/

Xperia Z2 orange blinking led when connected to magnetic charge cord

Hey guys. I bought this phone off a friend. Its three months old and works great. But the other night I accidentally put the magnetic port on backwards and the phone completely died. I freaked out and tried every key combination possible. I eventually got a red led when I plugged in the microusb port. It turned on in about 10 minutes like normal.
Now, when ever I attach the magnetic cord (properly) I get an orange led blinking and the device doesn't charge at all.
What does the blinking orange led mean? Does warranty cover the magnetic port? Hopefully someone can help me
Solved!
Go to Solution.

Hello everyone. I've was having issues with the magnetic charge port on my Z2. It simply did not want to charge the device. It also was heating up when it was charging through USB. Sometimes it wouldn't even charge!
I was trying to get away with living with it until one day the phone turned off and never started back up for about a day.
At this point I knew there was no other choice but to request an RMA to get these issues addressed.
When I phoned in to tell them my issues, I told them specifically "THERE IS AN ISSUE WITH THE MAGNETIC PORT", "THE PHONE REFUSES TO CHARGE SOMETIMES" and "THE PHONE HEATS UP WHEN CHARGING".
The rep on the other end told me several times he understands the problem and they will all be addressed when it arrives at the repair facility.
So, I packaged the phone up and sent it off to Ontario (shipping cost me $40) and thought that once it comes back it'll work like it should.
This is where I have never been more wrong.
I got the phone back today and opened it up as soon as I could.
First thing I did was try to turn it on. Absolutely nothing. No light, no low battery screen, nothing.
So when I arrived home I plugged the thing into an AC USB charger. The first 10 minutes there was only a red LED and nothing else.
After 10 minutes I was able to see the green battery on the screen.
Another 5 minutes later, I was actually able to power up the phone. It was sitting at 2%.
Which makes me believe that the phone was either left on or COMPLETELY discharged before shipping. Don't these people at the repair facilities know how damaging it is for a battery to be comepletely discharged???
The second and most outrageous thing is the main reason the phone was sent it, wasn't even fixed!!!
I tried plugging into the magnetic port charger (with an aftermarket cord, as well as the dock) and the phone is doing EXACTLY the same thing!!!
In fact, this is an exact quote of what the work order says:
"PHONE IS CHARGING AND IS WORKING GOOD. PLEASE SEND IN USB CABLE AND CHARGER IF PROBLEM P-" <- They didn't even finish the sentence.
"Software Upgrade, Live Call Passed, Quality Control Passed"
I am so totally outraged and disgusted with Sony right now.

Many Xperia M2 Dual has Manufacturing defect in SIM 1 slot with WCDMA only mode.

Hello, I have problem with Sony Xperia M2 Dual mobile handset. Whenever I switch to WCDMA only mode it shows no network and this issue occurs in SONY phones only. Same sim cards work properly in other handset and even I have changed the SIM card also. But still getting same issue and Sony engineers at service centre are claiming that it's network issue. How is it possible ????????????????? Please find the attached screenshot. This issue occurs only on SIM1 slot. SIM2 Slot is working fine at any network selection mode (i.e. WCDMA only, WCDMA Preferred / GSM & GSM only). The exact steps to reproduce the issue are as below.1. Put SIM card in SIM Slot 1 in WCDMA mode only.2. Put the SIM card in SIM slot 2 in GSM only (In this handset, At a time, You can put only one SIM card in WCDMA mode only.)3. Make a call from SIM2 & continue the call upto 15-20 mins.4. THEN DISCONNECT THE CALL5. and immediately (within 1-2 mins.) try to make the call from SIM1.6. It will loose the network signal in SIM1 slot7. It will never get a signal in SIM1 slot until you restart the phone or put the phone Airplane mode on and then off. I have tested this issue in 3 brand new handsets. Anyone please guide me how to report this issue to technical team at Sony. Thanks,Amit Keskar

I have reported this issue to service centre. however service centre guys are claiming that this is network issue.
I have tried these same Sim cards in my Samsung and friend's Micromax mobile. The Sim cards works properly without any issue.
This clearly shows that there is an issue with Sony Xperia M2 dual.
can anybody in this forum tell me what should I do if service centre guyz are not getting my point or they are not understanding the situation ????
I have sent several emails to Sony's support centre. I didn't get a single reply from them.
Thanks,
Amit Keskar

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

Can I put a dual processor in my power mac g5 which only has one processor right now

Can I put a g5 dual processor into my power mac g5? I have a power mac G5 but it only has one processor so I wanted to upgrade to the G5 dual processor found in the later version power macs. Would I be able to do this? If i could do this would i need another fan or other parts? I was also thinking of putting more ram in and another hard drive. PLEASE HELP

Exactly what to do with ram and video is hard to say without the model details. You can go to http://www.everymac.com and click on Power Mac G5 and then find the machine you have. The detailed info on the machine will show how much and what type of ram you can put in (I always use ram from either OWC, http://www.macsales.com or Crucial, http://www.crucial.com) and also gives the installed video card info. OWC would also be a good source to see what video cards are available that will work with that logic board.

Xperia Z3 Dual battery drain..running 4.4.4

Greeting guys
I recently switched to andriod with the new xperia z3 dual, the battery drains very fast. its abnormal, please look at the usage , your help guys is very much appreciated. i still didnt start using it heavly , instagram and whatsapp are being used occaisionally only.

Given the power usage on the screens you get 9.5 hours on 14% of battery.
Assuming that battery is discharging lineary you should get about 68 hours of usage.
68 hours is 2.8 days so it's more than Sony claimed in its advertising.
Standby (deep sleep) at about 70% of time is pretty normal. It looks really good.
Z3 has a very big screen. As soon as it is on battery levels are going down pretty fast. You can increase a bit your uptime by reducing brightness (you can adjust it to lower levels even with auto ON).
Also enable Stamina mode. If you need some apps to be running all the time like email or your favorite messenger add it to exceptions by touching stamina mode menu and then adding apps.
You can also enable location based wifi. Phone will automatically enable and disable wifi when you reach places with already used networks.
Best regards,
Sergio PL
Xperia Z1 / Nexus 7 (2012)

Will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are in use

will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are being used .
If splitter will work any recomendations as to best type to use

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

Xperia M Dual GPS problem

My Xperia M Dual (C2004) drops GPS frequently when outdoors; Other phones (with same network Sim Card) shows good GPS connection. I have tried different mobile network sim cards, M Dual continues to drop and search of GPS. Have tried different location with clear sky view.
Xperia M Dual has latest Sony software installed and I have tried a reset as well. I travel frequently & require the GPS to work
Any suggestions?

Hi aapdesai,
Greetings! At your convenience, please reach out to our colleagues at Sony Mobile for further assistance with your question. You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/. Thanks for your message today!

Xperia Z3 Dual - Battery Issue

Dears,
Kindly be informed that, after purchasing the new Smart Phone Xperia Z3 Dual in KSA, facing issue with Battery ! its not working for 2 days (Maximum 1 Day) - even after activating STAMINA feature with Extended Standby still same issue.
Also i have noticed that, battery drain even without doing any activities (Data "LTE/3G") or bluetooth, etc.....). !!
Is there any thing need to do from my side ? Kindly have a look to the attached snapshots.

i think yes if you using ultra stamina mode it will be.i have only xperia z2 but if i active stamina mode there we can see the popup massege with the forking fuction.but i can use wifi bluetooth also so try it ok after active ultra stamina mode try to on wifi bluetooth and try to use internet
Do not forget to give kudosand to select the correct answer

My Xperia Z3 Dual only has a constant red led when plugged in, cant turn it On

Similar Messages

Maybe you are looking for