My z3 cannot search for provider.

my phone cannot search for provider.

Hi razman199,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
if you continue to have issues after replacing the SIM card, you would be best to contact our Customer Care team to see if they can get the handset checked by a service agent, or simply take the handset back to the place of purchase.
http://support.sonymobile.com/global-en/contactUs/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Cannot search for "@" symbol when using search function

I am trying to create a calculated column which extracts the domain part of an email address. My problem is that no type of search formula (SEARCH or FIND) seems to be able to recognise the "@" symbol so I get an error stating that
"The search TEXT provided to function 'SEARCH' could not be found in the given text"
Even more bizarre is that if I do just a general search in my table (CTRL + F from inside Powerpivot) it cannot find @ symbols either. Could someone please explain why PowerPivot cannot search for the @ symbol (I haven't tested others) and whether there
is a solution?
The formula I was trying to use was:
=SUBSTITUTE(A1, LEFT(A1,FIND("@",A1)),"")
Obviously with A1 replaced by the column name of where my email data is stored.
Any help would be much appreciated.
Thanks.

Both FIND() and SEARCH() should find the "@" in PowerPivot.
I have done it many times.
You probably have one row in your data set that doesn't contain "@". That will cause the error you describe and if one row in a Calculated Column causes an error, every row has an error if you do nothing to account for it.
Try wrapping your formula in an IFERROR([Your Formula], BLANK()).
This should allow it to run successfully on valid rows and will show a blank on any rows that are causing problems.
Once you identify the problem row (or rows) you can make a decision about how to deal with it.

'Help cannot search for that phrase'

I am getting the message 'Help cannot search for that phrase' while searching for 'xml' in a chm (generated using RH9). The old CHM (generated using RH8) shows the results for the keyword xml. Is this a known issue? Any workaround to resolve this issue?

I just tried in a Rh10 project and got the same result in a CHM but not in WebHelp, there the search worked so I suspect it is something in the Microsoft Help Compiler.
There is a solution if you can upgrade to Rh10. That allows you to generate WebHelp and then convert it to a skinned CHM. I just tried that and there the search worked in the CHM.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Itunes store is a white screen, cannot search for music, any ideas?

When I open my ITunes and go to ITunes store it loads but just gives me a blank white screen, I cannot search for anything to purchase, my ITunes needs updating but I no longer get the pop up notification for it, any ideas?

Hey maggz2008,
I have an article for you that should be able to help you address this issue with your ability to reach the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for using the Apple Support Communities!
Cheers,
Braden

Mountain Lion Mail cannot search for non-alpha characters in Subject Lines

Under 10.8.3, Mail 6.3 often cannot successfully find messages if the search string contains a non-alpha character.
I have only tested this searching for Subject lines that are KNOWN to contain non-alpha characters
Specfic examples:
Subject starts with "[ABC..."
Mail cannot find it if you search using "[ABC"
Mail CAN find it if you search using just "ABC"
Subject contains the numeral "2"
Mail cannont find it if you enter "2" as the search string...even if you further constrain the search to "Subject contains: 2"
Other problem characters I have found:
The failure when using square bracket is a real pain since a lot of mailing lists are tagged using strings wrapped in square brackets.
Sometimes it WORKS when I include multiple non-alpha characters in the search string, like "55" or "4/19"
Anyone else see this?

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Error 206, cannot search for downloads

I purchased an album in Itunes but when I try to download I get the message 'unable to search for downloads, unknown error 206. I can donwload apps without a problem. I contacted apple but they cannot help me. I switched of my firewall but this did not help. Anyone has a fix?

Both FIND() and SEARCH() should find the "@" in PowerPivot.
I have done it many times.
You probably have one row in your data set that doesn't contain "@". That will cause the error you describe and if one row in a Calculated Column causes an error, every row has an error if you do nothing to account for it.
Try wrapping your formula in an IFERROR([Your Formula], BLANK()).
This should allow it to run successfully on valid rows and will show a blank on any rows that are causing problems.
Once you identify the problem row (or rows) you can make a decision about how to deal with it.

Iphone 5 GSM frequently search for provider, this after update ios 8.1

I update my Iphone 5 via backup and complete new install. Now the Iphone frequently is searching for a provider. Plz help?

hi Franxis . . . below is what I had to do . . . I believe that my crashing, perpetual rebooting and reset loops was due to some combination of my iPhone 5's hardware, iOS 8.1.1, and some applications.
I upgraded to iOS 8.1.1 upon release. approx. 10 hours after this upgrade, the iPhone 5 displayed a bright white screen. tried hard reset & phone would not turn on. iPhone eventually turned on, to display lines & colors, but iPhone was inoperable - would not reset using sleep / home key combination or connection to iTunes
I brought my iPhone to the Retail Store - RS was able to reset phone, and then began the process of restoring from my last backup there & said it would continue throughout the day. After the restore from backup completed, the crashing, perpetual rebooting and reset loops started again.
1. I was eventually able to perform a DFU & installed the phone as new (factory reset, I believe).
2. I did NOT perform a restore from backup.
3. The phone seems to run fine now
The long story is that days 1-3, after the DFU / factory reset, the phone ran fine. And, on day 4, I began installing Apps again. When I installed the fourth App, and the phone crashed, changing colors, perpetually rebooting, and unable to start / get into a functional mode. On day 4, I had to leave the phone alone for a while - was eventually able to perform another DFU - factory reset - and again no restore from backup. Today - day 5 - my iPhone is running fine again and I installed 11 Apps now (not the one that crashed my iPhone), accessed them all, and phone seems fine.
For me, it seems like an App, or some Apps that I was running caused the issues for me - it could be a combination of everything (certain Apps + iOS 8.1.1 + hardware not getting along).

Cannot search for name when assign questionnaire in E-Recruitment

Hi,
I am currently using e-recruitment (version 603), we have a problem where when we try to assign a questionnaire to a person, we can't search this particular person. The name was not displayed on the searched result list. But when I checked using BP, HRP1000 and HRP5102 I can see the record of this person. Any ideas why this persons does not appears on the search result?
Rgds
Ridzuan

Nicole and Roman
Thanks for your feedback. Nicole, yes your are right I am referring to the processor, this person does have BUP003 role. Roman, I have also checked the infotype 5102, the field IS_INACTIVE is NOT set to 'X'.
For you information, what I found was this person have an empty Address under Address Overview when I run the BP transaction for his profile. Once the address field was filled with his address, we are now able to search for his name and assign him as the processor.
Your feedback have help me to solve this issues, once again thank you.
Rgds
Ridzuan

I cannot search for playlistson youtube with firefox 4

I am wondering if this is a know issue. I can search for playlists on youtube.com with IE 8 x64, IE 8, Chrome, Firefox 3.6.xx, but not Firefox 4.

Has the problem been resolved, or is it still ongoing?
Could you let us know please? If you're still experiencing the issue, we'll try to assist you further.

Systems not appearing/Cannot search for systems

Greetings,
I have defined two systems that call BAPI's (via RFC) on an instance of SAP that we utilize for testing. Using Visual Composer 7.0, we were able to use the "Find Data" option to search our portal instance for systems, but this feature does not seem to be present in the CE 7.1 version of VC.
We were initially trying to migrate the Visual Composer iViews that we created from our 7.0 portal to our CE 7.1 portal. We defined these two systems in the portal and assigned the correct permissions and connection strings before performing the migration. The migration wizard in VC asked us to define the new system names, but the dropdown box that is supposed to contain the defined systems was empty.
My questions are...
1. Even though we've defined the systems in CE 7.1, why are they not appearing during the migration process as options?
2. In VC 7.1, the search function does lot list systems as an option. I have tried searching all of Portal Content, but no systems appear in the results. How do I search for systems defined in the portal so that I can define a data source?
Thanks and I appreciate your help.
-= Michael

Hi Michael,
first of all the connection to an ABAP system via portal system object as you have used it in VC7.0 should also work in VC7.1. Maybe there is an issue with your configuration. There is also another option to setup the connection via RFC connection in the SAP NetWeaver Administrator. Anyway I suggest that you try to establish a connection via RFC, which is described in the [Wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc71/rfc+destination]. If this connection will work then you should investigate why the connection via system portal system object is not working.
Please let me know if you have success with the RFC connection.
Best Regards,
Marcel

Win 7 SP1 Windows cannot search for new updates

I am not able to get new updates. I am running Win 7 SP1 and I have tried the build in update repair Tool. I have also tried to download and run FIX IT from Windows. I have also tried to change and reset the clock and to remove the latest udtates to
see if they were the problem. Nothing seems to help.
Any sugestions?

Hi skhieds,
Have you checked the KB article below?
"Windows Update Cannot Check For Updates" error message when you try to install updates
The above article talking about the services not running well, you may follow the steps to check the issue.
You may try to boot into cleanboot and run Windows udpate there.
How to perform a clean boot in Windows
2, rebuild the SoftwareDistribution folder;
net stop wuauserv
del c:\windows\SoftwareDistribution /q /s
net start wuauserv
3, run SFC /scannow, after that, download the readness tool and run it:
What is the System Update Readiness Tool?
4, reset Windows update components:
How do I reset Windows Update components?
Best regards
Michael Shao
TechNet Community Support

Starting off with Game Center - cannot search for Games

Hello. This will be obvious to existing users! I have set up as a user with Game Center and wish to search for Games Center-compatible games. Tap on Games - yes. Tap on Search. Er..no. I have Games Rcommendations in a grid - nothing else. No buttons, no search capability. I have obviously missed something. Can anyone help?

Hi and thanks for your reply. p296 of the iPad user guide specifies that in the App Store you tap Games then Find Game Center Games and it is this option which doesn't seem to exist (unless I've missed something).

Finder cannot searching for NTFS formatted external hard disk

MacBookAir,1.8GhZ,Memory 4GB1600 MHz DDR3
osx10.9.3
Finder can show and open the files from the external hard disk but can not searching for the files.

Barney-15E wrote:
Tuxera or paragon will give you write access, but I don't know if that will allow Spotlight to work on those drives.
A brief experiment suggests that Spotlight does not index an NTFS volume driven by Paragon NTFS. I don't have a copy of Tuxera to test.
Sorry, cchaikittiporn. Paragon does not seem to be a solution for your issue.

Spotlight cannot search for type & creator codes?

I want to find some old ClarisWorks documents that I know are on my computer somewhere. Simple, I thought: Just search for documents dated before 2000 with creator code BOBO. But looking through the list of search parameters in Spotlight, I don't find either type or creator code. I know Mac OS X no longer uses these metadata, but they can still be useful, as in cases like this. Am I missing something? Is there a way for Spotlight to search on type & creator codes?

Thanks for the response. I solved my problem by just looking through folders of old files and checking dates of those with AppleWorks icons. Very 21st century. I knew there must be some reason I thought I could do such a search, so I fired up my old 'Pismo' PowerBook and indeed, the Finder search utility in 10.3.9 allows searching for Type and Creator codes. It also will search only on those codes, or on a date or other parameter; while with Spotlight I could find no way to search for, say, all files dated before 1/1/1999 -- it requires something entered in the top field, i.e. a word to search for either in the file's contents or its name. So I put in "the" and got a lot of results, but of course minus any file that doesn't contain "the". Not so smart.
I've never much liked Spotlight, which is way overkill for 95+% of the searching I do; I almost never used it in 10.4 (used Easy Find); in 10.5 at least it's fast enough to not be a major annoyance, though the fact that I can't make "File Name" the default requires me to keep a Spotlight window open in the Finder all the time (or have to manually click on "File Name" every time I want to do a search). Sure it's nice to be able to search the contents of files -- when I need to, but that's almost never. Meanwhile, Spotlight remains far inferior in simple, day-to-day usability to 10.3's Find utility.
So how do you find out how to do such a "Raw Query" search? "kMDItemKind" is not an immediately intuitive term, at least for ordinary mortals such as myself.

My search engines do not work. I can access all my bookmarked items, but I cannot search for anything new. I followed all the troubleshooting steps I found but it did not work.

My search engines do not work. I can access all my bookmarked items but I cannot perform any new searches. This problem has been happening since this morning. I followed all the troubleshooting steps that I could find and nothing has worked.

Just to make sure, did you check the ring/silent button on the side of the phone? If it is set to "mute" you can still hear your selected ringtone in settings/sound, for example.

My z3 cannot search for provider.

Similar Messages

Maybe you are looking for