My Z10 automatically goes into bedside mode. Why?

My Z10 keeps going into bedside mode automatically and I keep missing calls and not hearing message alerts or seeing the flashing led . I found a temporary fix by restarting the phone or pulling the battery but it just happens again after several hours. This is getting very annoying! Is there anything that I can do to put an end to this? Or can I remove bedside mode completely? because I don't like it thanks

This just happened to me and more. It is definitley not BedSide mode . I know how to use it and do when in Bed .
I just happen to glance at my phone and there was an incoming call with no ring. ( My main volume and ringer volume are on high) I tried to answer and slide down the screen to answer but it would not answer. The hang up option was not there. Just he slide down to answer was now at the bottom of my screen. I tried to phone myself while this was happening and that call would not show up and on the sending phone it just rang and rang.
I ended up powering down the phone and all is good again.
Will watch for this again.
I have missed a few calls this week 2 of them I thought I should have heard, now I think it was this issue you mentioned.
Don't take life too seriously, You will never get out of it alive! ,
If I helped please Like me, If not ---------->
I have not failed. I've just found 10,000 ways that won't work. - Thomas Edison.

Similar Messages

My macbook pro automatically goes into safe mode and doesn't start. I use mavericks. what to do? ?

my macbook pro automatically goes into safe mode and doesn't start. I use mavericks. What to do??

Can you boot into your Recovery partition (hold down the command and R keys whilst booting)?
Call back - you'll be able to connect to this forum from Safari whilst in Recovery.
Clinton

Iphone 3g, os4 automatically going into recovery mode

hey when i first upgraded to os4 i had no problems
i upgraded the day it came out, and as of 20/7 at random times my phone keeps switching itself off, and i have no access to anything, nothing even comes up on the screen
the only way ive found to fix this is to plug it into the computer and then my itunes automatically says its in "recovery mode"
even after restoring- both from backup and from factory settings, it keeps doing it
there has been no patter, for example:
first time it happened after being on the charger (ac) for 5 minutes
second time i was sending a message
another time i sent a message, locked the phone and then went to unlock again in around 2 minutes and it was gone
any suggestions as to what i could do to improve it, ive been waiting to make a genius app, but i keep missing days when i can actually go in, and plus im not under warrenty anymore.
arghhh

When you restore it, don't install your backup... see how it runs factory fresh, i.e. with nothing synced or added to it.

Firefox not responding and crashes when my netbook goes into sleep mode why is that

when i shut the lid on my net book and come back nand open it , put password in and when i click the firefox icon to go back to where i was at it says firefox is not rewsponding or firefox has crashed , why is that

Try running Firefox in [[Safe Mode]]. If it works properly in that configuration, then one of your add-ons is the culprit.

Automatically goes into Stand by Mode

My computer has been killing me these days... my hard drive failed on me so i lost everything i had (had it backed up but lost most my editing software)
Now when i start up my computer
the fan starts going CRAZY and the computer automatically goes into standby mode...
if i click on my mouse a few times it turns back on and a couple seconds later it switches back to standby...
I think it may be a power supply problem?
Man... i love my computer but its really causing me problems....

rockleechoi-
It could be covered under this:
http://www.apple.com/support/powermac/powersupply/repairextension/
Luck-
-DaddyPaycheck

Why does my iphone 5 keep going into restore mode? i had to restore it because it wouldn't let me do anything else and it goes into this mode at least once a day now.

My iPhone5 went into restore mode. I restored it and now it goes into restore mode at least once a day.

Restore as new. If the issue persists, take the device to Apple for evaluation.

Why does CC start verification process every time I open it? It even starts asking for license key and sometimes goes into trial mode.

When ever I open Adobe CC it starts verification process and asks for Serial No. And then goes into trial mode. I have to open it several times for it to run in proper licensed mode.

Sign in, activation, or connection errors | CC, CS6, CS5.5
Mylenium

Mac Tower Pro 10.8.5 keeps going into sleep mode

Purchased from Apple, refurbished 2012 Mac Tower Pro. At the same time, purchased a new Dell U2713HM, 27" monitor.
Have been operating on this new system since about the first week of December 2013.
Issue:
The computer has constantly gone into sleep mode after a few minutes of no activity. I can have iTunes radio playing, but the system still goes into sleep mode. As I am typing and moving the curser, the machine stays awake.
This has caused much frustration because when it goes into auto sleep mode, it quits all programs that I am in, and when it does this, I lose all the work I had accomplished. It litterally closes everything and goes to sleep in about 2-3 minutes of no activity.
BTW: the computer and monitor have all its new OEM cables that came in the box, when I purchased the units.
Solutions attempted:
System Preferences — Energy Saver: computer sleep and display sleep set to "never" and unclicked the box "Put hard disks to sleep when possible."
Dell settings: Turned off all energy savers.
Results:
Nothing. Problem persists.

I apologize for the angst. The problem has cost too much money in lost time and material because when it would automatically shut down after a few minutes, all my work was lost.
I misunderstood the terms of the warranty. Thank you for your input and patience. Much appreciated. For the benefit of others that experience this with a new Mac that auto shuts down. Check the following:
1. Go to System Preferences.
2. Click on Security and Privacy.
3. Click on Advanced (bottom right corner)
4. If the first line is checked (Log out after 5 minutes of inactivity); uncheck it and then click OK button.
5. Be sure to click the lock before existing Security and Privacy.
Now the machine will cease shutting down programs to go into sleep mode as soon as machine is inactive for a few minutes.

Early 2008 iMac (8,1) randomly goes into sleep mode

Hey,
My early 2008 iMac (8,1) on 10.8.2 goes into sleep mode by itself. I've played around in Energy Saver, tried resetting SMC, NVRAM, replaced HDD, reformatted HDD, installed smcFanControl, reinstalled Snow Leopard, Lion, Mountain Lion. None of that worked. Took it to the Genius bar, performed some diagnostics tests and they said everything worked properly. Does anybody have the same problem? I can still use the computer for general computer use (light web surfing and e-mailing), but it seems to go into sleep mode when I have a lot of applications open and especially when watching videos. I've tried researching this problem, but I've haven't found a definitive answer. Right now, the Genius that I've been talking to thinks it may be the RAM. I'm waiting on new shipments of test RAM to arrive at the Apple Store for him to properly diagnose.
Thanks,
Jason
iMac (8,1)
2.8 GHz Intel Core 2 Duo
2x2 GB 800 MHz DDR2 SDRAM
ATI Radeon HD 2600 Pro 256 MB
1TB 7200 RPM SATA ST1000DM003-1CH162
If you want to read the whole time line, I've included it here. I apologize for it being so long.
At first I was running Lion (10.7.5) and the computer would enter sleep mode whenever I was doing anything with video. For example, watching YouTube videos and chatting on FaceTime. And funny enough, I distinctly remember watching a bunch of movies with VLC and the computer did not go to sleep (Although, this is not true anymore). I could wake the computer up and use it, however within a few minutes the computer would re-enter sleep mode. The computer seemed fine and I could access all of my files. Tried resetting SMC and it did not resolve the issue.
I made a Genius appointment to see if they were familiar with the issue. The iMac passed the in-store diagnostics test; it said all the components were functioning properly. He told me to bring it home to do a fresh re-install of my OS and then run my computer to see if the problem persisted. I took it home and reformatted my HDD with a 35-pass erase, re-installed Snow Leopard (10.6.8) and declined to transfer any backups from Time Machine. I was using a fresh system and sure enough, the problem persited. Tried doing the same thing again but with Lion (10.7.5) and still no luck. So I made another appointment and it passed the in-store diagnostics test again. I let them keep the computer for a 24-hour diagnostics test. They told me they would diagnose my computer with the OS on my HDD as well as a copy of OS that the Apple store deemed 'good' on an external HDD. The Genius called me and told me that my HDD failed their 24-hour diagnostics test and recommended I replace it. I initially had a 750 GB HDD, and the Apple Store could only offer me a 500 GB HDD ($200). I opted to take my computer to Carbon Computing, an authorized dealer in Toronto, to have a 1 TB Seagate HDD ($170) installed with no OS on it. I brought it home, performed another 35-pass erase and installed Snow Leopard. Problem still persisted. Repeated with Lion, still unsuccessful. Looking back, I was so excited that I just had to replace the HDD to fix the problem, I forgot to ask the guy if he could recreate the issue.
I began to suspect that it was a heating issue. So I installed Temperature Monitor and smcFanControl, and cleaned the fans as much as I could without taking the computer apart. Without smcFC on I tried to recreate the problem and I noticed that the Power Supply Position 1 reached 95 degrees Celsius, and Graphics Processor Temperature Diode reached 97 degrees Celsius before entering sleep mode. I don't know much about temperature sensors and what they monitor specifically, and so I couldn't draw any conclusions from that data. I turned on smcFC and cranked the optical drive speed to 2000 RPM, HDD to 3000, and CPU to 3000. The computer still went to sleep but the temperatures were below 90 degrees Celsius before entering sleep mode. I've tried researching here and on the internet about normal operating temperature ranges of iMacs and generally found that most do reached that temperature but they do not go to sleep mode.
Then I thought it may be a problem with Lion so I upgraded to Mountain Lion. The issue still persisted. Tried resetting SMC and NVRAM, did not resolve issue.
I called the same Apple Store explaining to them that their recommendation of replacing the HDD did not resolve the issue. They told me to bring it in and have them check it out again. I went through the same process I did before; the iMac passed all of their diagnostic tests. The Genius told me this time he will test out the RAM. He called me and told me that he could replicate the problem and so he proceeded to put in a stick of 'good' Apple RAM, but the computer would not work. He said the 'good' Apple RAM was damaged, either before or in the process of putting it in. He plugged in my old stick of RAM and the computer worked. He tried to recreate the problem and claimed that the computer ran for over 24 hours with an existing movie on my HDD playing and it did not go to sleep mode. However, once I brought it home I played the same movie right away and it turned off 17 minutes into the movie. Tried resetting SMC and NVRAM again, ran the movie again, still went to sleep.
And that's the story for now...

Now to find out WHY it does it at home only. How hot is it at home? Have you checked the AC current/voltage at home?
Well they were able to replicate the issue at the Apple Store the second time I left my computer there. Anyway, we don't have any heating on at my house at the moment. It's usually from around 20-23 degrees Celsius (72-75 F). Temperature Monitor says ambient temperature is 30 degree C though...
I'm not really sure how to check the AC current/voltage at home, but my computer worked before I moved it. So I'm not sure if that is the issue.
I normally only have speakers set up to my computer and a wired keyboard. The speakers are powered separately. I would assume that at the Apple Store only the power cord and wired keyboard are connected.
What is the Power Supply Position? And what does it do?
Thanks for your help!

24" imac goes into sleep mode and lights on circuit flicker

Hi -
I have a 24" imac and have found that when the display goes into sleep mode the lights on the circuit flicker.
I have searched the web and other users have complained of the same issue with no resolution.
Here is a similiar post - https://discussions.apple.com/thread/2606099?start=0&tstart=0.      The resolution is probably you need to get the iMac serviced, what i'm wondering is what is the problem in the imac that is causing the issue.    Is this a defect?
Before anyone questions the circuitry in my house here is what I have verified.
An electrician has come and verified the electric panel is good and all circuit breakers are good.   All circuits in my house are copper, no aluminum.
I can plug the iMac into any circuit and the problem starts right when the Imac's display goes to sleep.     I have owned the iMac for approximately 5 months now (bought it used) and the problem started about a month ago.
Assuming this has to be serviced I dread to wonder the price .
Thanks for anyones help.

The sleep timeout has nothing to do with disk activity. It's based on user input, although some background processes can pre-empt it. If you don't want the machine to sleep automatically, disable automatic sleep in the Energy Saver preference pane.

My iPhone turns off whenever it goes into standby mode and has to be turned back on to work

My iPhone turns off whenever it goes into standby mode and has to be turned back on to work

That's normal behavior. It turns off automatically in order to preserve the battery. Pushing the On/Off button turns it on immediately. This also requires entering the passcode and prevents the phone from being accessed by anyone but you.

When i plug my ipod touch (4th gen) into my car usb port the ipod goes into repeat mode

Why is it that when I plug my ipod touch into the USB port of my Peugeot 508SW that the device goes into repeat mode and the same song is played continuosly?

Hi lllaass
The car handbook certainly states that Ipods can be connected although it doesn't specifically mention which operating systems are supported. The car system is recognising the ipod and playing one tune continuously but you cannot switch it to a different song.
Geordietommo

RBDAPP01 going into SLEEP Mode and Idocs still in 64 status

Hey all,
I have a Inbound Idoc interface which is being processed using RBDAPP01 Program. The Issue I am facing is that the job running the rbdapp01 program goes into sleep mode even though there are idocs present in 64 status. I tried to debug the work process using SM66 but it does not open any debugging window although it says debugging started. If I cancel the Job and run it again it processes those Idocs Any input on how one can resolve this issue?
Thanks.

Hi Aparna,
Here is extract from SAP material on running RBDAPP01 transaction and possible reasons for delay in processing. HOpe this can help you.
To automate the treatment of IDocs, you must run the ABAP program RBDAPP01 (transaction BD20) in job. This program has a very good option for parallel processing which can reduce a lot the time required for treatment. However use it carefully and make sure you set a packetsize high enough to avoid that your SAP system be overwhelm by demands for available dialog tasks (don't forget one dialog task is monopolized per IDocs packed to treat).
Best Regards,
Krishna

Iphone 3g randomly goes into recovery mode all the time?

I have an Iphone 3g version 4.3.5 (8L1). It works fine and i've never dropped it or anything like that. But the first time the problem happened i had just got done sending a text, pushed the lock button, and put it in my pocket. Then a few minutes later i pulled it out to check it and it wouldnt turn on. I held the lock button down and the connect to itunes icon came up, but nothing else. No emergency call option or anything. it wouldnt go away. i connected to itunes and it said it was in recovery mode. I tried to restore it but it came up with an error. i left it and tried again later. i restored but some things were erased. then it worked fine again. but later that night it did it again. so i just plugged it into the charger. in the morning i tried turning it back on again and it turned on without the connect to itunes icon. worked fine all day. but it does this every now and then. when i plug it in it goes back to normal after 10-20 mins. its annoying tho and if im not home my fone is stuck like that until i get back. why does it keep randomly going into recovery mode?

1. The latest iOS version available for the iPhone 3G is 4.2.1, not 4.3.5. Do you actually have an iP3GS or was your iP3G hacked to install 4.3.5?
http://support.apple.com/kb/HT3939
2. "I tried to restore it but it came up with an error." What EXACT error?
3. "i restored but some things were erased" What "things"? Did you get an error again. Were you restoring as new or using a backup?
4. Did you ever restore the phone as NEW without using a backup?

My macbook boots up and only stays on for 30sec and goes into sleep mode

My macbook boots up and only stays on for 30sec and goes into sleep mode! Any suggestions as to why this might be happening? Thanks....

I assume you have checked your sleep settings in System Preferences>Energy saver
I also assume this has just happened recently and spontaneously, not after installing any particular hardware or software or you would probably have mentioned it...if anything new has been added recently, obviously just remove it!
It could be the battery - have your tried it just on mains? If it's a pre unibody MacBook try it without the battery at all. This could happen if you have a non-Apple (cheap Chinese) replacement battery.
Try NVRAM, PRAM & SMC resets (Google if you don't know how)
Try booting from the install media and repairing or reinstalling OS X. (Back up first!)
Just out of interest if you boot from a DVD or go into Open Firmware or Boot Select modes, does it still sleep after 30 seconds or is it just in OS X?

My Z10 automatically goes into bedside mode. Why?

Similar Messages

Maybe you are looking for