My z10 led flashing red when charging and even at battery full it blinks red. no green at any note..
My z10 led flashing red when charging and even at battery full it blinks red. no green at any notification. But at below 10% charging level it blinks with a combination of red and green. Please send me any settings to be changed if.. at full charged no green light is blinking.. how many colours does z10 led have..and when it works and how to make those settings..or was my led not working fine? I am worried so much..plz help me
Your LED is fine, on the Z10 there is not "network signal available" green LED, as you're accustomed to from the legacy devices. At reaching 10%, the LED will blink orange.
Red for message or applicaiton notifications.
if you want to edit and create specific LED color combination, see the third party apps such as BeBuzz or Hub++
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?
I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry. -
My iphone4 is very very hot when charged and used and the camera cant be opened.
my iphone4 is very very hot when charged and used and the camera cant be opened.
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
Should your ipad be off when charging and how long does it take
Should ipad be on or off when charging and how long does it take?
scgirl195 wrote:
Should ipad be on or off?
You can turn it off and charge it or turn it on and charge it. No need to turn it off actually.
scgirl195 wrote:
how long does it take?
It depends on the charge level before start charging. -
I have a new Mac Book Pro Retinal. Should I leave the charger connected while I am at my desk or should I disconnect the charger and all the battery to full cycle?
I leave mine plugged in when at a desk most of the time.
The battery will slowly discharge from 100% to 95% even on wall power, then recharge to 100% ... to save usage of the recharge circuits.
At least once a month I use it on battery and let the battery run down to about 40%.
DO NOT run to "dead" ... that will shorten battery life.
BTW: My battery currently (after 1 year) can still hold 101% of factory-designed charge. -
Its been one month, my iphone 4's display is completely blackout and even its battery is not charging. I tried to restart my iPhone by pressing home and on/off button but it is also not worked. Now I'm in Nepal and here not even a single apple service center. What to do? Please help me.
You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup -
When restoring and updating my iPhone I am getting the following message " iTunes could not update to the carrier settings for your iPhone.an unknown error occurred (1630).can anyone please with a knowledge tell me what I should do please. Thank you
The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........ -
I have a ipad 4th gen with the lightning charging port. I have realised how long it takes to charge and the poor battery life which means I can't take my ipad anywhere. Is there a case that is available that will charge my ipad? I know they are out there for older iPads with the 30pin charger but I can't find one for the lighning 8pin charger.
I don't know what you mean by "poor battery life". If your iPad is working properly you should get 9-10 hours of life.
-
Hi I have recently bought I pad 4 ... It is behaving strange... It's damaging power adapters, I is not charging and even tried other iPad charges they are alao behaving the same way. becoming hot and not charging. Pls suggest what should I do.?
Take it back to where you bought it for replacement or refund.
-
My iPad mini has not been charging well recently but i have purchased a new cable and it still is not charging and has no battery. Someone Help PLEASE
1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush -
i have inserted a disc in my remote disc and it is not working and even i am trying to eject the disc but it is not working ? what to do ?
Would you rather upgrade to windows 8, BlackBerry or Android phones? Do you honestly think those don't have problems?
You waited a lot and chose to buy an early production model. Mistakes happen all the time a factory retools and workers relearn new skills necessary to keep US happy.
Exercise your rights.... Send it back for a new one.
In any case, I feel your frustration. Btw, I love Apple but use a Blackberry -
My iPad 1 keeps flashing the apple logo when charging and won't turn on
I put my iPad on to charge and it keeps displaying the apple logo about every 2 minutes. It won't recharge. It won't switch on and it won't sync. Anybody know what the likely issue is?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I went to the apple store and they hooked up my ipad to a mac and it showed that it was charging and that apps would download. My ipones, touches, and ipods are not having any problems, just this ipad. It seems to be since I updated to the new ios. You can't even do a restore on it because it doesn't recognize it. It shows up top that it's doing that but nothing happens on the ipad. The computer seems to recognize the ipad, itunes recognizes it. It acts like it is communicating with it but it doesn't download anything and won't charge when it's hooked up to the USB port. THe Apple store says there is nothing wrong with this ipad which is about 6 mths old. So what now?
Most USB port do not supply enough current to charge the iPad.
-
I was working on my iPad and it turned off suddenly and now it won't turn back on. It was at least 50% charged and when I tried to connect the charger it still will not come on. Is there a reset button?
Thank you so much! It worked, I was reading around and saw this has happened to a number of iPad users. Thank you for your prompt response, I was so worried I broke it or something.
-
Power LED flashes, firmware updates good, and can still access the router
I have a wrt54G first version as there is no version number. About two months ago, the power led started dropping out and with a reset worked for a day or so, then, it became worse, every hour, and now only a couple of minutes. according to the help side of this site, the router will not be accessible, but it is. I upgraded to the 4.7.1.1 firmware, the problem continues, un plug and start it up. Any ideas? Could it be the 12 volt power supply going bad or over shooting the power?
yes, that is the level, verified at the router. the help side of this site says that if the led flashes like this that it would be corrupt an un accessible, but a restart of the router stops it, and it is accessible, moreover, the upgrade fails since that is the level at the router. just that it is happening about every 15 minutes (8/3) - could it be that comcast is sending packets of ??? to blow out routers? Thee state they don't like people using routers - that you are not supposed to use more than one computer with their broad band connection. Yes - serious, the e have said this twice in the last 6 months. Don't know what it could be, Saturday - Sunday it has not dropped out at all
Maybe you are looking for
-
Possible to fill a list using a custom Workflow in Sharepoint 2013
Is it possible to develop a custom workflow that compares a Contact List and the Active Directory and add any missing people to the list? Or is this a functionality not available with workflows and sharepoint 2013?
-
Oracle 8.1.6 Driver Misbehavior
i have installed oracle 8.1.6 Client(with Driver) on a Fresh Win NT PC.WHen i test database connection through ODBC 32-bit Test,it is failing. Also,WHen i test database connection from java thro' JDbcOdbc Driver,Dr.Watson error(Access violation) occu
-
Need to restrict KFF values on Charge Account Screen in Oracle Apps 11i
Hi, I have a requirement to restrict KFF values based on certain criteria in the charge account screen in Oracle Apps 11i.. Could you pls advise on how this can be achieved. Thanks, Shashank Edited by: Shashank Senan on May 23, 2012 2:53 PM
-
Printer not working with new router
I have a new router and my laptop with Windows XP is working Ok My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests What can I do
-
Hi Everybody, I'm a newbie in oracle world, hope that all the expert out there able to shed some lights on me. i have PHP and Oracle 9i perfectly installed and everything was smooth. Then later on , i installed 6i (Developer Form), after i've restart