My yellow ink just stopped after 20 pages. cleaning printhead didn't help per hp instructions.

I have a photosmart plus b210e series. My yellow ink started streaking, and then gave out completely within about 2 pages of printing photos. The diagnostic report confirms that yellow doesn't show up. but the printer seems to think everything is fine. I tried cleaning the printhead and making sure ink was coming out of the yellow cartridge, but that didn't work, either. I've only printed about 20 pages when this happened.

Hey sara123abc, 
Teh symptoms you're describing sound like a hardware failure in the printer's ink system.  There are a few more steps you can try.
1. Remove teh power cord from the printer and allow it to sit for about a minute, then plug the power cord back in.
2. Try replacing the ink cartridge, it is possible that the cartridge is not delivering ink correctly to the printhead. 
If neither of these steps are successful in restoring your ink usage, you problably need to to contact HP printer support at 1-800-HPINVENT to receive more advanced troubleshooting.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

  • Recorded FLV just stops after a random time

    Hello:
    I have some long (1 hour or so) flvs recorded from a small
    flex app communicating with FMS 3.0.0. It is mostly audio.
    When replaying them from
    - a client Flash OR from (Method A)
    - FMS and then have a Flash client connect to the FMS Live
    stream (Method B)
    The stream just stops after a while (variable: could be after
    2 minutes or 20 minutes). It is very reproduceable which makes me
    wonder how come others are not getting this as a google search does
    not show other complaining.
    I get an Unpublished and then Stop status on the Flash Player
    for the stream.
    Strange thing: If I play the stream direct from a player
    (Method A above), then the higher the BufferTime and the longer it
    takes to stop. With a buffer time of 5 seconds, it plays without
    stopping.
    I actually need to run it with Method B. Setting all kind of
    buffers on the server produces no noticeable results.
    Any idea?
    I can send you my simple test codes for Flash player, FMS and
    the flv if need be.
    Thank you

    quote:
    Originally posted by:
    peterflex
    The stream just stops after a while (variable: could be after
    2 minutes or 20 minutes). It is very reproduceable which makes me
    wonder how come others are not getting this as a google search does
    not show other complaining.
    I get an Unpublished and then Stop status on the Flash Player
    for the stream.
    Were you ever able to solve your problem? I have the same
    issue. Thanks,

  • Okay, let's say you bought an album and there are a few songs on there where you only have half the song(the song just stops after a number of minutes/seconds). What do you do, and can you re-download these songs?

    Okay, let's say you bought an album and there are a few songs on there where you only have half the song(the song just stops after a number of minutes/seconds). What do you do, and can you re-download these songs?

    How to report an issue with Your iTunes Store purchase

  • I have deleted so many pictures, and I only have about 6 apps but i still don't have storage. Whenever i try to take picture it won't let me because there is no room. I just bought more iCloud storage but it didn't help. Any suggestions?

    I need advice on getting more storage for my iPhone 6. I have just bought more iCloud storage, but it didn't help. I only have about 100 picture and 6 apps. I also recently purchased music and it won't let me download it to my phone because there is no storage. Any suggestions on getting more storage for my iPhone?

    iCloud storage has nothing to do with the memory available on your iPhone.
    Have you tried a reset?
    Also, see this article:
    If you get a "Not enough free space" alert on your iPhone ...

  • HP 2550 Color Laser Jet stops after first page

    I've uninstalled the old drivers and reinstalled new ones for Snow Leopard, but my 2550 crashes after printing page 1 of a document from any of several programs. The red alert light comes on, as if there were a paper jam (there isn't). I have to open and close the front door and wait while it goes through its startup routine. Then it may print page 2 only to crash again, or it may simply crash without printing anything. Is anybody else experiencing anything like this with HP printers?
    I have to say, I totally regret installing Snow Leopard. My Adobe CS3 programs crash regularly (Premiere is almost unusable). QuickTime Player X and Player 7 (you have to have two now) no longer recognize the TOD files from my JVC camcorder. The best available fix for that is iVerio for Leopard ($75), which is quite unstable on Snow Leopard. I recognize that Adobe is being greedy, JVC is being stupid and HP is living in some Windows-centric dreamworld, but this is ridiculous. I love Apple, but they can't just point fingers at everybody else this time. In my experience, Snow Leopard is a disaster.

    Thanks, Barry. Sorry for the rant, but this has been a highly frustrating upgrade -- a first with Apple for me. Part of my frustration is that I have already uninstalled and reinstalled the drivers in several times, in several different ways, but the problem persists. I'm not trying to be argumentative or accusatory about this, and your larger point is well taken. But several of the most important things I use my computer for have been disabled by this upgrade, and I had no idea that was coming. The only issue I'm looking for help with right now is printing. My printer is supposed to be supported, but I can't make it work in several days of trying. I'm just looking for a workaround. (Rant alert: Why does HP make fifty or more different printers that all do basically same thing but require unique drivers?) I guess maybe I have to repost my question under an assumed name when I calm down. But thanks for responding, Barry.

  • CSS11501 VIP just stops after a day or two

    We have a CSS11501 that we are using to frontend an oracle colaberation suite cluster of unix servers. There are two servers in the first cluster. I have set it up to have a single load balanced vip with the following content services (http, imap, smtp, port 7777, and port 9401). Two other servers have a different load balanced VIP for their http and LDAP funtions. We are trunking in from a Cat3500XL switch the two vlans (10 "public" and 250 "private server") via the gig interface. It works fine for about a day or two then the VIP just stops responding to any traffic. We have done dumps on the servers and they are not getting any traffic through at all. Each server has a seperate VIP & source group set up as a straight pass through for maint access, these continue to work fine. I have tried stopping and starting the services, content rule, and source groups. even totally deleting the VIP and recreating it does not work. Rebooting the switch was of no help as well. If I recreate all of the content rules on a new VIP and assign the services it comes up fine but the old VIP address just stays dead. It is almost like the VIP has a limited lifespan and then shuts down. Any suggestions would be helpfull as this is a new technolagy for me. Thanks.
    Burke McCrory
    Internet Administrator
    Oklahoma Tax Commission

    you will have to capture a sniff in front of the css to see if it is receiving traffic for the vip.
    You can also do a 'sho summary' and see if the hit counter is increasing.
    Then check the upstream device and verify the mac address associated with the vip.
    Make sure the L2 cam table is pointing to the CSS.
    Do you have redundancy turned on ?
    Finally, not sure what is the colaboration suite exactly, but if this is a software loadbalancing tool, you may want to stop using it if you have a CSS. Simply configure the server independent from each other.
    In the past we have seen many issues when trying to combine both software and hardware loadbalancing.
    Gilles.

  • Internet just stops after 10-15 minutes browsing

    We have had this laptop about a year, mainly for work, but the internet browsing is a bit of a pain.  After browsing for about 10-15 minutes it takes an age to load pages and then just can't.  No matter how long you wait for it to catch up.  shutting down and turning on works, restarts don't.  Can't seem to get any help from the support line.
    We are using Mozilla Firefox, but it also happens on Internet Explorer.

    What is the COMPLETE Model Number?
    Are you connecting to the internet via the Modem, WiFi, or LAN?
    What OS are you using and at what Service Pack Level?
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • TS3276 Mail import just stops after about 180 - 250 Mails! What's wrong?

    I just bought a new Macbook and used Migration Assistant to get all my files from my old to my new one.
    Now, when I open Mail it tells me that it needs to import my e-mails (which is good, I want it to do that).
    I know that all my mails are on my computer, I can see the files in the library.
    BUT: The import starts, goes on for a couple of seconds until about 200 Mails (out of 12000) are important and then the number just doesn't go up anymore. Only the remaining time keeps going up and up. What is wrong? What can I do?
    Thanks

    Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
    Sadly, the following issue is NOT fixed for me. Is it with new projects only?  I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
    On the list above...
    Switching between sequences can turn the render bar red.
    This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
    1) Create two sequences with multiple short clips (the more clips the better)
    2) Make sure GPU acceleration is enabled.
    3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
    4) Hit SAVE.
    5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
    6) Toggle back to the original sequence and the delay occurs again.
    7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
    Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
    Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
    Sigh.

  • ITunes doesn't play the next song, it just stops after one track.

    I have iTunes 11.0.1. When I play a song in my playlist, I expect the next song to start as the first one ends, but iTunes stops and doesn't play the next song. I'm missing some sort of setting but what?
    It's not a smart playlist, just a playlist of favorite music I've built up over the years.
    Mountain Lion.

    Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - Command-click will select or unselect them all - and you should then have continuous playback.
    Hope this helps.

  • Importing Video just stops after 1-2 minutes

    Am using Director's Cut Take 2 to import Video from a VCR. On my old iMac this worked perfectly with iMovie 6. Now have a MacBookPro.
    1st problem - the Firewire drive is not powerful enough to drive the Director's Cut! Now need an external Power Supply! Bad design flaw Apple.
    Main problem - Video imports fine but after a time (could be anywhere from 30 seconds to 4 minutes but usually about 2 and a half minutes) the video simply stops importing even though the tape is still running. Sometimes it will start up again of it's own accord but more often than not - that's it - it's stopped.
    Anyone know why the import simply stops?
    The stuff that has imported looks fine!

    Hi
    *Not knowing the origin to Your problem - General approach when in trouble is as follows:*
    • Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
    • Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
    • Garageband-fix. Start it and Close it. Re-try
    • Delete iMovie pref file - or rather start a new user/account - log into this and re-try
    • Third party plug-ins that doesn't work OK (not relevant for iMovie’08)
    • Program miss-match: iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
    • Program miss-match: iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • Program miss-match: iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • Screen must be set to Million-colors
    iMovie pref file resides:
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named: com.apple.iMovie.plist
    While iMovie is NOT RUNNING - move this file out to desk-top.
    Now restart iMovie.
    From LKN 1935: (in this case = iMovie HD (5), I tried it all, but nothing worked.
    Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
    there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
    iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
    to my Sony camcorders worked properly as it did before.
    Yours Bengt W

  • Our downloaded movie just stopped after 15 minutes.  What can we do to restart it?

    One basic thing we don't know is where is the downloaded movie?  On the Apple TV, on the MacPro we use or just streaming from the internet?

    Welcome to the Apple Community.
    If you rented/purchased it from the Apple TV, it will be on the internet and available from the movies feature (under purchased or rentals depending on it's type)
    If you purchased it from the Apple TV it may or may not be on your Mac depending on it's settings, if it isn't you can download it from the purchased option in the quicklinks section in iTunes.
    If it's on your Mac, you can also view it from the Apple TV from Computers > Movies, without using the internet.

  • I try to print a file through my net work 48 pages and it stops after 2 pages help

    I send a file to print wireless to the printer and it only prints a few pages then says i have an error???? can anyone help

    What model is the printer?
    What operating system does the computer use?  This will be good to know if any steps or tools need to be ran from the computer.
    Is the printer connected to the computer by a USB cable or a network connection?  If it is a network connection, is it wireless or Ethernet (wired)?  Also, what brand and model is the router?
    What is the exact error message you are getting?  Is this error on the printer or the computer?
    What program are you printing from?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Can't save suddenly. Got dreaded black x then deleted and redownloaded app and now just get a blank page.  I didn't see anything useful in a forum.  Is this a bug?

    As above....any answers? Thx

    What's make/model of tablet?
    How much storage space do you have left on your device?

  • When i try to watch a youtube video on it will not play automatically and if i press the play button it stops after about 3 secs. Can anyone help?

    It is an ios 5 ipod touch and is new. My previous ios 2 ipod worked fine on youtube so it is not the wi-fi.

    i have waited for several minutes sometimes but the white bar never moves and when i press play it still only plays for a few seconds

  • Adbove Reader stops printing after 10 pages

    We have encountered
    a problem printing a pdf document wit hover 100 pages
    . From two computers on two Ricoh network printers, the print
    job stops after 10 pages.
    This is happening consistantly.  We contaced Ricoh and performed extensive diagnostics to no avail.  Anyone have any ideas on this?

    I have a similar problem, except i'm attempting to print documents that range from 200 pates to 1,700. Things start off fine but then it will simply stop printing without any error messages. I believe the problem is a combination of Adobe X and the new print driver that was recently installed, but I can't seem to convince our IT person of that.

Maybe you are looking for